For use with DRS Rails and Patching Fittings (4-1/8”, 4-1/2”, 6” Headers)
Table of Contents
Table of contents
1 Technical specifications 3
1.1 RTS88 and PT21 Header
Specification Overview 3
1.1.1 General information 3
1.1.2 Glass requirements/fittings/mounting 3
1.1.3 Requirements for glass panel 3
1.1.4 Safety instructions 3
1.1.5 Symbols used - Safety/Installation 3
1.1.6 Maintenance, care, repair 3
1.1.7 Disposal 3
1.2 EML310 and EML320 Specifications Overview 4
1.1.1 General information 4
1.1.2 Listings 4
1.1.3 Conditions of acceptability 4
1.1.4 EML310/320 Mechanical specifications:
(Including 1/4” [6.4] mounting bracket) 4
1.1.5 EML371/372 Mechanical specifications:
(Including 3/16” [4.8] mounting bracket) 5
1.1.6 Environmental specifications: 5
1.1.7 EML310/320 Electrical specifications: 5
1.1.8 EML371/372 Electrical specifications: 5
1.1.9 Inspection and Maintenance 5
1.3 EML header options 6
1.4 Pin diameter specifications 7
2 RTS88 and PT21 installation instructions 8
2.1 Install header for single or double door: RTS88 8
2.2 Install header for single or double door: PT21 9
2.3 RTS88 adjustments 10
2.4 PT21 adjustments 10
3 EML and shim installation instructions 11
3.1 Prepare/disassemble mag lock body
and mounting plate 11
3.2 Secure header shim to frame/ceiling surface
(for 4-1/8” or 4-1/2” headers only) 11
3.3 Secure mounting bracket and mag lock to shim
(for 4-1/8” or 4-1/2” headers only) 12
3.4 Secure mounting bracket and mag lock to shim
(for 6” headers only) 13
4 Install armature plate 14
4.1 (For use with patch fittings only)
secure glass door bracket (GDB) 14
4.2 (For use with DRS rails only) 15
5 EML310/320 and 371/372 Options 16
5.1 Instant release of lock 16
5.2 Lock monitoring options - BA -
Bond Alert Sensor 16
5.3 Lock monitoring options - DP -
Door Position Sensor 16
6 Wiring the EML 17
6.1 Wiring mag lock body through header
(for EML310/320 and 371/372) 17
6.2 Wiring mag lock body
(for EML310/320) - continued 18
6.3 Wiring for BA or BA DP combination models
(for EML371/372) 19
6.4 Wiring for Unmonitored or DP sensor models
(for EML371/372) 19
7 EML310/320 and 371/372
trouble shooting guide 20