CyberPower P1004UC15 Manual

CyberPower Vægudtag P1004UC15

Læs gratis den danske manual til CyberPower P1004UC15 (1 sider) i kategorien Vægudtag. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om CyberPower P1004UC15, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK:

Use only in dry locations and only indoors.

DO NOT plug into another relocatable power tap.

DO NOT “daisy chain” surge protectors.

DO NOT use with any aquarium equipment.

DO NOT use if properly grounded outlets are not available.

DO NOT install this device if there is less than 10 meters (30 feet) of wire between

the electrical outlet and electrical service panel.

DO NOT use for medical or life support equipment. This device features an internal

protection that will disconnect the surge protective component at the end of its

useful life, but it will maintain unprotected power to the load.

FOR MORE INFORMATION

Visit CyberPowerSystems.com for more information regarding:

• Product information and certiﬁcations

• Product warranty

• Connected equipment guarantee

TECHNICAL SUPPORT

Visit: CyberPowerSystems.com/support

Toll-Free: 1-877-297-6937

CyberPower and the CyberPower logo are trademarks of Cyber Power Systems,

Inc., and/or aliates, which are registered in many countries and regions. All other

trademarks are the property of their respective owners.

FEATURES

1. ON/OFF Reset Control Switch and Circuit Breaker

Controls power to all outlets. The switch is also a 15A

breaker. When an overload occurs, it will automatically

switch o. To resume operation, ensure the overload

condition is removed and reset the surge protector by

switching the unit ON.

2. Protected LED Indicator

Illuminated when the surge protection feature is

working properly.

3. Grounded LED Indicator

Illuminated when the surge protector is

properly grounded.

4. Standard Grounded Outlets (10)

5. USB-A Charging Port (1)

6. USB-C Charging Port (1)

7. Power Cord

TROUBLESHOOTING

If the ON/OFF Reset Control switches to the OFF position, the 15-amp circuit

breaker may have been tripped. Examine your connected equipment and remove

the device overloading the circuit, causing the trip. Then, turn the ON/OFF Reset

Control back to RESET.

If the GROUNDED indicator does not light when you plug in the surge protector,

move the surge protector to a di˜erent grounded three-prong AC outlet. If the

GROUNDED indicator still does not light and the surge protector appears to be

working correctly, your outlets may not be properly grounded and should be

repaired by a professional electrician.

If the PROTECTED indicator does not light, the surge protector’s outlets are no

longer protected from power surges or spikes. The surge protector may have

received a power surge or spike beyond its speciﬁed limits that have overloaded

the protection circuitry and rendered it inactive. The surge protector has protected

your connected equipment as designed, but it will not protect against future

surges and spikes. It should be replaced.

10-OUTLET

SURGE PROTECTOR

WITH 2 USB PORTS

P1004UC15

YOUR ULTIMATE ALLY IN POWER

Cyber Power Systems (USA), Inc.

4241 12th Avenue East, Suite 400 | Shakopee, MN 55379

CyberPowerSystems.com

SPECIFICATIONS

Model Number: P1004UC15

Outlets: Standard Grounded Outlets (10)

Power Cord Length: 4 ft

Surge Protection: 2400 Joules

USB-A Charging Port (1): 5V/2.4A

USB-C Charging Port (1): 5V/3A

USB Total Output: 18W

Electrical Rating: 125V/15A/1875W

UL Clamping Voltage: UL1449 4th/800V(L-N, L-G, N-G)

Maximum Peak Current: 60,000 A

3 AC Lines Protected: L-N: 30,000 A; L-G: 15,000 A;

N-G: 15,000 A

Response Time: Less than 1 nanosecond

Circuit Breaker: Resettable 15 Amp

i WARNING: This product can expose you to chemicals including bisphenol A (BPA)

and styrene (ABS), which is known to the State of California to cause reproductive

harm and cancer. For more information, go to www.P65Warnings.ca.gov..

CONFORMANCE APPROVALS

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may

cause undesired operation.

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interfer-

ence to radio or television reception, which can be determined by

turning the equipment o and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modiﬁcations not expressly approved by the

party responsible for compliance could void the user’s authority to

operate the equipment.

K01-E000117-00

Produkt Specifikationer

Mærke:	CyberPower
Kategori:	Vægudtag
Model:	P1004UC15

Har du brug for hjælp?

Hvis du har brug for hjælp til CyberPower P1004UC15 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vægudtag CyberPower Manualer

CyberPower B604BK Manual

2 Oktober 2025

CyberPower P1004UC15 Manual

2 Oktober 2025

CyberPower P806UC15 Manual

1 Oktober 2025

CyberPower P1208UC15BK Manual

1 Oktober 2025

CyberPower P403UC15 Manual

1 Oktober 2025

CyberPower SB0602BA-DE-B30 Manual

19 August 2025

CyberPower DS304UCMT Manual

29 Juli 2025

CyberPower DS304UCBL Manual

29 Juli 2025

CyberPower P0420SUD0-FR Manual

6 September 2024

CyberPower B0520SC0-FR Manual

6 September 2024

Vægudtag Manualer

Nyeste Vægudtag Manualer

Homematic IP HmIP-PSM-2 Manual

30 September 2025

Insignia NS-HW1A1C22 Manual

30 September 2025

Insignia NS-PWRD3C6 Manual

30 September 2025

Insignia NS-HW36A2P Manual

30 September 2025

Homematic IP HMIP-DS55 Manual

29 September 2025

Insignia NS-MP570W6IN1W24 Manual

29 September 2025

Draper 30624 Manual

24 September 2025

Anslut 006865 Manual

23 September 2025

Berker 20296089 Manual

18 September 2025

Berker 20298989 Manual

17 September 2025