D-Link DBT-900AP Manual

D-Link Adgangspunkt DBT-900AP

Læs gratis den danske manual til D-Link DBT-900AP (53 sider) i kategorien Adgangspunkt. Denne vejledning er vurderet som hjælpsom af 53 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 27 anmeldelser. Har du et spørgsmål om D-Link DBT-900AP, eller vil du spørge andre brugere om produktet?

Side 1/53
Check Your Package Contents
These are the items included with your DBT-900AP purchase:
If any of the above items are missing, please contact your reseller.
• D
BT
-
900AP
Bluetooth
-
to
-
LAN Access Point
• Power Adapter
• RJ-45 LAN Cable
DBT-900AP
D-Link PersonalAir
Bluetooth-to-
LAN Access Point
©2003 D-Link Corp. A
ll rights reserved. Trademarks or registered trademarks are the property of their
respective holders. Software and specications subject to change without notice. DBT-900AP 09052003
2
Connect the DBT-900AP Bluetooth
Access Point to Your Network
Straight up the antenna of the DBT-900AP
You may need to adjust the direction of the antenna to get better signal strength.
Attach the External Power Supply for DBT-900AP
Attach the external power supply to the DC power input connector located on the rear
panel of DBT-900AP and connect it to your local power supply. The will Power LED
turn to indicate proper operation. ON
Connecting DBT-900AP to Your Network
Insert one end of the cable to the on the back panel of the DBT-900AP Ethernet port
and the other end of the cable to an (i.e., D-Link DI-Ethernet Broadband Router
604) or (i.e., D-Link DES-1005D) that supports DHCP Client function. The Switch
LAN LED light will illuminate to indicate a proper Ethernet connection.
Note: The Ethernet Port on DBT-900AP is Auto-MDI/MDIX. Meaning you can use a
straight-through or crossover-Ethernet cable to connect to the Ethernet port on the
DBT-900AP.
Connect Bluetooth-enabled
computers to DBT-900AP
Note:
This Access Point supports the state-of-the-art PAN prole. Please make sure if your
Bluetooth Software installed in your computers or PDAs support this prole before
this step.
This Access Point does not need to install any specic driver; it requires the Bluetooth
adapter (for example: D-Link DBT-120 USB Bluetooth Adapter) to be installed on the
PC or laptop computer in order to access to the DBT-900AP wirelessly.
The step-by-step instructions that follow are shown with Widcomm Bluetooth Software
(version 1.4 or above) that included with D-Link DBT-120 USB Bluetooth Adapter
under Windows 98SE/ME/2000.
Right-click to the “B” logo on the system tray and choose “Explorer” or double click
“My Bluetooth Places” to open Bluetooth Adapter.


Produkt Specifikationer

Mærke: D-Link
Kategori: Adgangspunkt
Model: DBT-900AP

Har du brug for hjælp?

Hvis du har brug for hjælp til D-Link DBT-900AP stil et spørgsmål nedenfor, og andre brugere vil svare dig




Adgangspunkt D-Link Manualer

Adgangspunkt Manualer

Nyeste Adgangspunkt Manualer