Cocraft HM 210 Manual

Cocraft Sav HM 210

Læs gratis den danske manual til Cocraft HM 210 (64 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Cocraft HM 210, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/64
ENGLISHSVENSKANORSKSUOMIDEUTSCH
Important!
Read the entire instruction manual
carefully and make sure that you fully
understand it before you use the
equipment. Keep the manual for future
reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den
innan du använder utrustningen. Spara
bruksanvisningen för framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre
deg om at du forstår dem, før du tar
produktet i bruk. Ta vare på anvisningene
for seinere bruk.
Tärkeää tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin
alat käyttää laitetta. Säilytä ohjeet
myöhempää tarvetta varten.
Wichtiger Hinweis:
Vor Inbetriebnahme die komplette
Bedienungsanleitung sorgfältig
durchlesen und aufbewahren.
HM 210
VARIABLE MITRE SETTING 45° RIGHT/LEFT
1200 W
18-3204 ∙ 40-7895
MITRE SAW
KAP- OCH GERINGSSÅG
KAPP- OG GJÆRESÅG
KATKAISU- JA JIIRISAHA
KAPP- UND GEHRUNGSSÄGE
Ver. 20160719
Original instructions
Bruksanvisning i original
Originalbruksanvisning
Alkuperäinen käyttöohje
Original Bedienungsanleitung
Art.no Model
18-3204 92109-UK
40-7895 92109
ENGLISH
2
1200 W Compound Mitre Saw
Art. no 18-3204 Model 92109-UK
40-7895 92109
Read through theentire user guide before using theproduct and save theguide for future reference.
We cannot accept responsibility for any errors in thetext or pictures and reserve theright to make
changes to technical data. If you have technical problems or questions, contact our customer
service (see addresses on thelast page).
Safety
General safety rules for your safety and the safety of others
• Keep thework area clean. Cluttered surfaces and workbenches can result in accidents.
• Do not use themachine in anenvironment where risks are present. Electrical machines must
not be used on damp or wet surfaces or in rain. Provide good lighting in thework area.
Provide ample air exchange where work produces dust. Never use electrical machines/tools
where they might cause fire or explosion.
• Avoid electric shock. Avoid contact between your body and earthed objects such as water
pipes, radiators, cookers etc. when using electrical machines or tools. Contact with these
may cause electric shock.
• Keep children and visitors away. All children and visitors should be kept at asafe distance
from electrical machines and tools or electric cables in thework area.
• Store themachines where children cannot get at them. When electrical machines/tools are
not in use, store them under lock and key or out of thereach of children.
• Do not force themachine. It does its job best at thefeed rate for which it was designed.
• Use thecorrect tool. Do not force atool or anattachment to perform anoperation for which
it was not designed.
• Wear suitable clothing. Do not wear loose clothing, gloves, necklaces, rings, necklaces or
other items that might get caught in rotating parts. Non-slip shoes are recommended. If you
have long hair, wear ahairnet (or equivalent).
• Always wear safety glasses. Ordinary glasses do not provide enough protection. Wear adust
filter or protective mask when doing work which produces dust.
• Use adust extraction system. If themachine is designed for it, use extraction equipment to
remove and collect dust and chips. Make sure that theequipment is used properly and is
emptied when necessary.
• Do not mistreat themains lead. Never carry themachine by themains lead. Do not unplug
themachine by tugging on themains lead. To do this, pull on theplug. Make sure that
themains lead does not come into contact with heat, oil or sharp edges.
• Secure theworkpiece properly. Use clamps or avice where possible, so that you can operate
thetool with two hands. This is safer than using one hand to hold theobject.
• Do not stretch too far. Always stand securely and properly balanced.
• Keep thetools in shape. For optimal efficiency and asafe result, make sure that they are
clean and that thecutting edges are sharp. Follow therecommendations in themanual for
lubrication and replacement of accessories. Check themains lead regularly. If it is damaged,
it must be replaced by aqualified service technician. Check all extension leads regularly for
damage. Make sure that thehandles and controls of themachine/tool are dry, clean and free
of oil, grease, etc.

Produkt Specifikationer

Mærke: Cocraft
Kategori: Sav
Model: HM 210

Har du brug for hjælp?

Hvis du har brug for hjælp til Cocraft HM 210 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Sav Cocraft Manualer

Cocraft

Cocraft HJ 801-T Manual

8 September 2025
Cocraft

Cocraft HMS 210-L Manual

7 September 2025
Cocraft

Cocraft HM 210 Manual

7 September 2025
Cocraft

Cocraft LXC JS18 Manual

7 September 2025
Cocraft

Cocraft M1H-ZP2-4-250 Manual

11 Juni 2024
Cocraft

Cocraft LXC RS18 Manual

11 Juni 2024
Cocraft

Cocraft PRO C1600-M Manual

11 Juni 2024
Cocraft

Cocraft HJ 800-T Manual

11 Juni 2024

Sav Manualer

Nyeste Sav Manualer

DeWalt

DeWalt DWCS600 Manual

8 September 2025
DeWalt

DeWalt DCCS620 Manual

8 September 2025
DeWalt

DeWalt DWOAS6PS Manual

8 September 2025
DeWalt

DeWalt DCM200 Manual

8 September 2025
DeWalt

DeWalt DCCS677 Manual

8 September 2025
DeWalt

DeWalt DCB1106 Manual

8 September 2025
DeWalt

DeWalt DCCS674 Manual

8 September 2025
DeWalt

DeWalt DCCS672 Manual

7 September 2025
Graphite

Graphite 58G954 Manual

7 September 2025
DeWalt

DeWalt DCCS670 Manual

7 September 2025