Digitus DA-81002 Manual

Digitus Stregkodelæser DA-81002

Læs gratis den danske manual til Digitus DA-81002 (45 sider) i kategorien Stregkodelæser. Denne vejledning er vurderet som hjælpsom af 42 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 21.5 anmeldelser. Har du et spørgsmål om Digitus DA-81002, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/45

2 D Barcode Hand Scanner,

QR-Code Compatible

QIG

DA 8100- 2

1. Operating Setting

The factory default settings of DA-81002 can meet the needs of users for direct use in most cases.

You can also set the parameters through the setting code according to actual needs.

1.1 Use of the setting code

Read the "Enable Setting Code" to configure the function of the reading module (setting code

function). After the function is turned on, you can modify the parameters of the reader module by

reading one or more setting codes. After reading the "Close Setting Code", the scanning module will

exit the setting state.

**Enable Setting Code

Close Setting Code

Set the code content output enable and disable.

Output setting

code content

**Do not output the content of the setting code

Note: The options marked with (**) in the setting code indicate the default functions or

parameters.

1.2 Factory Default Reset

After reading this setting code, the current parameter setting will be lost and the factory default

value will be restored. The factory default parameters and functions can be found in Appendix C.

Restore Factory Default

Note: Please use the "Restore Factory Default" function with caution.

1.3 User default settings

In addition to restoring factory settings, users can save frequently used settings as user default

settings. By reading "Save current settings as user default settings", the current device configuration

can be saved as user default information for quick settings when needed.

Produkt Specifikationer

Mærke:	Digitus
Kategori:	Stregkodelæser
Model:	DA-81002
Kode for international beskyttelse (IP):	IP54
Type:	Håndholdt stregkodelæser
Bredde:	63 mm
Dybde:	87 mm
Højde:	165 mm
Vægt:	120 g
Produktfarve:	Sort
Opbevaringstemperatur (T-T):	-40 - 70 °C
Driftstemperatur (T-T):	-20 - 50 °C
Scanner type:	1D/2D
Husmateriale:	Acrylonitrile butadiene styrene (ABS), Polycarbonate (PC)
Forbindelsesteknologi:	Ledningsført
Strømkilde type:	USB
Kabellængde:	2 m
Harmoniseret systemkode (HS):	84716070
Understøttede mobile operativsystemer:	Android, iOS
Indgangsspænding:	5 V
Kompatible operativsystemer:	Mac/Linux
Understøttede Windows-operativsystemer:	Ja
Sensortype:	CMOS
Oprindelsesland:	Kina
Standard grænseflader:	RJ-45, USB
Strømforbrug:	120 mA
Lyskilde:	650 nm
Maksimal skanningsbredde:	100 mm
Læsehastighed (maks.):	200 læs/sek.
Tilt læsningsvinkel:	-60 - 60 °
Understøtter lineær (1D) stregkoder:	Codabar, Code 128, Code 32, Code 39, Code 93, EAN 128, EAN-13, EAN-8, GS1 DataBar, GS1-128 (UCC/EAN-128), IATA, ISSN, ITF-14, ITF-6, Industrial 2 of 5, MSI, U.P.C.
Understøtter matrix (2D) stregkoder:	Data Matrix, PDF417, QR Code