D-Link DSS-100E-18P Manual

D-Link bryter DSS-100E-18P

Læs gratis den danske manual til D-Link DSS-100E-18P (10 sider) i kategorien bryter. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 3 anmeldelser. Har du et spørgsmål om D-Link DSS-100E-18P, eller vil du spørge andre brugere om produktet?

Side 1/10
Documentation is also available
on the D-Link website
This document will guide you through the basic
installation process for your new D-Link
18-Port Unmanaged PoE Switch
DSS-100E-18P
Quick Installation Guide
КРАТКОЕ РУКОВОДСТВО ПО УСТАНОВКЕ
2
# LED Status Description
4
Link/Act/
Speed
(Ports 17
to 18)
Solid
green
There is an active link negotiated at
10/100/1000 Mbps on this port.
Blinking
green
There is trac on the port at 10/100/1000
Mbps.
O No link
5
PoE
(Ports 1
to 16)
Solid
amber
The port is providing power to the
connected PoE-powered device.
O
There is no PoE-powered device
connected to this port or PoE-powered
device insert but failure occurs. (PSE can’t
provide power to PD due to PD error or
power budget is not enough.)
Table 1
Front Panel Connectors
Figure 2
# DescriptionItem
1Ports 1 ~16
10/100 Mbps PoE-capable ports for
connecting Ethernet devices and PoE-
powered devices.
2Port 17
10/100/1000 Mbps Ethernet uplink port
for connecting to another switch using an
Ethernet cable.
3Port 18
10/100/1000 Mbps GbE/SFP combo uplink
port for connecting to another switch using an
Ethernet cable or installing a compatible SFP
transceiver.
Table 2
Rear Panel Connectors
Figure 3
# DescriptionItem
1 This is used to connect the switch to ground.Switch GND
2Power Input
This is used to connect the power cable to the
switch.
Table 3
Before You Begin
This Quick Installation Guide gives you step-by-step
instructions for setting up your DSS-100E-18P 18-
Port Unmanaged PoE Switch. The model you have
purchased may appear slightly dierent from the
one shown in the illustrations. For more detailed
information about the switch, please refer to the
User Manual.
Package Contents
This DSS-100E-18P package should include the
following items:
1 x DSS-100E-18P
1 x Power cord
1 x Rack mount kit and rubber feet
1 x Quick Installation Guide
If any of the above items are damaged or missing,
please contact your local D-Link reseller.
Hardware Overview
LED Indicators
Figure 1
# LED Status Description
1Power
Solid
green
The device is powered on.
O The device is powered o.
2PoE Max
Solid red
Indicates that the total PoE power output
of the switch has exceeded the Guard
Band threshold of 223 W, but is still below
the total budget of 230 W.
O
The total PoE power consumption is below
the 223 W Guard Band threshold.
3
Link/Act/
Speed
(Ports 1
to 16)
Solid
amber
There is an active link negotiated at 10/100
Mbps on this port.
Blinking
amber
There is trac on the port at 10/100 Mbps.
O No link
9
10
11
12
13
14
15
16
17
18
100
5
6
7
8
1
2
3
4
5
6
7
8
1 3 5
4
2
1
2


Produkt Specifikationer

Mærke: D-Link
Kategori: bryter
Model: DSS-100E-18P
Vekselstrømsindgangsspænding: 100 - 240 V
Vekselstrømsindgangsfrekvens: 50 - 60 Hz
Bredde: 440 mm
Dybde: 178 mm
Højde: 44 mm
Vægt: 2137 g
Produktfarve: Sort
Opbevaringstemperatur (T-T): -40 - 70 °C
Relativ luftfugtighed ved drift (H-H): 0 - 95 %
Relativ luftfugtighed ved opbevaring (H-H): 0 - 95 %
Driftstemperatur (T-T): 0 - 40 °C
Certificering: IEC61000-4-5\nCE, RoHS, C-Tick
Strømforbrug (maks.): 265 W
Netværksstandarder: IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
LED-indikatorer: Activity, Link, PoE, Power, Speed
Harmoniseret systemkode (HS): 85176990
Strøm over Ethernet (PoE): Ja
Gennemsnitstid mellem fejl (MTBF): 30000 t
Switch-type: Ikke administreret
Total Power over Ethernet (PoE): 230 W
Power over Ethernet (PoE) effekt pr. port: 30 W
10G understøttelse: Ingen
Auto MDI/MDI-X: Ja
Basis omskiftning RJ-45 Ethernet porte, antal: 16
Basis omskiftning RJ-45 Ethernet porttype: Fast Ethernet (10/100)
Kombo SFP porte, antal: 1
Opbevar-og-frem: Ja
MAC adresselabel: 4000 entries
Switch kapacitet: 7.2 Gbit/sek.
Antal blæsere: 1 blæser(e)
Varmeafgivelse: 120 BUT/t
Gigabit Ethernet (kobber) porte, antal: 1
Power over Ethernet (PoE) porte, antal: 16
Strømforsyning inkluderet: Ja
Pakke bufferlager: 0.352 MB
Hastighed for videresendelse: 5.36 Mpps

Har du brug for hjælp?

Hvis du har brug for hjælp til D-Link DSS-100E-18P stil et spørgsmål nedenfor, og andre brugere vil svare dig