Cotech ST12 Manual

Cotech Sav ST12

Læs gratis den danske manual til Cotech ST12 (68 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Cotech ST12, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/68
ENGLISHSVENSK ANORSKSUOMIDEUTSCH
Important!
Read the entire instruction manual carefully
and make sure that you fully understand
it before you use the equipment. Keep the
manual for future reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den innan
du använder utrustningen. Spara manualen
för framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre deg
om at du forstår dem før du tar produktet i bruk.
Ta vare på anvisningene for seinere bruk.
Tärkeää tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin alat
käyttää laitetta. Säilytä ohjeet myöhempää
tarvetta varten.
Wichtiger Hinweis:
Vor Inbetriebnahme die komplette
Bedienungsanleitung durchlesen und
aufbewahren.
Ver. 20130827
Original instructions
Bruksanvisning i original
Original bruksanvisning
Alkuperäinen käyttöohje
Original Bedienungsanleitung
Art.no Model
40-8280 ST12
Table Saw
Bordscirkelsåg
Bordsirkelsag
Pöytäpyörösaha
Tischkreissäge
2
ENGLISH
Table Saw
Art.no 40-8280 Model ST12
Please read theentire instruction manual before use and save it for future reference. Wereserve theright for any
errors in text or images and for making any necessary technical changes to this document. Ifyou should have
any questions concerning technical problems please contact our Customer Services.
Safety
• Make sure that everyone who operates thetable saw has read and understood thesafety instructions.
• The table saw must only be used if it is functioning correctly. Carefully observe all thewarnings and safety
instructions outlined in this manual. Ensurethat there are no disturbances that may affect workplace safety.
• Ensure that all safety devices are in place when thetable saw isused.
• Only use saw blades which conform to EN 847-1.
• Keep all thetable saw’s safety instructions accessible and in readable condition.
• Make sure that thetable saw is standing on asolid foundation.
• Check that none of theelectrical cables are damaged and that they are all properly connected.
• Keep children away from thetable saw when it is connected to thepower supply.
• This product must not be used by anyone (including children) suffering from physical or mental impairment.
Thisproduct should not be used by anyone who has not read theinstruction manual unless they have been
instructed in its use by someone who will take responsibility for their safety.
• Operators of thetable saw must not be distracted.
• If a second person is working next to thetable saw to take care of workpieces, thetable saw must
be equipped with atable extension. Thesecond person must never stand anywhere but at theend of
theextension table.
• Keep theworking area tidy. Cluttered surfaces and benches invite accidents.
• Wear suitable attire. Donot wear loose-fitting clothing or jewellery; they could be caught in moving parts.
Non-slip shoes are recommended for outdoor work. Wearahairnet or similar if you have longhair.
• Always use safetywear. Wearsafety glasses. Useadust mask or dust filter when working in dusty environments.
• Make sure theblade is fitted theright wayround.
• The table saw’s safety devices must not be removed or disabled.
• Disconnect thetable saw from thepower supply before servicing, changing attachments, changing blades
or cleaning thetable saw or measuring any workpiece placed onit.
• Disconnect thetable saw from thepower supply before correcting any potential hazards.
• Dust extraction equipment must be used when creating large amounts ofdust.
• Never use blades which are defective, blunt or of theincorrect size.
• High speed steel blades must not beused.
• The riving knife is animportant safety device which steers theworkpiece and prevents theblade for binding
in thecut and theworkpiece from kicking back.
• The blade guard must always be in place when making acut.
• The blade guard must be horizontal over thesawblade.
• Always use apush stick when rip-cutting narrow stock i.e. thinner than 120 mm. Thepush stick prevents
hands from coming too close to thesawblade.
• Replace thetable insert if it is damaged in anyway.
• Switch off themotor and disconnect thetable saw from thepower supply before leaving theworkplace.
• Disconnect thetable saw from thepower supply before moving it. Makesure that thetable saw is
connected correctly before switching iton.
• Servicing and repair work must only be carried out at anauthorized service centre.
• All safety devices and guards must be replaced immediately following any repairs or servicing.
• Never let children play with theproduct.
• Never use thetable saw if you are tired or under theinfluence of drugs, alcohol or medication.

Produkt Specifikationer

Mærke: Cotech
Kategori: Sav
Model: ST12

Har du brug for hjælp?

Hvis du har brug for hjælp til Cotech ST12 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Sav Cotech Manualer

Cotech

Cotech M1Y-140-900A Manual

29 Marts 2024
Cotech

Cotech M1Q-65D Manual

9 Februar 2024
Cotech

Cotech LS400 Manual

17 Januar 2024
Cotech

Cotech JD2902LK Manual

16 December 2023
Cotech

Cotech ST12 Manual

21 April 2023
Cotech

Cotech PS002-S Manual

27 Marts 2023
Cotech

Cotech CS 18 Manual

4 December 2022
Cotech

Cotech PN3800II Manual

19 November 2022
Cotech

Cotech JS 18 Manual

10 November 2022
Cotech

Cotech YT4646 Manual

25 Oktober 2022

Sav Manualer

Nyeste Sav Manualer

Dremel

Dremel CS12V Manual

13 Juni 2025
Metabo

Metabo BAS 505 Precision WNB Manual

9 Juni 2025
Mega

Mega 64000 Manual

9 Juni 2025
Metabo

Metabo ST 18 LT 130 Manual

8 Juni 2025
Metabo

Metabo STB 18 LT 130 Manual

8 Juni 2025
Metabo

Metabo BAS 505 Precision DNB Manual

7 Juni 2025
Draper

Draper 70833 Manual

7 Juni 2025
Draper

Draper 83677 Manual

6 Juni 2025
Draper

Draper Storm Force 98445 Manual

6 Juni 2025
Draper

Draper Expert 57489 Manual

6 Juni 2025