Digitus DN-14001-2 Manual


Læs gratis den danske manual til Digitus DN-14001-2 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Digitus DN-14001-2, eller vil du spørge andre brugere om produktet?

Side 1/6
Quick Installation Guide
DN- -214001
2
1. Introduction
Intelligent, fast and intelligent state tester for connection of telephone and
network harness Check the connection between RJ45 connector and wire-
harness. Accurately determine which end of the RJ45 connector is
Connecting with the network line perfectly solves the problem that the
ordinary tester cannot determine two water. In the end, the RJ45
connector is not connected at that end, so as to save time.
2. Test
Pull the power switch up to ( ) position, QC
and the yellow power lamp of the host (QC)
is always on. The machine is in working
condition.
Insert one end of the RJ45 connector (or
RJ11 connector) into (QC) which needs to
be inspected check port.
The connector is connected with the wire
harness in good condition, and the wire
harness indicator lights are all on.


Produkt Specifikationer

Mærke: Digitus
Kategori: Ikke kategoriseret
Model: DN-14001-2

Har du brug for hjælp?

Hvis du har brug for hjælp til Digitus DN-14001-2 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Digitus Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer