Doepfer A-136 Manual


Læs gratis den danske manual til Doepfer A-136 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Doepfer A-136, eller vil du spørge andre brugere om produktet?

Side 1/6
doepfer System A - 100 Distortion / Waveshaper A-136
1
1. Introduction
Module A-136 is a distortion and waveshaping mo-
dule with extensive control possibilities. Different set-
tings of 5 distortion/waveshaping parameters enable a
lot of very complex and extreme waveform modificati-
ons.
The incoming audio or cv signal is divided into 3
sections: original, positive and negative component.
For the positive and negative component, clipping
levels (L) are defined. Only voltages beyond this level
effect the output signal. For each of the three sections
the positive or negative amplification (A) can be adju-
sted.
External control voltages can be used to alter both
clipping levels so that dynamic waveform changes are
possible.
The range of modification goes from simple soft or hard
clipping to completely altered waveforms where the
original signal is no longer recognizable.
Typical applications are audio distortion, and waveform
modification for audio signals as well as for control
voltages (LFO, ADSR, random etc.).
Output
+ A
Input
A-136
DIS
A
- A
+ L
- L
Ext. Level
Ext. Level
A-136 Distortion / Waveshaper System A - 100 doepfer
2
2. DIS - Overview Controls:
1 A : Amplification control for original signal
2 + L : Clipping control for positive signal compo-
nent
3 - L : Clipping control for negative signal com-
ponent
4 + A : Amplification control for positive signal
component (above the positive clipping
level)
5 - A : Amplification control for negative signal
component (below the negative clipping
level)
In / Outputs:
! Input : Signal input
" Ext. Level : ext. CV input for positive clipping level
§ Ext. Level : ext. CV input for negative clipping le-
vel
$ Output : Signal output
A-136
DIS
Ext. Level
Input
+ A
Distortion / Waveshaper
010
010
0 10
010
0 10
Output
Ext. Level
+ L
A
- L
- A
+A
-A
+L
-L
A


Produkt Specifikationer

Mærke: Doepfer
Kategori: Ikke kategoriseret
Model: A-136

Har du brug for hjælp?

Hvis du har brug for hjælp til Doepfer A-136 stil et spørgsmål nedenfor, og andre brugere vil svare dig