Cocraft KK-015P Manual

Cocraft Loddemaskine KK-015P

Læs gratis den danske manual til Cocraft KK-015P (5 sider) i kategorien Loddemaskine. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Cocraft KK-015P, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/5
GREAT BRITAIN • CUSTOMER SERVICE tel. 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
Ver. 20170425
Soldering Iron
Art.no 41-1363 Model KK-015P
41-1364 KK-030P
Please read theentire instruction manual before using theproduct and
then save it for future reference. We reserve theright for any errors in
text or images and any necessary changes made to technical data.
In theevent of technical problems or other queries, please contact
our Customer Services.
Safety
Warning: Thetip of thesoldering iron gets very hot. There is arisk of burns.
WARNING – FIRE HAZARD!
Things to think about before using thesoldering iron:
• Be careful when using it in thevicinity of combustible materials.
• Never use it where flammable or explosive substances are used
or stored.
• Heat can spread and ignite combustible materials which are not
within sight.
• Never leave theproduct unattended when it is connected to
thepower supply.
• Never expose it to rain or moisture.
• Always place it on theincluded stand when it is not in use.
• Make sure that you work on aheat-resistant and fireproof surface.
• Let it cool down naturally in theair after use. Never try to cool it
down in any other way.
• Never immerse it in water or other liquid.
• This appliance is not intended for use by persons (including children)
whose physical, sensory or mental capabilities, or lack
of experience and knowledge, prevents them from using
theappliance safely without supervision or instruction.
• Children shall not play with theappliance.
• If themains lead is damaged in any way it must be replaced by
aqualified electrician.
3. Turn thesoldering iron
on by setting thepower
switch to the I position.
Thelight in front of
theswitch will come on.
Changing the tip
1. Always unplug thesoldering iron and let it cool before changing
thetip.
Operating instructions
1. Check that thecontact surfaces of thetip are clean and undamaged.
2. Plug themains lead into awall socket. Note: Thesoldering iron
should only be connected to a230 V, 50 Hz electrical outlet.
4. Place thesoldering iron onto theincluded stand and let it
warm up (2–3 min).
5. “Tin” thehot tip of thesoldering iron by coating it with solder.
6. Use thesoldering iron to heat up thesoldering surfaces,
not thesolder.
7. Apply asufficient amount of solder to thejoint and then let
thejoint cool down.
8. Clean thetip of thesoldering iron by wiping it on awet sponge
while it is still hot.
9. Turn thesoldering iron off by setting thepower switch to the 0 position.
Unplug thesoldering iron from thewall socket and let it cool naturally.
Care and maintenance
• Unplug thesoldering iron and let it cool completely before putting
it away for storage.
• If thesoldering iron is not to be used for anextended period, it should
be unplugged and stored in adry location out of reach of children.
2. Release thelocking
collar by turning
thelock nut anti-
clockwise.
3. Remove thelocking collar and extract thetip.
4. Insert anew tip, refit thelocking collar and
tighten thelock nut.
Responsible disposal
This symbol indicates that this product should not
be disposed of with general household waste. This
applies throughout theentire EU. In order to prevent any
harm to theenvironment or health hazards caused by
incorrect waste disposal, theproduct must be handed
in for recycling so that thematerial can be disposed of
in aresponsible manner. When recycling your product,
take it to your local collection facility or contact theplace
of purchase. They will ensure that theproduct is
disposed of in anenvironmentally sound manner.
Specications
41-1363
Rated voltage 230 V, 50 Hz
Power 15W
Mains lead 1.3m
41-1364
Rated voltage 230 V, 50 Hz
Power 30W
Mains lead 1.3m

Produkt Specifikationer

Mærke: Cocraft
Kategori: Loddemaskine
Model: KK-015P

Har du brug for hjælp?

Hvis du har brug for hjælp til Cocraft KK-015P stil et spørgsmål nedenfor, og andre brugere vil svare dig


Loddemaskine Cocraft Manualer

Cocraft

Cocraft KK-015P Manual

16 August 2024
Cocraft

Cocraft HS 30L Manual

12 August 2024
Cocraft

Cocraft HT-28 Manual

7 August 2024

Loddemaskine Manualer

Nyeste Loddemaskine Manualer

Graphite

Graphite Energy+ 58GE143 Manual

5 December 2025
Guede

Guede GIS 140 Manual

3 December 2025
Toolcraft

Toolcraft SIG-290 Manual

26 November 2025
Proxxon

Proxxon Microflam MGS Manual

25 November 2025
Rothenberger

Rothenberger Hot Pack 2 Manual

25 November 2025
Weller

Weller LT 4 Manual

14 November 2025
Rothenberger

Rothenberger RoQuick 35957 Manual

12 November 2025
NEO Tools

NEO Tools 19-157 Manual

15 Oktober 2025
NEO Tools

NEO Tools 19-156 Manual

15 Oktober 2025
Toolcraft

Toolcraft ST-150 HF Manual

2 Oktober 2025