Conair WW28 Manual

Conair Vægten WW28

Læs gratis den danske manual til Conair WW28 (2 sider) i kategorien Vægten. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Conair WW28, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Body Analysis:

1. Operate the scale on a secure ﬂat ﬂoor. Tap the scale to turn it on, and wait till

“0.0” appears. Press the “User” button repeatedly until your user number shows on

the display.

2. Stored data for your user number appears (User number, Height, and Age) then

the scale displays “0.0”.

3. Step on the scale barefoot with your feet aligned on the electrodes (metal strips)

on both the sides of platform. Note: you must be barefoot in order for the scale to

read your body analysis measurements.

4. Your current weight will be displayed for a few seconds.

5. Then the display will show “bF %” followed by your body fat percentage.

6. Next, “H2O” shows on the display, followed by your body water percentage.

7. Then, “bone” shows on the display, followed by your bone mass value.

Instructions

for use of

Weight Watchers

bathroom scale

Congratulations! By purchasing this Weight Watchers Scale, you’ve made

the first step toward taking control of your weight. To get the greatest benefit

from your purchase, please read this entire brochure before using your scale.

registered trademark of Weight Watchers International Inc. and used under license.

Service Centers

Conair Corporation

Service Department

150 Milford Road

East Windsor, NJ 08520

Conair Corporation

Service Department

7475 N. Glen Harbor Blvd.

Glendale, AZ 85307

1-800-326-6247

www.conair.com

10AD115510

IB-10186

LIMITED TEN YEAR WARRANTY

Conair will repair or replace, at our option, your appliance free of charge for 120

months from the date of purchase if the appliance is defective in workmanship

or materials.

To obtain service under this warranty, return the defective product to the service

center listed below that is nearest you, together with your sales slip and $5.00 for

postage and handling. California residents need only provide proof of purchase

and should call 1-800-3-CONAIR for shipping instructions. In the absence of a

receipt, the warranty period shall be 120 months from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT

LIMITED TO THE IMPLIED WARRANTY OF MERCHANT ABILI TY AND FITNESS FOR

A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 120-MONTH

DURATION OF THIS WARRANTY. Some states do not allow limitations on how

long an implied warranty lasts, so the above limitations may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY,

EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion

or limitation of special, incidental, or consequential damages, so the above

limitation may not apply to you. This warranty gives you specific legal rights,

and you may also have other rights which vary from state to state.

Scales by

™

Models #WW28

2. Setting the user number

Press the “Set “button. The number “P-01” will appear and blink. Use the Up/Down

button to select a user number (P-01 to P-4). Press SET to conﬁrm.

3. Setting the height

Next, the height indicator “HT” and inch or cm symbol light up (if switch is set to lb,

default is height in inches; if switch is set to KG, default is height in cm). Press the

up or down arrows to adjust the height. Pressing and holding either the up or the

down arrow will advance numbers quickly. Press SET to accept the height. Scale

enters the age setting mode.

4. Setting the age

“AGE” appears and the default age 25 ﬂashes. Press the up or down arrows to ad-

just the age and press SET to conﬁrm. The scale enters the gender setting mode.

5. Setting the gender

A gender icon ﬂashes. Press the up or down arrows to choose between male and

female gender. Press the set key to conﬁrm.

6. Display and store data

• Once the gender is set, data storage is complete.

• User number, height and age each display for a few seconds.

7. The scale will turn off automatically.

8. Finally, "b" shows on the display, followed by your BMI (Body Mass Index)

9. Display scrolls through your body fat, body wate, bone mass and BMI values

again and then scale turns off.

NOTES

If you step on the scale before “0.0” appears, the scale will not function

properly.

Scale will show “Err” if there is improper foot contact in the body analysis

mode, for instance, when you stand on the scale with socks or shoes on.

Hard or dry skin can prevent you making proper contact with electrodes on

the surface of the scale. Try applying a small amount of moisturizer to your

feet before using the scale.

10ad115510_ww28_ib_comp.indd 1-6 6/28/10 2:41:48 PM

Produkt Specifikationer

Mærke:	Conair
Kategori:	Vægten
Model:	WW28
Type:	Elektronisk personlig vægt
Brugervejledning:	Ja
Produktfarve:	Grey, White
Batteriteknologi:	Lithium
Automatisk slukning:	Ingen
Skærm:	LCD
Materiale:	Plastic, Stainless steel
Hukommelsesfunktion:	Ja
Måleenhed:	lb
Maksimal vægtkapacitet:	160 kg
Body Mass Index (BMI) måling:	Ja
Flere brugere:	Ja
Let-læseligt display:	Ja
Vægtadministration:	Ja