Digital Watchdog DWC-P336CMW Manual


Læs gratis den danske manual til Digital Watchdog DWC-P336CMW (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Digital Watchdog DWC-P336CMW, eller vil du spørge andre brugere om produktet?

Side 1/2
DWC-P336CMW
Ceiling mount bracket for white IP PTZ cameras
Quick Start Guide
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours: 9:00AM 8:00PM EST, Monday through Friday
digital-watchdog.com
NOTE: Download all your support materials and tools in one place.
1. Go to: http://www.digital-watchdog.com/resources
2. Search your product by entering the part number in the search bar. Results ‘Search by Product
for applicable part numbers will populate automatically based on the part number you enter.
3. Click ‘Search. All supported materials, including manuals
and quick start guide (QSGs) will appear in the results.
WHAT’S IN THE BOX
3x plastic anchors (6pi) 1x hex Allen wrench
3x tapping screws (6x35) 1x quick setup guide
Plastic anchor (3x)
Ceiling mount (1x)
Locking nut (1x)
Tapping screw 6x35 (3x)
Safety wire (1x)
Machine screw M5x6 (1x)
Pipe socket PF 1.5 inch (1x)
Set screw (3x)
Set screw (2x)
Socket (1x)
Adapter PT 1.5 inch (1x)
Set screw (1x)
Start point
Set point
Twist (Long indicator)
(Short indicator)
INSTALLING THE MOUNTING ACCESSORY
Rev Date: 01/20
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.
Quick Start Guide
1. Using the wall mount, mark and drill the mounting holes on the surface using the ceiling mountange.
2. Pull wires through to connect to the PTZ camera from the ceiling.
3. Using the plastic anchors and screws*, mount and secure the mounting bracket to the mounting surface.
4.7” (120mm)
4.4” (112mm)
3x 0.25” (6.5mm)
5.07” (129mm)
15.75”
(400mm)
4. Open the access plate and pull out
cables through the rectangular
access hole.
5. Attach the 1.5-inch adapter to the
ceiling mount bracket andx it
using the set screw.
6. Attach the camera’s safety wire
to the ceiling mount bracket and
organize cables.
7. Close the access plate of the ceiling
mount bracket.
8. Push in and turn the camera
clockwise into the adapter. Fix it
using the set screw of the adapter.


Produkt Specifikationer

Mærke: Digital Watchdog
Kategori: Ikke kategoriseret
Model: DWC-P336CMW

Har du brug for hjælp?

Hvis du har brug for hjælp til Digital Watchdog DWC-P336CMW stil et spørgsmål nedenfor, og andre brugere vil svare dig