CRUX VIMMB-85N Manual

CRUX Ikke kategoriseret VIMMB-85N

Læs gratis den danske manual til CRUX VIMMB-85N (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 5 anmeldelser. Har du et spørgsmål om CRUX VIMMB-85N, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

MERCEDES BENZ

2016 – 2018 A Class (W176)

2015 2018 B Class (W246) –

2015 – 2018 C Class (W205 / W202)

2015 – 2018 CLA Class (C117)

2015 – 2018 E Class (W212)

2018 E Class (W213) w/ Comand Online NTG5.5

2016 – 2018 E Class Coupe (C207)

2016 – 2018 GLA Class (X156)

2016 – 2018 GLC Class (X253)

2016 – 2018 GLS Class (X166)

2014 – 2018 S Class (W222)

2014 – 2018 Class (W447) C

- Retains functionality of Factory-installed Navigation System for passenger access at anytime.

- Allows onscreen access to Factory Bluetooth Keypad*.

- Allows for Navigation Destination Address Entry at anytime*.

- Plug & Play Installation.

*Subject to capability of Factory-installed Navigation System.

- Compatible with Comand Online NTG5, NTG5.1 and NTG5.5 systems.

- Interface does not have a video input

VIMMB- MODULE 85N

MB-85N HARNESS

1 / 2

Rev.120618

INSTALLING THE INTERFACE:

1. The installation is made behind the headunit (not the display).

2. Remove the headunit to gain access to the Quadlock connector.

3. Remove the factory connector from the headunit.

4. Make the T-Harness connections behind the factory headunit .

5. Set the DIP Switches. See settings below.

6. Connect the Green wire for a non permanent VIM option. The White wire can be used to power

an accessory such as a DVD player. Test the system before re-installing the factory headunit.

DIP SWITCH SETTINGS:

1. To enable the non-permanent deo- -motion feature, set DIP switch 1 . Use a toggle vi in to “ON”

switch (not included) and connect the Green wire to +12V constant to enable VIM.

2. Switches 5 and 6 are defaulted to “ON”, test the video -motion feature before placing the radio in

back into the dash. If there is no display on the screen please set switches “5” and “6” to “OFF”.

1. On = VIM Enabled

2. Not Used

3. Not Used

4. Not Used

5. On

6. On

COMPATIBLE RADIOS:

NTG5 System

NTG5.1 System

NTG5.5 System

2 / 2

Rev.120618

Produkt Specifikationer

Mærke:	CRUX
Kategori:	Ikke kategoriseret
Model:	VIMMB-85N

Har du brug for hjælp?

Hvis du har brug for hjælp til CRUX VIMMB-85N stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret CRUX Manualer

CRUX DKGM-51 Manual

23 August 2025

CRUX RVCFD-79F Manual

23 August 2025

CRUX ACP-TSL Manual

23 August 2025

CRUX RVCCH-75WT Manual

22 August 2025

CRUX VIMMB-85N Manual

10 Juli 2025

CRUX VIMPR-90P Manual

10 Juli 2025

CRUX VIMCF-93C Manual

10 Marts 2025

CRUX VIMFD-95F Manual

10 Marts 2025

CRUX VIMCF-93 Manual

10 Marts 2025

CRUX VIMAD-84 Manual

10 Marts 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Extron IN1608 IPCP SA Manual

27 August 2025

Dynatrap DT2000XL Manual

27 August 2025

Extron IN1604 DTP Manual

27 August 2025

Extron DVS 605 A Manual

27 August 2025

Amplicomms TCL 250 Manual

27 August 2025

Moulinex Morning FG2M13 Manual

27 August 2025

Olivetti d-Copia 4524MF Manual

27 August 2025

ENTES SR-05E Manual

27 August 2025

ENTES EMR-53S Manual

27 August 2025

ENTES SR-10E Manual

27 August 2025