Cocraft HS 30L Manual

Cocraft Loddemaskine HS 30L

Læs gratis den danske manual til Cocraft HS 30L (5 sider) i kategorien Loddemaskine. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om Cocraft HS 30L, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

GREAT BRITAIN • CUSTOMER SERVICE tel. 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ

Ver. 20170425

Soldering Iron

Art.no 41-1363 Model KK-015P

41-1364 KK-030P

Please read theentire instruction manual before using theproduct and

then save it for future reference. We reserve theright for any errors in

text or images and any necessary changes made to technical data.

In theevent of technical problems or other queries, please contact

our Customer Services.

Safety

Warning: Thetip of thesoldering iron gets very hot. There is arisk of burns.

WARNING – FIRE HAZARD!

Things to think about before using thesoldering iron:

• Be careful when using it in thevicinity of combustible materials.

• Never use it where ﬂammable or explosive substances are used

or stored.

• Heat can spread and ignite combustible materials which are not

within sight.

• Never leave theproduct unattended when it is connected to

thepower supply.

• Never expose it to rain or moisture.

• Always place it on theincluded stand when it is not in use.

• Make sure that you work on aheat-resistant and ﬁreproof surface.

• Let it cool down naturally in theair after use. Never try to cool it

down in any other way.

• Never immerse it in water or other liquid.

• This appliance is not intended for use by persons (including children)

whose physical, sensory or mental capabilities, or lack

of experience and knowledge, prevents them from using

theappliance safely without supervision or instruction.

• Children shall not play with theappliance.

• If themains lead is damaged in any way it must be replaced by

aqualiﬁed electrician.

3. Turn thesoldering iron

on by setting thepower

switch to the I position.

Thelight in front of

theswitch will come on.

Changing the tip

1. Always unplug thesoldering iron and let it cool before changing

thetip.

Operating instructions

1. Check that thecontact surfaces of thetip are clean and undamaged.

2. Plug themains lead into awall socket. Note: Thesoldering iron

should only be connected to a230 V, 50 Hz electrical outlet.

4. Place thesoldering iron onto theincluded stand and let it

warm up (2–3 min).

5. “Tin” thehot tip of thesoldering iron by coating it with solder.

6. Use thesoldering iron to heat up thesoldering surfaces,

not thesolder.

7. Apply asufﬁcient amount of solder to thejoint and then let

thejoint cool down.

8. Clean thetip of thesoldering iron by wiping it on awet sponge

while it is still hot.

9. Turn thesoldering iron off by setting thepower switch to the 0 position.

Unplug thesoldering iron from thewall socket and let it cool naturally.

Care and maintenance

• Unplug thesoldering iron and let it cool completely before putting

it away for storage.

• If thesoldering iron is not to be used for anextended period, it should

be unplugged and stored in adry location out of reach of children.

2. Release thelocking

collar by turning

thelock nut anti-

clockwise.

3. Remove thelocking collar and extract thetip.

4. Insert anew tip, reﬁt thelocking collar and

tighten thelock nut.

Responsible disposal

This symbol indicates that this product should not

be disposed of with general household waste. This

applies throughout theentire EU. In order to prevent any

harm to theenvironment or health hazards caused by

incorrect waste disposal, theproduct must be handed

in for recycling so that thematerial can be disposed of

in aresponsible manner. When recycling your product,

take it to your local collection facility or contact theplace

of purchase. They will ensure that theproduct is

disposed of in anenvironmentally sound manner.

Specications

41-1363

Rated voltage 230 V, 50 Hz

Power 15W

Mains lead 1.3m

41-1364

Rated voltage 230 V, 50 Hz

Power 30W

Mains lead 1.3m

Produkt Specifikationer

Mærke:	Cocraft
Kategori:	Loddemaskine
Model:	HS 30L

Har du brug for hjælp?

Hvis du har brug for hjælp til Cocraft HS 30L stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Loddemaskine Cocraft Manualer

Cocraft KK-015P Manual

16 August 2024

Cocraft HS 30L Manual

12 August 2024

Cocraft HT-28 Manual

7 August 2024

Loddemaskine Manualer

Nyeste Loddemaskine Manualer

Weller LT 4 Manual

14 November 2025

Rothenberger RoQuick 35957 Manual

12 November 2025

NEO Tools 19-157 Manual

15 Oktober 2025

NEO Tools 19-156 Manual

15 Oktober 2025

Toolcraft ST-150 HF Manual

2 Oktober 2025

Toolcraft LWK-100 Manual

2 Oktober 2025

Toolcraft AT-300 Manual

1 Oktober 2025

Toolcraft ZD-10MB Manual

1 Oktober 2025

NEO Tools 19-158 Manual

30 September 2025

Telwin Force 125 954194 Manual

28 September 2025