Chord SPM 1400 Mk2 Manual

Chord Modtager SPM 1400 Mk2

Læs gratis den danske manual til Chord SPM 1400 Mk2 (5 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Chord SPM 1400 Mk2, eller vil du spørge andre brugere om produktet?

Side 1/5
SPM 1400 MK2
POWER AMPLIFIER MANUAL
OPERATING INSTRUCTIONS
INSTALLATION
Your amplier should be positioned to ensure a free ow of air over the rear heat sink and through the upper and
lower grilles. When driven continuously at well above average listening levels, the temperature on the heat sink may
exceed 50oC. This is not a fault, but an indication of the need for adequate ventilation.
Please ensure that the IEC mains lead is correctly terminated.
UK/EUROPE Brown = LIVE = Black USA/CANADA
Blue = NEUTRAL = White
Yellow/Green = EARTH = Green
THE SPM 1400 Mk 2 MUST BE EARTHED AT ALL TIMES VIA ITS OWN MAINS LEAD.
FAILURE TO DO THIS MAY BE HAZARDOUS.
CE This unit complies with EN 50081-1 & IEC 801/2
It has come to light that, in some European
countries a hum may occur if Pre and Power
Ampliers are connected to mains wall sockets
which do not have an earth. Please ensure
that, if this is the case, the pre and power amps
are connected via a multi-way mains block
which contains an earth point at each socket
outlet. This is to ensure that the chassis
metalwork of each item is connected together
and Chord Electronics Limited rmly
recommends that an earthing method for the
building is implemented.


Produkt Specifikationer

Mærke: Chord
Kategori: Modtager
Model: SPM 1400 Mk2

Har du brug for hjælp?

Hvis du har brug for hjælp til Chord SPM 1400 Mk2 stil et spørgsmål nedenfor, og andre brugere vil svare dig