D-Link DIS-100E-8W Manual


Læs nedenfor 📖 manual på dansk for D-Link DIS-100E-8W (8 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 31 personer og blev bedømt med 4.6 stjerner i gennemsnit af 16 brugere

Side 1/8
1
DIS-100E Series Unmanaged
Industrial Fast Ethernet Switch
Quick Installation Guide
O verview
The -DIS 100E Series nmanaged Industrial U Fast Ethernet
Switch solutions are designed for supporting standard
industrial applications without complex setup, allowing for
a - - truly plug and play network.
If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment
may be impaired.
Package Checklist
Please verify that the box contains the following items:
Item Quantity
Unmanaged switch 1
Wall-mount plates 2
DIN r 1 ail clip
M4 Screws
(for the wall mount plates &
DIN clip)
4
DC power terminal block 1
RJ-45/SFP protective cap 2-4
Quick Installation Guide 1
Safety I nstructions
When a connector is removed during installation, testing,
or servicing, or when an energized fiber is broken, a risk of
ocular exposure to optical energy that may be potentially
hazardous occurs, depending on the laser output power.
The primary hazards of exposure to laser radiation from an
optical-fiber communication system are:
Damage to the eye by accidental exposure to a beam
emitted by a laser source.
Damage to the eye from viewing a connector attached
to a broken fiber or an energized fiber.
Documentation Conventions
The following conventions are used in this quick installation
guide to emphasize information that will be of interest to
the reader.
D ANGER The described activity or situation might or
will cause personal injury.
WARNING — The described activity or situation might
or will cause equipment damage.
C AUTION The described activity or situation might or
will cause service interruption.
N OTE The information supplements the text or
highlights important points.
Di mension Illustration (unit: mm)
5- Port Model
8- Port Model
2
DIN Rail- M ounting
1. Attach the DIN rail kit onto the switch using the bracket
and screws in the accessory kit.
2. Hook the unit over the DIN rail.
3. Push the bottom of the unit towards the DIN rail until it
snaps into place.
Wall M ounting (unit: mm)
1. the Attach wall mounting kit onto the switch using the
mounting plate and s M4 screws in the accessory kit.
5- Port Model
8- l Port Mode
Connecting to Ground
The switch must be properly grounded for optimum system
performance.
5- 8- Port Model Port Model
Connecting to Ethernet Interfaces
(RJ- 45)
Connecting the Ethernet interface via RJ- 45:
To connect to a PC, use a straight through or a -
cross-over Ethernet cable,
To connect the switch to an Ethernet device, use UTP
(Unshielded Twisted Pair) or STP (Shielded Twisted
Pair) Ethernet cables.
The pin assignment of the RJ-45 connector is shown in the
following figure and table.
Pin Assignment
1,2 - T/Rx+,T/Rx
3,6 R/T R/Tx- x+,
2
3
Ver. 1.0 )0(WW 2018/ / - 06 06 GP801010X 000


Produkt Specifikationer

Mærke: D-Link
Kategori: Ikke kategoriseret
Model: DIS-100E-8W
Kode for international beskyttelse (IP): IP30
Bredde: 39 mm
Dybde: 96.9 mm
Højde: 117.8 mm
Vægt: 405 g
Produktfarve: Sort
Pakkevægt: 570 g
Pakkedybde: 178 mm
Pakkebredde: 140 mm
Pakkehøjde: 83 mm
Opbevaringstemperatur (T-T): -40 - 85 °C
Relativ luftfugtighed ved drift (H-H): 5 - 95 %
Strømforbrug (typisk): 1.41 W
Driftstemperatur (T-T): -40 - 75 °C
Certificering: UL 60950‑1 \nCE\nFCC
Strømforbrug (maks.): 1.64 W
Pallens bruttobredde: 1100 mm
Pallens bruttolængde: 1200 mm
Netværksstandarder: IEEE 802.3x
Kan monteres på væggen: Ja
Harmoniseret systemkode (HS): 85176990
DC indgangsspænding: 12 - 58 V
Plug and play: Ja
Forsendelseskassens bruttovægt (indvendig): 6650 g
Fuld duplex: Ja
Strøm over Ethernet (PoE): Ingen
Produkter pr. forsendelseskasse (indvendig): 10 stk
Forsendelseskasses kassens bredde (indvendig): 305 mm
Forsendelseskassens længde (indvendig): 430 mm
Forsendelseskassens højde (indvendig): 200 mm
Gennemsnitstid mellem fejl (MTBF): 219000 t
Forsendelsesemballage nettovægt: 6640 g
Switch-type: Ikke administreret
Switch lag: L2
10G understøttelse: Ingen
Auto MDI/MDI-X: Ja
Flowkontrol support: Ja
Kobber ethernet kabelteknologi: 10BASE-T, 100BASE-TX, 100BASE-T
Broadcast stormkontrol: Ja
Basis omskiftning RJ-45 Ethernet porte, antal: 8
Basis omskiftning RJ-45 Ethernet porttype: Fast Ethernet (10/100)
Opbevar-og-frem: Ja
MAC adresselabel: 1000 entries
Switch kapacitet: - Gbit/sek.
Stativ-montering: Ja
Stabelbar: Ja
DIN-skinne montering: Ja
Auto-forhandling: Ja
Palle bruttovægt (luft): 257400 g
Antal papkasser pr. palle (luft): 36 stk
Antal pr. palle (luft): 360 stk
Pallehøjde (luft): 1350 mm
Palle bruttovægt (hav): 377100 g
Antal papkasser pr. palle (hav): 54 stk
Antal pr. palle (hav): 540 stk
Pallehøjde (hav): 1950 mm
Relæ udgange: 1

Har du brug for hjælp?

Hvis du har brug for hjælp til D-Link DIS-100E-8W stil et spørgsmål nedenfor, og andre brugere vil svare dig