Argox AS-8250 Manual

Argox Stregkodelæser AS-8250

Læs gratis den danske manual til Argox AS-8250 (123 sider) i kategorien Stregkodelæser. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Argox AS-8250, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/123

NOTICE:

This equipment has been tested and complied with

the limits for a Class a digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to

provide a reasonable protection against harmful

interface when the equipment is operated under a

commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the

instruction manual, may cause harmful interface to

radio communications. Operation of this equipment in

a residential area is likely to cause harmful interface in

which case the user will be required to correct the

interface at his own expenses.

Note: All brands and trademarks shall belong to their

respective owner.

Note: Specification is subject to changes without

notice.

This device complies with Part 15 of the FCC Rules.

Operation shall be subject to the following two

conditions:

(1) This device may not cause harmful interface, and

(2)

This device must accept any interface received,

including interface that may cause undesirable

operation.

Using the ArgoxScan

8110/8120/8150/8250/8310/8312

The ArgoxScan can automatically scan barcode at a distance.

Simply aim and pull the trigger. Code scanning is performed

along the center of the light bar emitted from the reading

window. This bar must cover the entire code.

Successful scanning shall be obtained by tilting the scanner

with respect to the barcode to avoid direct reflections that

impair the reading performance, especially for 2D barcode.

Recommended Steps

When the required settings have been configured, all settings

are stored in non- volatile memory of scanner after reading

EXIT Label. Recommended steps are as follows.

1) Set right host interface for your scanner.

(The scanner is in factory default shown as bold label)

2) Set interface to optimize protocol of scanner with your

host in interface section.

3) Set system control of scanner, such as specific

adjustments double confirm, power saving, indicator

and scanning mode which you prefer usage in system

control section.

4) Set code options of scanner for your usage in code

option section. You must make sure to enable the

symbology first, then Min./Max. code length, code ID

checksum and truncate digits are also converted.

5) Set string format of the scanner, such as preamble,

postamble Prefix, suffix, code ID and code name

transmission for your application in string format

section.

Note: If still not work properly. Please contact your dealer for

further information.







Produkt Specifikationer

Mærke:	Argox
Kategori:	Stregkodelæser
Model:	AS-8250

Har du brug for hjælp?

Hvis du har brug for hjælp til Argox AS-8250 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Stregkodelæser Argox Manualer

14 September 2025

12 September 2025

12 September 2025

29 August 2024

29 August 2024

29 August 2024

Argox AS-8020CL Manual

29 August 2024

Argox AI-6821 Manual

28 August 2024

Argox AI-6821HD Manual

28 August 2024

Argox AS-8000 Manual

28 August 2024

Stregkodelæser Manualer

Nyeste Stregkodelæser Manualer

I.safe Mobile IS-TH2ER.1 Manual

10 September 2025

Newland HR23 Dorada Bluetooth Manual

6 September 2025

Newland HR23 Dorada Corded Manual

6 September 2025

Newland HR23 Dorada Manual

6 September 2025

Manhattan 154185 Manual

31 August 2025

Wasp WWR2900 Manual

30 August 2025

Wasp WWR2905 Manual

29 August 2025

Wasp WRS100SBR Manual

29 August 2025

Newland FR4080 Koi II Manual

29 August 2025

Star Micronics BSD-40U Manual

28 August 2025