Crestron AMP-X75 Manual

Crestron Modtager AMP-X75

Læs gratis den danske manual til Crestron AMP-X75 (16 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Crestron AMP-X75, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

The Crestron® AMP-X75 is a high performance, space saving, energy

efficient amplifier that’s totally configurable, yet simple to use. Whether

installed in a rack, mounted on a wall, or placed on a table, the AMP-X75

is simple to specify and install in any configuration.



In the Box

1 AMP-X75, X-Series Amplifier, 75 W

 



Additional Items

4 Screw, 8-32 x 5/16 in., Flat Head, Phillips, Black (2055195)

4 Screw, 6-32 x 3/8 in., Undercut Head, Phillips (2055196)

2 Plate, Joining (2055198)

4 Foot, Adhesive, Black (2055200)

1 Fascia Plate with Tape, Quarter-Width (2058154)

1 Rack Ear, 1U, Quarter-Width (2058155)

1 Fascia Plate with Tape, Half-Width (2058156)

1 Rack Ear, 1U, Half-Width (2058157 )

1 Power cord (2055205)

1 Connector, Speaker (2055206)

2 Connector, Input (2055207)

1 Connector, 2-Pin (2003574)



Assemble

Prepare for Installation

The amplifier can be installed in a rack, mounted on a wall, or placed on

a table.

Rack Installation

Before an amplifier can be installed in a rack, rack ears must be

attached.

Single Amplifier

1. Remove the protective plastic from the adhesive strip on the rear

side of the fascia plates.

2. Press the fascia plates against the rack ears to attach them.

AMP-X75

QuickStart

X-Series Amplifier,75 W

3. Attach the rack ears to the amplifier with the four included

6-32 x 3/8 in. screws.

Ganged Amplifiers

Up to four amplifiers can be ganged together while occupying only 1 RU

of rack space. When ganged together, the amplifier assembly occupies

the entire width of the rack. When ganging together two or three

amplifiers, a combination of quarter-width and half-width rack ears and

fascia plates must be used.

1. Place the amplifiers upside-down and adjacent to each other on a

flat surface.

2. Use a Phillips screwdriver (not included) to gang the amplifiers

together with three joining plates (two are included with each

amplifier) and twelve 8-32 x 5/16 in. screws (four are included with

each amplifier).

AMP-X75

QuickStart

X-Series Amplifier,75 W

Produkt Specifikationer

Mærke:	Crestron
Kategori:	Modtager
Model:	AMP-X75

Har du brug for hjælp?

Hvis du har brug for hjælp til Crestron AMP-X75 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Modtager Crestron Manualer

Crestron DM-RMC-100-S Manual

24 September 2025

Crestron DM-RMC-200-C Manual

24 September 2025

Crestron AMP-X750 Manual

24 September 2025

Crestron AMP-X1000 Manual

23 September 2025

Crestron AMP-X75 Manual

23 September 2025

Crestron AMP-4600 Manual

23 September 2025

Crestron AMP-8075 Manual

23 September 2025

Crestron AMP-X300 Manual

23 September 2025

Crestron AMP-X500 Manual

23 September 2025

Crestron AMPI-8150 Manual

23 September 2025

Modtager Manualer

Nyeste Modtager Manualer

Neets 312-0003 Manual

27 September 2025

TV Star T7200 CX Manual

27 September 2025

Ampetronic D14-2 Manual

24 September 2025

Audiolab D9 Manual

24 September 2025

Ground Zero GZIA 2.240 Manual

24 September 2025

Ampetronic C7-1 Manual

23 September 2025

Ground Zero GZIA 2.135 Manual

23 September 2025

Ground Zero GZTA 4125X-B Manual

23 September 2025

Ground Zero GZIA 1.2000D Manual

23 September 2025

Ground Zero GZUA 4SQ Manual

23 September 2025