Chord Ultima Pre 2 Manual

Chord Modtager Ultima Pre 2

Læs gratis den danske manual til Chord Ultima Pre 2 (3 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Chord Ultima Pre 2, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/3
Connecting ULTIMA PRE 2 to a power amplifier 4.0
To connect ULTIMA PRE 2 to your power amplifier, choose either XLR
or RCA.
It is important to know that if you are using the volume dial or modifying
the balance on ULTIMA PRE 2, it will only eect this output.
Chord Electronics
ULTIMA PRE 2 | Quickstart Manual
The Pumphouse, Farleigh Lane, East Farleigh, Kent, ME16 9NB, United Kingdom
info@chordelectronics.co.uk
chordelectronics.co.uk
Quickstart Manual
Introduction 1.0
Welcome to the ULTIMA PRE 2 Quickstart Guide. This shortened guide
is supplementary to the main manual which should be referred to for
full safety and operational information.
Please note, more information on any of these topics is listed within the
full manual found under the product page:
chordelectronics.co.uk/product/ultima-pre2
Warranty 1.1
The ULTIMA PRE 2 comes with a comprehensive 5-year warranty.
To activate the warranty, please register your device via the Chord
Electronics website:
chordelectronics.co.uk/register-product
Connecting ULTIMA PRE 2 to a source 3.0
First, you must ensure that ULTIMA PRE 2, and any connecting
equipment, is turned o.
You can connect ULTIMA PRE 2 to a source using any of the
highlighted inputs shown below.
Please note that each input is arranged as a stereo pair, right and then
left which is indicated on the furthermost sides of the inputs. Later,
when you come to switch ULTIMA PRE 2 on, each pair of inputs will
be shown as ‘LINE ’ on the display. LINE 1-4 begins with the pairs of X
XLRs and LINE 5, 6, T1 and T2 is the RCA pair next to these and so on.
Note that the connectors on the right hand side of the unit are
outputs and bypass ports. You must not connect any inputs here.
Balanced
input 1-4
Unbalanced
line 5-8
XLR and
RCA
outputs
Please ensure there is sucient ventilation around ULTIMA PRE 2 at
all times. Avoid placing ULTIMA PRE 2 in enclosed spaces, on soft
surfaces, near sources of heat and never cover its ventilation holes. For
optimum operation and ventilation leave some space around the unit.
Placement 2.0

Produkt Specifikationer

Mærke: Chord
Kategori: Modtager
Model: Ultima Pre 2

Har du brug for hjælp?

Hvis du har brug for hjælp til Chord Ultima Pre 2 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Modtager Chord Manualer

Chord

Chord CPA 2500 Manual

3 September 2024
Chord

Chord CB-15BT Manual

28 August 2024
Chord

Chord CA-15BT Manual

28 August 2024
Chord

Chord CG-10BT Manual

28 August 2024
Chord

Chord BLU MKII Manual

18 August 2024
Chord

Chord CPA 5000 Manual

11 August 2024
Chord

Chord SPM 1400 Mk2 Manual

3 August 2024
Chord

Chord 2yu Manual

3 August 2024
Chord

Chord Dave Manual

29 Juli 2024
Chord

Chord SPM 3005 Manual

26 Juli 2024

Modtager Manualer

Nyeste Modtager Manualer

MB Quart

MB Quart NA2-400.1 Manual

17 Juni 2025
DS18

DS18 GEN-X G8400.4D Manual

17 Juni 2025
Hifonics

Hifonics Zeus Expansion ZXR750/1E Manual

17 Juni 2025
Futaba

Futaba R7206 SB Manual

16 Juni 2025
DS18

DS18 FRP-3.5K Manual

16 Juni 2025
DS18

DS18 SMD-300.4AB Manual

16 Juni 2025
DS18

DS18 SMD-3000.1D Manual

16 Juni 2025
DS18

DS18 GEN-X G3600.1D Manual

16 Juni 2025
DS18

DS18 HYDRO NXL-X1000.1D Manual

16 Juni 2025
DS18

DS18 SMD-200.4AB Manual

16 Juni 2025