THIS BATTERY SHIPS IN STORAGE MODE.
Press the LED button to awaken the battery pack. You may also charge the battery pack full to
awaken. Keep in mind some 3
party chargers will not charge the pack when in storage mode. If
the battery is in storage mode(LCD blank), the battery pack is functional, but no smart data
Thank you for your choice in purchasing a Core SWX battery pack. The battery is designed to improve
and assist you in your mobile powering requirements. This product is at the pinnacle of technological
advancements, offering the features and performance of several different products, making it the most
advanced battery product in the industry.
Please read this manual to help you understand and capitalize on the features of this battery.
● Helix Dual Voltage output(14v/28v)
● On-Board Microprocessor stores: Name, Serial Number, Voltage, Temperature, Current,
Chemistry Type, Charge Cycles, and Date of Manufacturing.
● The Viewfinder Capacity Display communicates with the camera to display your remaining battery
capacity in your camera’s viewfinder. This includes Sony, BMD, ARRI and RED models.
● Four Stage, accurate, LED power gauge.
● Temperature, current, and voltage protection.
● Rubberized casing provides a shock absorbing, non-slip shell to protect the battery pack.
● Incorporated ptap output as well as a 5v USB. The USB can also be used as a firmware update
*contact Core SWX for confirmation of battery charger compatibility if using other chargers.
● CoreSWX Helix batteries were designed to be used with Core SWX chargers. Any other
charger may damage the battery and/or the charger. Please contact us before using
● CoreSWX batteries can be recharged in any charge condition.
● Charge the battery in ambient temperature range of 0
charge in an environment between 10
C. Charging in conditions outside the
aforementioned ranges may inhibit the pack from reaching maximum charge capacity.
2. Discharging the battery:
● Maximum continuous discharge for the is 20A(288W) with a 10second peak discharge
rate of maximum continuous discharge at 28v is 10A.
● The LCD automatically switches between 3 different phases; Normal Runtime(based on
default 30wh draw), Remaining Runtime(based on actual draw, when in use), and
Remaining Charge Time(when connected to a charger).
● Press the side LED button for 1 second to activate the backlight feature.
● During operation, the battery samples the current entering or exiting the battery in 7
second intervals. During the charging process, the charge current fluctuates, causing the
Charge Time readings to vary.
