Defy DMO383 Manual

Defy Magnetron DMO383

Læs gratis den danske manual til Defy DMO383 (35 sider) i kategorien Magnetron. Denne vejledning er vurderet som hjælpsom af 67 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 34 anmeldelser. Har du et spørgsmål om Defy DMO383, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/35

SDB 5006T

EN User Manual SET TOP BOX

CZ Uživatelská příručka SET TOP BOX

SK Používateľská príručka SET TOP BOX

HU Felhasználói kézikönyv SET TOP BOX

PL Podręcznik użytkownika SET TOP BOX

EN 3

Table of Contents

SAFETY INFORMATION ........................................................................................................................ 5

Important safety measures ............................................................................................................ 6

Installation .......................................................................................................................................... 6

Use .....................................................................................................................................................7

Repairs ................................................................................................................................................ 8

HOME .................................................................................................................................................... 9

Information About This STB .......................................................................................................... 9

Front panel ......................................................................................................................................... 9

Rear panel .......................................................................................................................................... 9

Learning remote control .................................................................................................................. 11

Switch remote control mode (supports multiple Sencor set top boxes) ............................. 11

Programmable button learning mode ......................................................................................... 11

SYSTEM CONNECTION .......................................................................................................................12

General information.........................................................................................................................12

GET STARTED .........................................................................................................................................13

Welcome ............................................................................................................................................13

Installation .........................................................................................................................................13

CONTROLS ..............................................................................................................................................15

Switching Channels .........................................................................................................................15

Opening the Electronic programming guide (EPG) .................................................................15

EDITING CHANNELS ............................................................................................................................16

Edit Channel menu ..........................................................................................................................16

TV Channel List ................................................................................................................................16

Radio Channel List .......................................................................................................................... 17

Delete All ........................................................................................................................................... 17

SYSTEM SETTINGS ..............................................................................................................................18

System Setup menu .......................................................................................................................18

Language ...........................................................................................................................................18

TV System ........................................................................................................................................19

Local Time Setting ..........................................................................................................................19

Timer Setting ...................................................................................................................................20

Parental Lock ...................................................................................................................................20

OSD Setting ...................................................................................................................................... 21

Favorite ...............................................................................................................................................21

4 EN

Audio Description Setting .............................................................................................................22

Other ..................................................................................................................................................22

HDMI CEC ........................................................................................................................................22

TOOLS ..................................................................................................................................................23

Tools main menu ............................................................................................................................23

Information .......................................................................................................................................23

Factory Setting ................................................................................................................................23

Software Upgrade ...........................................................................................................................24

Remove USB device safely ......................................................................................................... 24

MULTIMEDIA PLAYER .........................................................................................................................25

Multimedia player main menu ..................................................................................................25

Media Playback ..............................................................................................................................25

DVR Settings ...................................................................................................................................28

TIME SHIFT / RECORDING ................................................................................................................29

Timeshift ...........................................................................................................................................29

Record ...............................................................................................................................................30

TROUBLESHOOTING............................................................................................................................31

TECHNICAL DATA .................................................................................................................................32

EN 5

Safety Information

TO MINIMIZE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT

TO RAIN OR MOISTURE.

NOTICE

RISK OF ELECTRIC SHOCK

CURRENT - DO NOT OPEN

CAUTION

To minimize ﬁre hazard or electric shock, do not remove the cover (or the rear

panel) of the device. Leave all repairs to qualiﬁed service technicians.

The lightning bolt symbol, located in an equilateral triangle, alerts the user to the

existence of uninsulated "dangerous voltages" inside the device that may be of

such intensity as to constitute arisk of electric shock.

The exclamation point symbol within the equilateral triangle alerts the user

to the existence of important operating and maintenance instructions in the

instrument'saccompanying documentation.

WARNINGTO MINIMIZE FIRE HAZARD OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS DEVICE TO RAIN OR HUMIDITY.

CAUTION

TO PREVENT FIRE HAZARD OR ELECTRIC SHOCK, ALIGN THE PLUG WIDE

BLADE WITH THE SOCKET WIDE SLOT AND PUSH THE PLUG AS FAR AS IT

GOES.

This symbol indicates that the appliance has double insulation between the

dangerous mains voltage and the parts accessible to the user. In case of service,

use only identical spare parts.

Do not expose the unit to dripping or splashing water or place objects ﬁlled with liquid,

such as vases, on the unit.

6 EN

IMPORTANT SAFETY MEASURES

In the production of this set-top box, great attention was paid not only to meeting quality

standards, but also to ensuring safety, which is adecisive factor in the design of each of

our devices. But you must also do your part to ensure safety. This document contains

important information that will teach you how to use this set-top box and its accessories

properly so that you are satisﬁed. Please read them carefully before installing and using

this set-top box.

Installation

1. Read and observe the instructions - Please read all safety and operating instructions

before using this set-top-box. Follow all operating instructions.

2. Keep the instructions - Keep the safety instructions and operating instructions for

future reference.

3. Heed the warnings - Observe all warnings on the set-top-box and in the operating

instructions.

4. Power - This set-top box is powered from the DC adapter power plug. To avoid the

risk of electric shock, ensure that the adapter is correctly connected to the power

outlet.

5. Power Sources – Only power sources that meet the ratings listed on the label on the

rear panel of the set-top box may be used to power this set-top box. If you are not

sure what type of power source is available at your home or ofﬁce, contact your set-

top box dealer or electrician. For set-top boxes designed to run on batteries or other

power sources, please read the operating instructions.

6. Overloading - Do not overload the power outlets and extension cords to avoid risk

of ﬁre or electric shock. Overloaded power outlets and extension cords, frayed power

cords, damaged or cracked conductor insulations and damaged plugs are dangerous

and may lead to electric shock or ﬁre. Inspect the cord on regular basis and if it

appears that insulation damage or property deterioration may have occurred, ask

aqualiﬁed service technician for areplacement.

7. Power cord protection - Route power cords so that they cannot be stepped on or

damaged by placing objects on or against them, paying particular attention to where

they exit the set-top box.

8. Ventilation - Cutouts and openings in the cabinet of the unit are used for ventilation

to ensure reliable operation of the set-top box and to protect it from overheating. It is

forbidden to block or cover these openings. These openings must never be blocked

by placing the set-top box on abed, sofa, mat or air heating device. Do not place this

set-top-box in an enclosed space such as afridge or aself unless proper ventilation is

provided or it this is inconsistent with the set-to-box manufacturer requirements.

EN 7

9. Accessories - To avoid any danger, do not use accessories other than those

recommended by the manufacturer of this set-top box.

10. Do not expose the unit to dripping or splashing water or place objects ﬁlled with

liquid, such as vases, on the unit.

Warning: Be safe when using electricity. The equipment or accessories supplied from

the power line and connected to this device must be marked with the certiﬁcation

mark on the accessory itself and must not be modiﬁed so as to block the safety

functions. This minimises the potential risk of electric shock or ﬁre. In case of any

doubt, contact aqualiﬁed service technician.

11. Accessories - Do not place this set-top box on an unstable cart, stand, tripod,

bracket or table. The set-top box could fall to the ground and cause serious injury

to children or adults, or seriously damage itself. Use this set-top box only with the

cart, stand, bracket or table recommended by the manufacturer or sold with the

set-top box. Any installation of the device must be carried out in accordance with

the manufacturer'sinstructions and the mounting accessories recommended by the

manufacturer must be used.

11a. Be careful when moving the set-top box trolley. Quick stops, excessive force and

uneven surfaces can cause damage to the set-top box.

12. Outdoor aerial grounding - If an outdoor aerial or cable system is connected to

this set-top-box, it’snecessary that this aerial or cable system should be earthed

to provide acertain protection against voltage surges and static charge formation.

Section 810 of the National Electrical Code, ANSI/NFPA No. 70-1984 (Section

No. 54 of the Canadian Electrical Code, Part 1) provides instructions on proper

grounding of the pole and the supporting framework, grounding the connecting lead

to the aerial’sdischarge unit, connecting to the grounding electrodes and grounding

electrode requirements.

13. Power Lines - The outdoor antenna system shall not be located near overhead power

lines, other electric light or power circuits, or where it could fall on such power lines

or circuits. When installing an outdoor antenna system, you must be extremely

careful not to touch or approach such electrical lines or circuits, as this could be fatal.

Installing an outdoor antenna can be dangerous, so leave it to the professionals who

install antennas.

Use

14. Cleaning - Unplug this set-top box from the power outlet before cleaning. Do not use

liquid or spray cleaners. Use adamp cloth for cleaning.

15. Objects that can touch dangerous voltage points or "short out" parts can cause ﬁre or

electric shock. Avoid spilling any liquid on the set-top box.

16. Lightning thunderstorms - For increased protection of this set-top-box during

alightning thunderstorm or for longer periods when the device will not be used,

disconnect the power cord from the power socket and disconnect the antenna or

cable system. This will protect the set-top box from damage caused by lightning and

power surges in the power grid.

8 EN

Repairs

17. Repairs - Do not attempt to repair this set-top box yourself, as opening the cabinet or

removing the covers could expose you to dangerous voltage or other hazards. Entrust

all repairs to qualiﬁed service technicians.

18. Damage requiring repair - In the following situations, unplug the set-top box from the

power outlet and have it repaired by qualiﬁed service technicians:

A. If the power adapter or the connecting power cable is damaged.

B. If liquid or foreign objects get into the set-top box.

C. If the set-top box has been exposed to rain or water.

D. If the image is not displayed correctly even though you follow the operating

instructions.Only adjust the controls that are described in this manual. Improper

adjustment of other controls can result in damage, and restoring the set-top box to

normal operation often requires asigniﬁcant amount of work by aqualiﬁed service

technician.

E. If the set-top box has fallen to the ground or its cabinet has been damaged.

F. If the set-top box shows an obvious change in behaviour - this clearly indicates the

need for repair.

19. Replacement Parts - If replacement parts are required, ask the service technician to

verify that the replacement parts used have the same safety characteristics as the

original replacement parts. Using replacement parts speciﬁed by the set-top box

manufacturer protects you from the risk of ﬁre, electric shock or other hazards.

20. Safety Check - After completing any service or repair on this set-top box, ask your

service technician to perform the manufacturer'srecommended safety checks to

verify safe operation of the set-top box.

21. Wall or Ceiling Mounting - This unit can only be wall or ceiling mounted in the

manner recommended by the manufacturer.

22. Heat - This appliance must be located away from any heat sources such as radiators,

air handlers, stoves or similar devices (including ampliﬁers) that produce heat.

EN 9

Home

Information About This STB

Front panel

USB port

Display

Remote control sensor

Channel

up/down

Standby button (Stand-by

mode)

Power indicator

Rear panel

RF IN

5V 50mA

RF OUT COAXIAL SCART DC IN

TV antenna

For external TV antenna

HDMI output

12V/1A DC power

supply

VF bypass loop

for external device

Digital coaxial audio

TV Scart

Connecting to aTV set

10 EN

Remote control

2. PLAY (Playback)

3. PAUSE (Pause / Activate Time Shift

function)

4. (TV/radio)TV/RADIO

(Switching between TV and radio

modes)

5. MEDIA (Media)

(Open the Record menu)

6. RED/GREEN/YELLOW/Blue button

(For interactive functions / Nested

menu function buttons)

7. (Electronic Programme Guide)EPG

(Open the Electronic Programme

Guide menu)

8. OK button

(Conﬁrmation of selection in the

offer)

9. (Previous/Next Cursor / CH+,-

Channel) / VOL+,- (Volume Up/

Down)

(Cursor: Navigation buttons to browse

menu items)

(CH+/-: Previous/Next channel)

(VOL+/-: Volume up/down)

10. (Menu)Menu

(Open and close the menu screen)

11. Search backward/forward

12. MUTE (Mute)

13. Numeric buttons

(For entering numeric values and

selecting achannel by directly

entering its number)

14. (Teletext - opening interactive TTX

services)

15. STANDBY (Standby)

(Turning the STB on or switching to

standby)

16. (Record)RECORD

(TV programme recording)

17. STOP (Stop)

(Stop playback or programme

recording)

18. (Favourites)FAV

(Open favourites list)

19. AUDIO (Sound)

(Selecting the audio mode and audio

track)

20. (Back)BACK

(Switch to previous channel)

21. (End offer)EXIT

22. INFO (information)

(Press to view information about the

current channel)

23. Previous/Next

24. SUBTITLE (Turn subtitles on/off)

EN 11

Learning remote control (1)

The remote control with four learning buttons is compatible with Sencor set top box

models SDB 550T, SDB 5002T, SDB 5003T, SDB 5104T (ﬁrst group, factory set) or SDB

520T (second group, after switching mode). In case your set top box does not respond

to the commands of this remote control, ﬁrst check the battery level (AAA, not included)

and if necessary switch the remote control mode as described below. The manufacturer

does not guarantee compatibility with all TVs or other set top boxes. The function of the

remaining buttons corresponds to those of the original controller.

Switch remote control mode

(supports multiple Sencor set top boxes)

1. Press and hold the red “POWER” button together with the “0” button for 6 seconds

(until the LED ﬂashes 3 times).

2. This changed the setting of the control codes from the ﬁrst group to the second

group.

3. You can switch between groups at will by repeating step 1.

Programmable button learning mode

1. To enter the learning mode, press the “SET” button in the TV CONTROL area for

3seconds (until the LED lights up intensely).

2. Press the blue “POWER” button of the learning remote control (the LED will ﬂash

slowly).

3. Point the TV remote control directly at the learning remote control from adistance of

3–5 cm.

4. Press and hold down the “POWER” button on the TV remote control for

approximately 3 seconds (the LED will ﬂash rapidly) until the LED stops ﬂashing

(learning has been successful).

5. Repeat steps 2–4 to learn the other remote control nds (INPUT, VOL-, VOL+).comma

6. To exit the learning mode and save the learned codes, brieﬂy press the “SET” button

(LED will go off).

12 EN

System connection

General information

There are many different types of TVs and other devices that can be connected to this

STB. This guide lists the most common ways to connect your devices.

Connecting aTV

HDMI TV

Antenna

RF cable

HDMI cable

Scart cable

Remark:

Please connect the HDMI cable to the receiver ONLY when turned off (red Standby

indicator lights)

EN 13

Get Started

Welcome

When using this STB for the ﬁrst time, “Welcome" menu will appear.

Press the cursor keys to set Region, Language, Display Mode and Aspect Mode.

Highlight “OK” and press “OK” to start searching the channels.

Installation

The Installation menu allows you to set channel searching and LCN Installation option.

1. Press the "MENU" button to open the main menu.

2. Press the “UP” or “DOWN” button to highlight “Installation” and press “RIGHT” to

open the “Installation” menu.

3. Press the “UP” or DOWN” cursor button to highlight the desired item, then press

“OK” to open the nested menu.

4. Press the "EXIT" button to exit.

Auto Scan (Automatic search)

The “Auto Search” menu allows you to set automatic channel searching.

1. Select “Auto Scan” and press "OK” to open the “Auto Scan” menu.

2. Press the cursor buttons to set “FTA Only” (non-encoded only) and “T2 Signal Only“.

3. Highlight the “Search“ item and press ”OK” to start the automatic scan.

14 EN

Channel Scan

The “Channel scan” menu allows you to set manual channel searching.

1. Select “Channel Scan” and press "OK” to open the Channel Scan menu.

2. Press the cursor buttons to set Scan Mode, Scan Band, Channel No. Frequency,

Bandwidth, then highlight “Search” and press “OK” to start the channel searching.

LCN (Logical Channel Numbering)

If the LCN (Logical channel numbering) feature is enabled, you cannot change the original

TV channel numbers created by searching.

You can activate/deactivate the LCN function by setting "LCN" to on/off.

EN 15

Controls

Switching Channels

There are three ways to select achannel - by scrolling through the channel list, selecting

by number and selecting from the on-screen channel list.

1. Scroll through the channel list:

To move through the channel list, press the up or down arrow button on the remote

control.

2. Selection by number:

Enter the channel number directly by pressing the numeric buttons and press the

"OK" button to select the desired channel.

3. Select from the list of channels on the screen:

You can also select the desired channel number directly in the screen channel list. To

display this list, press OK. For more details, please refer to “Editing channels” section

in this manual.

Opening the Electronic programming guide (EPG)

To open the EPG for all channels:

1. Press the "EPG" button to open the EPG (Electronic Programme Guide) menu.

2. Press the cursor buttons to switch between the channel list and current/next events.

3. Press the GREEN button to set the event timer.

4. Press the RED button to display the “Time Bar” menu.

5. Press “OK” to display selected event information.

6. Press the "EXIT" button to return to the previous menu.

In the “Time bar” menu:

To exit the time bar.

Back to the current time.

Skip forward or backward in time in 30-minute steps.

Skip forward or backward in time 2-hour steps.

Skip forward or backward in time 24-hour steps.

18 EN

System Settings

System Setup menu

The System Setup alows you to set Language, TV System, Local Time Setting, Timer

Setting, Parental Lock, OSD Setting, Favorite, Audio Description Setting and Other.

1. Press the "MENU" button to open the main menu.

2. Press the “UP” or “DOWN” button to highlight “System Setup” and press “RIGHT” to

open the System Setup” menu.

3. Press the “UP” or DOWN” cursor button to highlight the desired item, then press

“OK” to open the nested menu.

4. Press the "EXIT" button to exit.

Language

This menu allows you to set the language of system, audio, subtitles and teletext and

enable the subtitle function.

Subtitles: Off/Normal/Hard of Hearing

Produkt Specifikationer

Mærke:	Defy
Kategori:	Magnetron
Model:	DMO383

Har du brug for hjælp?

Hvis du har brug for hjælp til Defy DMO383 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Magnetron Defy Manualer

27 December 2024

25 August 2024

25 August 2024

25 August 2024

25 August 2024

25 August 2024

25 August 2024

12 August 2024

7 August 2024

5 August 2024

Magnetron Manualer

Nyeste Magnetron Manualer

Toshiba MWP-MM20P(WH) Manual

27 Marts 2025

Whirlpool WMN461BXF Manual

4 Marts 2025

LG MSER1130B Manual

3 Marts 2025

Stoves ST BIMWG6025 Manual

27 Februar 2025

Midea EM720CWW Manual

26 Februar 2025

Sheffield PLA0920 Manual

26 Februar 2025

Sheffield PLA0925 Manual

26 Februar 2025

Amana AMV6507RGS Manual

20 Februar 2025

Rival RGTM702 Manual

27 Januar 2025

Ikea ÄSKEBO 605.876.15 Manual

16 Januar 2025