Cotech EMT446/MD Manual

Cotech Skifte EMT446/MD

Læs gratis den danske manual til Cotech EMT446/MD (5 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Cotech EMT446/MD, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/5
English
UNITED KINGDOM • customer service
tel: 020 8247 9300 customerservice@clasohlson.co.uk www.clasohlson.co.uk 10 – 13 Market Place, Kingston upon Thames, Surrey, KT1 1JZe-mail internet postal
2
1
3
Ver. 20180924
IP44 Plug-In Twilight
Switch with Timer
Art.no 36-1057 Model EMT446/MD
Please read theentire instruction manual before using theproduct and
then save it for future reference. Wereserve theright for any errors in
text or images and any necessary changes made to technicaldata.
Intheevent of technical problems or other queries, please contact our
Customer Services.
Safety
• Always unplug thetwilight switch from thewall socket before
cleaningit.
• Make sure that thetwilight switch is properly plugged into thewall
socket and that theconnected load device/appliance is properly
plugged into thetwilight switch.
• Keep thetwilight switch out of children’sreach.
• Never connect aload device/appliance with ahigher power rating
than 1000 W.
• Never immerse thetwilight switch in water or other liquid.
• Never position thetwilight switch where it may be splashed by water
or other liquid.
• Never try to open thehousing, repair or modify thetwilight switch in
anyway.
• Thetwilight switch is not intended for permanent use, it is intended
for temporary use with Christmas decorations, string lights,etc.
• Thetwilight switch should only be used with one load device/appliance,
do not plug asplitter socket into thetwilight switch and connect
multiple appliances.
• Make sure that theelectrical socket that theproduct is plugged into
is easily accessible in case it and theconnected product need to be
quickly disconnected from themains electricity.
• Do not connect products of this type to each other.
• Do not cover theproduct.
Buttons and functions Note:
• Thetwilight switch has amaximum load rating of 1000 W.
• Think carefully before positioning thetwilight switch so that it is
not within theillumination zone of other light sources such as car
headlights.
1. Set thetwilight switch to one of thesettings described in
thetableabove.
2. Turn off theload device/appliance that you are going to connect to
thetwilight switch.
3. Plug theload device/appliance into socket of thetwilight switch.
4. Plug thetwilight switch into anearthed wall socket.
5. Turn theload device/applianceon.
6. Theload device/appliance will now be switched on/off in
accordance with theselected setting.
Care and maintenance
• Unplug thetwilight switch from thewall socket before wiping it clean
with adrycloth.
• Whenever it is not to be used for anextended period, thetwilight
switch should be unplugged from thewall socket and stored in
adry, dust-free environment, out of children’sreach.
Responsible disposal
1. Light sensor
2. LED indicator, lights when
thetwilight switch is turnedon.
3. Setting selectorknob
Operating instructions
Thevarious settings
OFF Always off
ON Always on
2Hrs Switches on at dusk, switches off automatically after 2 hours
4Hrs Switches on at dusk, switches off automatically after 4 hours
6Hrs Switches on at dusk, switches off automatically after 6 hours
8Hrs Switches on at dusk, switches off automatically after 8 hours
DUSK-
DAWN
Switches on at dusk, switches off at dawn
This symbol indicates that this product should not be
disposed of with general householdwaste. Thisapplies
throughout theentire EU. Inorder to prevent any harm to
theenvironment or health hazards caused by incorrect
waste disposal, theproduct must be handed in for
recycling so that thematerial can be disposed of in
aresponsible manner. Whenrecycling your product, take
it to your local collection facility or contact theplace of
purchase. Theywill ensure that theproduct is disposed
of in anenvironmentally sound manner.
Specifications
Rated voltage 230V, 50 Hz
Maxload 1000W
Light sensor 5–75lux
Temperaturerange −10 to 55 °C
IP rating IP44

Produkt Specifikationer

Mærke: Cotech
Kategori: Skifte
Model: EMT446/MD

Har du brug for hjælp?

Hvis du har brug for hjælp til Cotech EMT446/MD stil et spørgsmål nedenfor, og andre brugere vil svare dig


Skifte Cotech Manualer

Cotech

Cotech TS-MD35 Manual

24 Juli 2024
Cotech

Cotech EF700ET Manual

22 Juli 2024
Cotech

Cotech EMT446/MD Manual

20 Juli 2024
Cotech

Cotech 51050X2 Manual

5 Juni 2023
Cotech

Cotech 51058x2 Manual

28 Maj 2023

Skifte Manualer

Nyeste Skifte Manualer

Lancom

Lancom GS-2412 Manual

4 April 2025
Lancom

Lancom GS-2412P Manual

4 April 2025
Lancom

Lancom GS-2426 Manual

4 April 2025
Hager

Hager ARF970D Manual

3 April 2025
Hager

Hager ARF920D Manual

3 April 2025
Roline

Roline 14.01.3579 Manual

2 April 2025
Fantini Cosmi

Fantini Cosmi B12BN Manual

1 April 2025
Fantini Cosmi

Fantini Cosmi B12DN Manual

1 April 2025
Fantini Cosmi

Fantini Cosmi B12GN Manual

1 April 2025
Fantini Cosmi

Fantini Cosmi B12HN Manual

1 April 2025