Digitus DN-93601 Manual

Digitus Ikke kategoriseret DN-93601

Læs gratis den danske manual til Digitus DN-93601 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 48 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 24.5 anmeldelser. Har du et spørgsmål om Digitus DN-93601, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

4 5

Keystone Jack

Installing Instruction

DN-93601

Follow the direction on the colorcoding

sticker to position T568A or T568B wiring,

separate a little space on proper position

and insert the wire pair by pair into each

slot.

Use 110 or KRONE impact tool to

press and cut off each conductor.

Unshielded type

Shielded type

Insert the IDC cap to x these

wires. Insert the cable tie to tight

up the cable jacket and complete

the installation.

30 mm

I.D.C. Cable tie

T568A

Pin 5 White/Blue

Pin 4 Blue

Pin 1 White/Green

Pin 2 Green

Pin 3 White/Orange

Pin 6 Orange

Pin 7 White/Brown

Pin 8 Brown

T568B

Pin 5 White/Blue

Pin 4 Blue

Pin 1 White/Orange

Pin 2 Orange

Pin 3 White/Green

Pin 6 Green

Pin 7 White/Brown

Pin 8 Brown

Strip approximately 30mm of the cable jacket,

and separate to 4 pair each

Cover the Full shield, then

complete the installation.

( Note: Full shield has to insert into this plastic slot )

Slide the cable jacket into

Cable Holder.

Follow the direction on the color coding

sticker to position T568A or T568B wiring,

separate a little space on proper position

and insert the wire pair by pair into each

slot. Use 110 or KRONE impact tool to

press and cut off each conductor

Insert the cable tie to tight up the cable

jacket. Insert the IDC cap to x these

wires.

Produkt Specifikationer

Mærke:	Digitus
Kategori:	Ikke kategoriseret
Model:	DN-93601
Bredde:	35 mm
Dybde:	20 mm
Højde:	25 mm
Produktfarve:	Sort
Pakkebredde:	75 mm
Pakkehøjde:	110 mm
Harmoniseret systemkode (HS):	85369010
Oprindelsesland:	Kina