Denver CUT-301 Manual

Denver Bilradio CUT-301

Læs gratis den danske manual til Denver CUT-301 (12 sider) i kategorien Bilradio. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Denver CUT-301, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

INSTRUCTION MANUAL

Car Stereo

MP3/WMA/MPEG4 Player

with PLL FM Stereo Radio

Radio Data System

3 Inch TFT-LCD Display

USB / SD/MMC Card Input

Front AUX IN

Touch Screen Control

Flip Down/Detachable Front Panel

CUT-301

EN-2

INSTALLATION

PRECAUTIONS

• Choose the mounting location carefully so that the unit will not interfere with the normal driving functions of the

driver.

• Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight or hot air from

the heater, or where it would be subject to dust, dirt or excessive vibration.

• Use only the supplied mounting hardware for a safe and secure installation.

• Be sure to remove the front panel before installing the unit.

NOTE : Inclination angle for car radio installation must not exceed 30˚ otherwise the front panel will not open.

NOTE: Keep the release key in the safe place as you may need it in future to remove the unit from the car.

Detaching and attaching the front panel

The front panel of this unit can be detached in order to prevent the unit from being stolen.

FOLDING DOWN AND DETACHING/ATTACHING THE FRONT PANEL

Before detaching the front panel, be sure to press the button (1) OFF rst.

Then press the button, let the Front Panel arrive in horizontal position and detach the panel by pulling it towards you

as illustrated.

Notes:

• Do not press the front panel hard against the unit when attaching it. It can be easily attached by pressing it lightly

against the unit.

• When you carry the front panel with you, put it in the supplied front panel case.

• Do not press hard or give excessive pressure to the display window of the front panel when attaching it to the

unit.

CLEANING THE CONNECTOR

The unit may not function properly if the connectors between the unit

and the front panel are contaminated with dirt. In order to prevent this

from happening, detach the front panel by pressing the button and

clean the connector from time to time.

Clean the connector with a cotton swab together with contact cleaner

as illustrated. Be sure to clean them carefully pin by pin and make

sure not to damage the connecting points.

182 mm

53mm

TAP

Bend these

claws, if necessay

<10°

Cotton Swab

Rear of

front panel

Main unit

Produkt Specifikationer

Mærke:	Denver
Kategori:	Bilradio
Model:	CUT-301

Har du brug for hjælp?

Hvis du har brug for hjælp til Denver CUT-301 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Bilradio Denver Manualer

Denver CAU-444BT Manual

1 Juni 2025

Denver CAU-420 Manual

2 Oktober 2024

Denver CUT-301 Manual

11 September 2024

Denver CAT-131 Manual

1 September 2024

Denver CAD-495 Manual

25 August 2024

Denver cau 410 Manual

25 August 2024

Denver CAT-720TWIN Manual

25 August 2024

Denver CAT-710SINGLE Manual

25 August 2024

Denver CAD-490 Manual

6 August 2024

Denver CAU-450BT Manual

26 Juli 2024

Bilradio Manualer

Nyeste Bilradio Manualer

Vordon Pilot AC-920 Manual

15 Juni 2025

Manta RS4508 Manual

15 Juni 2025

Krüger&Matz KM2014 Manual

9 Juni 2025

Blow Pilot AVH-8624 Manual

9 Juni 2025

Krüger&Matz KM2009 Manual

9 Juni 2025

Krüger&Matz KM2004 Manual

9 Juni 2025

Vordon York HT-930 Manual

8 Juni 2025

Carlinkit CPC200-U2W Plus Manual

8 Juni 2025

Vordon Jersey HT-800 Manual

8 Juni 2025

Peiying PY-8288 Manual

7 Juni 2025