Chord CPA 2500 Manual

Chord Modtager CPA 2500

Læs gratis den danske manual til Chord CPA 2500 (12 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Chord CPA 2500, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
welcome
Thank you for buying a Chord product.
Before you start to enjoy using to your Chord product, please take a couple of minutes to read how to connect your audio
equipment and loudspeakers to your pre-amplifier or integrated amplifier and how to maximise your listening experience.
user guide for CPA 2500 pre-amplifier
The pre-amplifier is the control centre of your system. By connecting your audio sources to it you can choose the source you
want at any particular time and control it.
You can also adjust the balance and volume before the signal is sent to a power amplifier. Your pre-amplifier can be
operated manually or via the Chord remote control.
background
We want you to be confident using your new Chord amplifier.
You’re probably an audiophile with extensive knowledge of audio equipment. However, you may not be!
So in the following section we explain a few basics to help you get started, or get you back up to speed if you’re a little rusty.
connecting your equipment
Chord amplifiers are supplied with and designed to be connected using balanced inputs. The interconnecting cables you use will
depend on the available input and output sockets on your other equipment. We have installed unbalanced inputs on all Chord
equipment, thus enabling you to mix Chord and other manufacturer’s equipment. Whichever cable you choose it is important
to make sure it is fully screened to avoid any noise problems.
Balanced inputs carry twice the strength of signal of unbalanced inputs and are able to be fed down long lengths
of cable with less deterioration of signal. They are also less prone to interference than unbalanced inputs.
Balanced inputs have three pins and use Neutric XLR style connectors. Pin 1 is earth, pin 2 is positive and pin 3
is negative.
Unbalanced inputs use RCA phono connectors which are gold plated with teflon high performance
dielectric insulators for optimum performance.
Speakers
Power Amplifier
or integrated
amplifier
Pre-amplifier
Audio Source

Produkt Specifikationer

Mærke: Chord
Kategori: Modtager
Model: CPA 2500

Har du brug for hjælp?

Hvis du har brug for hjælp til Chord CPA 2500 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Modtager Chord Manualer

Chord

Chord CPA 2500 Manual

3 September 2024
Chord

Chord CB-15BT Manual

28 August 2024
Chord

Chord CA-15BT Manual

28 August 2024
Chord

Chord CG-10BT Manual

28 August 2024
Chord

Chord BLU MKII Manual

18 August 2024
Chord

Chord CPA 5000 Manual

11 August 2024
Chord

Chord SPM 1400 Mk2 Manual

3 August 2024
Chord

Chord 2yu Manual

3 August 2024
Chord

Chord Dave Manual

29 Juli 2024
Chord

Chord SPM 3005 Manual

26 Juli 2024

Modtager Manualer

Nyeste Modtager Manualer

Ram Audio

Ram Audio MDi8-6K Manual

13 August 2025
Tangent

Tangent Ampster TV II Manual

13 August 2025
Ram Audio

Ram Audio Pi4-6K D Manual

13 August 2025
Ram Audio

Ram Audio MDi8-2K7 D BS/P Manual

13 August 2025
Audiolab

Audiolab 8300MB Manual

13 August 2025
ESX

ESX Signum SE1500.1 Manual

13 August 2025
Pyle

Pyle PFOCUS16 Manual

12 August 2025
Musical Fidelity

Musical Fidelity B1xi Manual

12 August 2025
Artsound

Artsound MX60MKII Manual

12 August 2025
NAD

NAD CI 8-120 DSP V2 Manual

12 August 2025