D-Link DPS-900 Manual

D-Link Ikke kategoriseret DPS-900

Læs gratis den danske manual til D-Link DPS-900 (20 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 12 anmeldelser. Har du et spørgsmål om D-Link DPS-900, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/20
Introduction
A redundant power supply provides a low-cost, simple
solution to the equally simple yet vexing problem of internal
power supply failure, which can result in the shutdown of a
single switching device or an entire network.
With a redundant power supply connected, an integrated
detection circuit continuously monitors the switch’s internal
power supply. In the event of a power interruption, the
switch and connected devices can continue providing
service.
This results in a more reliable network infrastructure and
protects the network from a single failure of a network
device power supply.
Description
The DPS-200, DPS-300, DPS-500, DPS-500DC, DPS-600
and DPS-700 are redundant power supply units designed to
conform to the wattage requirements of the switches being
supported. DPS-200 operates at 60 watts; DPS-300
operates at 90 watts, DPS-500/500DC at 140 watts, DPS-
600 at 500watts, and the DPS-700 at 589 watts.
The DPS-200, DPS-300, DPS-500, DPS-500DC, and DPS-
600 can connect to the master switch using a 14-pin DC
power cable. Similarly, the DPS-700 uses a 22-pin DC
power cable. A standard, three-pronged AC power cable
connects the redundant power supply to the main power
source.
Single RPS (DPS-200/DPS-300
/DPS-500/DPS-500DC)
Single RPS (DPS-
600/700)
14-pin DC power cable
22-pin DC power cable
Installation of the RPS
The single RPS DPS-200, 300, 500, and 500DC can be
installed to the standard rack via the RPS rack DPS-800
and DPS-900. DPS-900 is a standard-size rack mount (5U
in height) designed to hold up to 8 redundant power
supplies. The DPS-800 is also a standard-size rack mount
(1.25U in height) designed to hold up to 2 redundant power
supplies. Installed RPS units can be DPS-200s, DPS-300s,
DPS-500s, DPS-500DCs, or a combination of the above.
NOTE: The DPS-500DC can only be
inserted into a DPS-800
Installing a DPS-
600/700 in a standard
electronics rack
Inserting a single
RPS into a DPS-800
RPS rack
Installing a DPS-800 in a
standard electronics rack
Inserting a single
RPS into a DPS-900
RPS rack
Installing a DPS-900 in a
standard electronics
rack

Produkt Specifikationer

Mærke: D-Link
Kategori: Ikke kategoriseret
Model: DPS-900
Bredde: 440 mm
Dybde: 200.7 mm
Højde: 222.6 mm
Vægt: 4580 g
Produktfarve: Sort
Antal porte: 8

Har du brug for hjælp?

Hvis du har brug for hjælp til D-Link DPS-900 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret D-Link Manualer

D-Link

D-Link DGS-1530 Manual

26 August 2025
D-Link

D-Link DES-1100 Manual

26 August 2025
D-Link

D-Link DPS-500A Manual

25 August 2025
D-Link

D-Link DP-692 Manual

21 August 2025
D-Link

D-Link DI-300 Manual

20 August 2025
D-Link

D-Link DP-802 Manual

19 August 2025
D-Link

D-Link DSL-300G+ Manual

19 August 2025
D-Link

D-Link DGS-3224TG Manual

19 August 2025
D-Link

D-Link DSL-100D Manual

19 August 2025
D-Link

D-Link DGS-3208F Manual

19 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Leviton

Leviton 41089-2WP Manual

29 August 2025
Brecknell

Brecknell SBI-110 Manual

29 August 2025
Belkin

Belkin INC006 Manual

29 August 2025
GYS

GYS flash 125.12 CNT FV Manual

29 August 2025
Extron

Extron DSC DP-HD A Manual

29 August 2025
TFA

TFA 18.6012.30 Manual

29 August 2025
Caretero

Caretero Quadra Manual

29 August 2025
Sony

Sony HZC-PSF14 Manual

29 August 2025
Topeak

Topeak FlashStand Slim X Manual

29 August 2025
Einhell

Einhell BT-AS 2000 Manual

29 August 2025