Doepfer A-140 Manual

Doepfer Ikke kategoriseret A-140

Læs gratis den danske manual til Doepfer A-140 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Doepfer A-140, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

doepfer System A - 100 ADSR A-140

1. Introduction

Module A-140 (ADSR) is an envelope generator,

and, since it puts out control voltages, counts as one

of the modulation devices in a modular system.

As soon as the gate input receives sufficient voltage,

the ADSR generates a variable voltage, changing in

time, called an envelope. This varying voltage is

output in normal (positive) and inverted form, and can

be used, eg., for voltage controlled modulation of a

VCO, VCF, or VCA, or for processing other modules’

inputs and outputs.

The shape of the envelope is governed by four para-

meters: A D Sttack, ecay, ustain and Release (see Fig.

1 on page 3).

The envelope is started (triggered) by a gate signal

either from the INT.GATE voltage on the system bus,

or, if a signal is put into it, from the gate input socket.

The envelope can also be re-triggered, ie. start from

scratch again, each time a trigger signal is sensed at

the Retrig. input socket, when the gate is still open

(see Fig. 2 on page 5).

Gate

Decay

Inverse

Output

Release

Attack

A-140

ADSR

Sustain

Retrigger

Output

ADSR

Control

Time

Range

A-140 ADSR System A - 100 doepfer

2. ADSR overview Controls:

1 A: Attack time control

2 D: Decay time control

3 S: Sustain level control

4 R: Release time control

5 ADSR Control:LED envelope state indicator

6 Time Range:Three-position range switch

In / Outputs:

! Gate: Input for gate voltage

" Retrig.: Input for re-trigger voltage

§ Output: Output: responds to a gate signal by

putting out the voltage envelope set

by the controls.

$ Output: ditto

% Inverse Output: responds to a gate signal by

putting out an inversion of the voltage

envelope set by the controls.

A-140

ADSR

Retrig.

Output

Inverse

Output

ADSR

Control

Gate

➊

➋

➌

➍

➎

➀

➁

➂

➃

➄

Output

010

HLM

Time

Range

➅

0 10

010

0 10

ENVELOPE GEN.

Produkt Specifikationer

Mærke:	Doepfer
Kategori:	Ikke kategoriseret
Model:	A-140

Har du brug for hjælp?

Hvis du har brug for hjælp til Doepfer A-140 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Doepfer Manualer

Doepfer A-100 Manual

1 September 2024

Doepfer Dark Link Manual

21 August 2024

Doepfer A-196 Manual

20 August 2024

Doepfer A-134 Manual

20 August 2024

Doepfer A-135-2v Manual

19 August 2024

Doepfer A-145 Manual

19 August 2024

Doepfer A-101-2 Manual

19 August 2024

Doepfer A-99 Manual

19 August 2024

Doepfer A-103 Manual

19 August 2024

Doepfer A-165 Manual

18 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Ambient Weather WS-0265 Manual

18 September 2025

Emerson BAR322 Manual

18 September 2025

Ambient Weather EZ-29-24 Manual

18 September 2025

Newline TT-8624QPRO Manual

18 September 2025

Babysense Dreamer Manual

18 September 2025

Wesco 272755 Manual

18 September 2025

Newline TT-6523QA Manual

18 September 2025

Ambient Weather WS-8400 Manual

18 September 2025

Emerson ER100803 Manual

18 September 2025

Ambient Weather WS-YG501 Manual

18 September 2025