Cocraft HG 70 Manual

Cocraft Limpistol HG 70

Læs gratis den danske manual til Cocraft HG 70 (4 sider) i kategorien Limpistol. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Cocraft HG 70, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
UNITED KINGDOM • www.clasohlson.co.uk
1
4
5
67
2
3
Ver. 20220204
Glue Gun
Art.no 41-2581 Model FL-159
Please read theentire instruction manual before using theproduct and then save
it for future reference. Wereserve theright for any errors in text or images and any
necessary changes made to technicaldata. Intheevent of technical problems or
other queries, please contact our Customer Services.
Safety
Symbol guide
Caution! The nozzle and adjoining surfaces become hot during use.
Contact may cause burns.
Class II product. Double-insulated.
Warning for apossible hazard which could lead to serious personal injury
and/or damage to theproduct if thestated instructions are not followed.
Warning for anelectrical shock hazard.
Unplug theproduct immediately if themains lead has been damaged
or when inspectingit.
Use respiratory protection.
General safety instructions
• This product must not be used by anyone (including children) suffering from
physical or mental impairment. Thisproduct should not be used by anyone
that has not read theinstruction manual unless they have been instructed
in its use by someone who will take responsibility for their safety. Neverlet
children play with theproduct.
• Keep children away from thepackaging materials. Choking hazard.
• Theproduct should not be used if it is in any way damaged or malfunctioning.
• Never attempt to modify theproduct in anyway.
• Any repairs should only be carried out by qualified service technicians.
Electrical safety
Warning for anelectrical shock hazard.
• Do not use theproduct if it is missing parts or if its housing has
been damaged in anyway.
• Do not place theproduct where there is arisk of it falling into water or other
types of liquid.
• Theproduct should only be connected to a220−240 V, 50 Hz electrical outlet.
• Outdoor use of theproduct requires that any wall socket used be equipped
with amax 30 mA RCD. ChecktheRCD before eachuse. Useof anRCD
reduces therisk of electricshock.
• Themains lead should be checked regularly. Neveruse theproduct if
themains lead or plug is damaged.
• If themains lead has been damaged, it must only be replaced by
themanufacturer, authorised service facility or qualified tradesman.
Thisis to prevent therisk of electric shock orfire.
• Never touch themains plug if your hands are moist orwet.
• Always grip theplug when unplugging theproduct, never pull themainslead.
• Never carry or hang theproduct by its mainslead.
Product specic safety instructions
• Place theproduct in astanding position after use and let it cool sufficiently
before putting it away for storage.
• Do not leave theproduct unsupervised when it is connected to anelectrical socket.
• Never cover theproduct when it is connected to anelectrical socket.
• Never expose theproduct to rain or moisture.
• Always disconnect themains lead from thewall socket when you have
finished work or when theproduct is not beingused.
• Unplug theproduct and let it cool completely before putting it away for storage.
• Both theglue and nozzle become very hot duringuse. Thiscan cause burn
injuries. Rinse any burn with cold water and keep it under running water for
sometime.
• Only use glue sticks specifically designed for this product.
• Always place theproduct on its stand when it is not inuse.
Product description
Contents
• 1 × gluegun
• 6 × glue sticks, Ø 11×150mm
Application
This glue gun can be used for gluing wood, paper, cardboard and certain plastic
materials.
Glue gun
1. Nozzle
2. Glue stickhole
3. Gluestick
4. Handle
5. Mainslead
6. Trigger
7. Stand
• Plug theglue gun into anelectrical socket and rest it on its stand (7) for
3–5minutes to let it reach operating temperature.
Gluing
Use respiratory protection.
Warning: Burnhazard. Themolten adhesive and nozzle
reach temperatures of up to 200 °C. Avoidall skin contact
with thenozzle (1) and molten adhesive whilst working.
1. Grip theglue gun by thehandle (4) and insert aglue stick into thehole (2) at
therear of thegun.
2. Squeeze thetrigger (6) afew times until thefeed mechanism has gripped
thegluestick.
3. Gently squeeze thetrigger to apply molten adhesive to thesurfaces to be
glued together.
4. Release thetrigger and squeeze it again if thetrigger was squeezed all
theway in before you had finished applying glue to thecontact surfaces.
5. Release thetrigger when thesurfaces have been coated withglue.
6. Immediately press thesurfaces together and hold them in position for
15seconds.
7. Let any excess glue cool and remove it with asharpknife.
8. Unplug theglue gun from thewall socket to switch thegunoff.
9. Rest theglue gun on its stand to cool completely before putting itaway.
Warning: Donot attempt to remove theglue stick from thegluegun.
Doingso can result in personal injury and/or damage theproduct.
Care and maintenance
• Always unplug theproduct from thewall socket before cleaning
• Clean theproduct using alightly moistenedcloth. Useonly mild
cleaning agents, never solvents or corrosive chemicals.
Responsible disposal
This symbol indicates that this product should not be disposed
of with general householdwaste. Thisapplies throughout
theentire EU. Inorder to prevent any harm to theenvironment
or health hazards caused by incorrect waste disposal,
theproduct must be handed in for recycling so that thematerial
can be disposed of in aresponsible manner. Whenrecycling
your product, take it to your local collection facility or contact
theplace of purchase. Theywill ensure that theproduct is
disposed of in anenvironmentally sound manner.
Specications
Power supply 220−240 V AC, 50 Hz
Power 25 (70) W
Mains lead 1.4 m
Protection class II
Warm-up time 3–5min
Glue sticks Ø 11mm
Weight 0.2 kg
Instructions for use
Preparations
• Keep thework area clean and welllit.
• Clean thecontact surfaces. Thesurfaces should be dry and clear of dust or
grease. Smooth surfaces should be roughed before gluing.

Produkt Specifikationer

Mærke: Cocraft
Kategori: Limpistol
Model: HG 70

Har du brug for hjælp?

Hvis du har brug for hjælp til Cocraft HG 70 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Limpistol Cocraft Manualer

Cocraft

Cocraft HG 200 Manual

7 September 2025
Cocraft

Cocraft HG 500-D Manual

19 August 2024
Cocraft

Cocraft HGM 3.6-LI Manual

12 August 2024
Cocraft

Cocraft HG 80 Manual

10 August 2024
Cocraft

Cocraft HG 70 Manual

7 August 2024

Limpistol Manualer

Nyeste Limpistol Manualer

NEO Tools

NEO Tools 17-102 Manual

5 December 2025
Vevor

Vevor LD-821A Manual

24 November 2025
Vevor

Vevor LD-868 Manual

20 November 2025
Vevor

Vevor LD-8207 Manual

20 November 2025
Rapid

Rapid EG Point EG130 Manual

6 Oktober 2025
Rapid

Rapid G1000 Manual

6 Oktober 2025
Draper

Draper 70836 Manual

2 Oktober 2025
NEO Tools

NEO Tools 17-096 Manual

29 September 2025
NEO Tools

NEO Tools 17-084 Manual

29 September 2025
NEO Tools

NEO Tools 17-083 Manual

28 September 2025