Clarion CAA-185-200 Manual

Clarion dashcam CAA-185-200

Læs gratis den danske manual til Clarion CAA-185-200 (1 sider) i kategorien dashcam. Denne vejledning er vurderet som hjælpsom af 49 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 25 anmeldelser. Har du et spørgsmål om Clarion CAA-185-200, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Light

green

Black

Red

GND

To ACC power supply (12 V)

Used to provide a 12 V power supply

to an additional device.

To reverse gear signal (12 V)

FIG.2

CAA-185-200

CCD Camera Power Supply Box

Installation Instructions

CCD camera power supply box: ·············

2. Bag of accessories: ················· 1 bag

Electro taps: ·············································· 2

Velcro: ······················································· 1

3. Bag of accessories: ················· 1 bag

Tapping screws: ········································ 2

4. Bag of accessories: ················· 1 bag

Connector cable (red): ······························ 1

Connector cable (light green): ·················· 1

Connector cable (black): ··························· 1

Connector cable (red): ······························ 1

5. RCA cable ········································ 1

4. Mounting Procedure

Mounting the CCD Camera Power Supply Box

Mount the CCD camera power supply box in a location such as under a seat using either the

supplied tapping screws (ø4 x 12) or velcro.

■Mounting Using Tapping Screws

■Mounting Using Velcro

CCD camera

power supply box

Velcro

1. If harnesses will come into contact with the sharp edges of metal plates, or the like, protect

them using grommets or insulation tubes.

2. Before drilling any holes in a vehicle, make sure that there are no electrical wires, brake fluid

pipes, or the like, running behind to surface to be drilled.

CAUTION

Fig.4Fig.3

Clarion Co., Ltd.

Printed in Japan 2006/12 284-8050-02

* Thoroughly wipe any dirt from the mounting

surface.

* Remove the separator from the back of the

velcro and apply it to the mounting surface.

ø4✕12

CCD camera

power supply box

2. Package Contents

3-1. System Connection Example

3-2. Connecting the Supplied Cables

Hook up the supplied connector cables as shown in Fig. 2.

CCD camera

power supply box

CCD camera

Light green

Black

Red

To ACC power supply (12 V)

GND

To reverse gear

signal (12 V)

For making connections to a TV

or video monitor equipped

with a video input jack

Fig.1

The tip of the cable is

cut at a convenient

length.

Not needed

From the unit

Latch

Stopper

From the vehicle side

Power cable

From the unit

Hook

Power cable

Coupler connected

to another piece of

equipment

Pass the vehicle-side cable through and

bend back in the direction of the arrow.

Unit-side cable

Vehicle-side cable

Close with pliers until the latch engages.

Vehicle-side wire

As illustrated in the diagram, the intermediate

cable is brought against the stopper and bent

back in the direction of the arrow.

3-3. Power Cable Connections

When connection cannot be made to the terminals, use the supplied Electro Tap to make

the connection as illustrated in the diagram.

3. Making Connections

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to consult the dealer or an experienced radio/TV technician

for help.

INFORMATION FOR USERS:.

CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTURER WILL

VOID THE WARRANTY AND WILL VIOLATE FCC APPROVAL.

1. Precautions

Produkt Specifikationer

Mærke:	Clarion
Kategori:	dashcam
Model:	CAA-185-200

Har du brug for hjælp?

Hvis du har brug for hjælp til Clarion CAA-185-200 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

dashcam Clarion Manualer

Clarion CAA-185-200 Manual

14 August 2024

Clarion CC6300E Manual

14 August 2024

Clarion CJ-7500E Manual

13 August 2024

Clarion EG-2300E Manual

13 August 2024

Clarion UG-2176A Manual

13 August 2024

Clarion CC1601A Manual

13 August 2024

Clarion CC-6600E Manual

10 August 2024

Clarion CJ-7600E Manual

9 August 2024

Clarion CC-2000E Manual

8 August 2024

Clarion CC-2001E Manual

8 August 2024

dashcam Manualer

Nyeste dashcam Manualer

Mio MiVue J20 Manual

21 Februar 2025

BlackVue CM100GLTE Manual

19 Februar 2025

Kogan KAACCHWKITA Manual

11 Februar 2025

Hikvision AE-DC5313-C6 Manual

7 Februar 2025

Thinkware X1000 Manual

2 Februar 2025

Navman DDR MiVue 740 Manual

14 Januar 2025

Navman Smart Box II Manual

14 Januar 2025

Rexing V33 Manual

13 Januar 2025

Alpine PKG-RSE3DVD Manual

12 Januar 2025

Cobra SC 250R Manual

11 Januar 2025