Crestron SW-FUSION-EM Manual

Crestron Ikke kategoriseret SW-FUSION-EM

Læs gratis den danske manual til Crestron SW-FUSION-EM (10 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Crestron SW-FUSION-EM, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/10

csi_26_09_13_electrical_power_monitoring.doc - 1 26 09 13

SECTION 26 09 13

ELECTRICAL POWER MONITORING

Specifier: The Specifier/Design Professional is responsible for the accuracy of all project specifications,

including system application and coordination with related sections. This guide specification is provided

as a convenience and requires editing to match actual project requirements. CRESTRON ELECTRONICS,

INC. SHALL NOT BE LIABLE FOR ANY DAMAGES ARISING OUT OF THE USE OF ANY OF ITS GUIDE

SPECIFICATIONS. For Crestron design assistance and design review please contact Sales Support Ser-

vices Department at 800.237.2041 or techsales@crestron.com.

PART 1 GENERAL

1.1 SUMMARY

A. Section Includes:

P ower meter unit integrated with the following:

Specifier: Edit paragraph to correspond to components and features required for this Project.

1. Automation and control server.

2. Electrical breaker panel.

3. Network power switching controls.

4. Network lighting controls.

5. Network management and control systems.

B. Related Requirements:

Specifier: Related Information paragraph is optional. If retaining, edit and coordinate list of sections

below to correspond to Project requirements.

1. Division 25 Section "Integrated Automation Software for Control and Monitoring

Networks" for software and integration hardware for network automation and

monitoring controls.

2. Division 25 Section "Integrated Automation Controls" for software and integration

hardware for network lighting controls.

3. Division 25 Section "Integrated Automation Network Equipment".

4. Division 26 Section "Common Work Results For Electrical".

5. D ivision 26 Section “Programmable Controllers”.

6. Division 26 Section “Digital Network Lighting Controls”-

7. Division 26 Section "Wiring Devices".

1.2 REFERENCES

A. California Energy Commission (CEC):

1. CEC CCR Title 24, Part 6: California Energy Efficiency Standards for Residential

and Nonresidential Buildings, California's Appliance Efficiency Program: Listed

lighting control devices.

csi_26_09_13_electrical_power_monitoring.doc - 2 26 09 13

B. National Fire Protection Association (NFPA):

1. NFPA 70 National Electrical Code.-

C. Underwriters Laboratories (UL):

1. UL 916 – Energy Management Equipment.

D. National Electrical Code (NEC):

1. NEC Article 410.134 Direct Current Equipment.–

E. ABBREVIATIONS:

1. BAS: Building Automation System.

2. AV: Audio Visual.

3. RF: Radio Frequency.

4. CT: Current Transformer.

1.3 SYSTEM DESCRIPTION

Specifier: Edit description below to correspond to Project requirements.

A. Power metering system integrated with lighting, building automation, and Audio- Visual

systems utilizing a single control protocol and network infrastructure.

1. ower meter P system with central master control processor integrates the following

controls:

a. Native communication with building wide Audio Visual systems control

network.

b. Emergency Lighting Control when used with UL 924 devices.

c. Multiple Lighting Control Systems.

d. Touch panel controls.

e. Window treatment controls.

f. Timed room lighting.

g. HVAC controls.

h. Centralized facility management server:

1) Web- - -accessible, network connected, Windows based lighting

management software running on a Microsoft Exchange Server

communicating over TCP/IP networks to provide lighting and window

shade control, daylight harvesting, load shedding, occupancy sensing,

and occupied/unoccupied lighting schedules.

2) Store, evaluate and report power usage data.

i. Building Management Systems Interface – Direct communications through

master controller with BACnet, Modbus, LonWorks and Metasys

management protocols.

B. Unified System Integration – Controller supports native communication protocol utilized

by the lighting and AV control systems.

Produkt Specifikationer

Mærke:	Crestron
Kategori:	Ikke kategoriseret
Model:	SW-FUSION-EM

Har du brug for hjælp?

Hvis du har brug for hjælp til Crestron SW-FUSION-EM stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Crestron Manualer

Crestron FT2A-CP-RJ45 Manual

9 Juni 2025

Crestron DIN-PWS60 Manual

9 Juni 2025

Crestron TS-770R Manual

9 Juni 2025

Crestron HD-CONV-USB-200 Manual

9 Juni 2025

Crestron CLT-1FAN4 Manual

8 Juni 2025

Crestron CLTIBN-2DIM8 Manual

8 Juni 2025

Crestron CLT-2DIMFLV8 Manual

8 Juni 2025

Crestron CAEN-CK-2X1 Manual

8 Juni 2025

Crestron FT2A-PWR-IS-2 Manual

8 Juni 2025

Crestron FT2A-CBLR-1T Manual

8 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Rival CN753-W Manual

15 Juni 2025

Acopa 553WSMKE Manual

15 Juni 2025

Atosa RDCS-35 Manual

15 Juni 2025

Gourmia GAF692 Manual

15 Juni 2025

Taylor 5315856 Manual

15 Juni 2025

Watts LF8B Manual

15 Juni 2025

Watts PLT-5 Manual

15 Juni 2025

ToiToiKids Fay Manual

15 Juni 2025

Astell&Kern PD10 Manual

15 Juni 2025

Aiphone JP-8Z Manual

15 Juni 2025