Dormakaba ES96F Manual

Dormakaba Ikke kategoriseret ES96F

Læs gratis den danske manual til Dormakaba ES96F (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 42 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 21.5 anmeldelser. Har du et spørgsmål om Dormakaba ES96F, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

F R A M E P R E P I N S T R UCTI O N S

E S 9 6 F

Electric Strikes

DORMA DRIVE, DRAWER AC, REAMSTOWN, PA 17567 PHONE: (800) 523-8483 (717) 336-3881 FAX: (717) 336-2106

EMAIL: archdw.us@dormakaba.com dormakaba.us WEBSITE:

PCN18035

R04-20GR

ISES96F_PREP

08281285

1. Place the folded template square to the frame. Horizontally align

holes marked on the template with the mounting holes in frame.

2. Peel adhesive backing and paste the folded template square to the

frame.

3. Carefully cut the frame inside the un-shaded area marked on the

template. Install strike per installation instructions 08281280.

For Cutting ANSI Prep Frames

NOTE: Specications subject to change without notice.

* Dimension F is measured from face of mounting tab to face of

frame.

** Dimension X on the drawing is determined by the vertical

centerline of the door. If the latch incorporates a deadlocking pin

additional steps will be necessary to ensure proper operation of the

deadlocking pin. Measure the thickness of the deadlocking pin and

add this thickness to Dimension X to relocate the vertical centerline an

appropriate distance on the frame.

Frame Prep Dimensions

MEASUREMENT

FRACTIONAL

INCHES

DECIMAL

INCHES

METRIC

A 1-1/4” 1.250 31.75

B 4-7/8” 4.875 123.83

C 3-3/8” 3.375 85.73

DF + 1-7/16” F + 1.438 F + 36.51

E 3/8” 0.375 9.53

F 3/16”* 0.188* 4.76*

G 1-11/16” 1.688 42.86

X Vertical Centre Line of Door

Lock and Mounting Face Plate**

K 4-1/8” 4.125 104.78

M 12-24 N/A N/A

Z 3-5/16” 3.315 84.14

DORMA DRIVE, DRAWER AC, REAMSTOWN, PA 17567 PHONE: (800) 523-8483 (717) 336-3881 FAX: (717) 336-2106

EMAIL: archdw.us@dormakaba.com dormakaba.us WEBSITE:

1. Mark the horizontal Lock Body Centerline on the door.

Close the door and transfer the Lock Body Centerline to the

frame.

If the door isn’t ush to the frame in the closed position, mark

the depth of the closed door on the frame. Measure half of the

door thickness back toward the door stop and mark the vertical

Door Centerline on the frame.

2. Horizontally align the proper Template Lock Centerline with

the Lock Body Centerline marked on the frame. Peel adhesive

backing and paste the folded template square to the frame.

If the door isn’t ush to the frame when closed, tear the

template at the fold line. Align the faceplate portion vertically

with the Door Centerline and match the template Lock

Centerline with the Lock Body Centerline marked on the frame.

Carefully paste the front portion of the template on face of

frame to align with the faceplate portion.

3. Carefully cut the frame inside the un-shaded area marked on

the template.

Follow Mounting Tab Installation Instructions.

For Cutting Frames without ANSI Prep

Frame

Self-Adhesive

Mounting Shim

(4 incl.)

Mounting bTa

(2 incl.)

12-24 Machine

Screws (2 Per Tab)

a) Fasten the mounting tabs to the faceplate of the strike,

selecting the appropriate shims for the installation.

b) Using the assembled strike and tabs as a template, place against the

frame and mark the mounting hole locations. Remove and drill a 3/16”

hole in frame for each mounting tab and countersink the frame.

c) Remove the tabs from the faceplate and install in the frame using the

12-24 x 3/8” machine screws supplied. Tabs are plated and drilled and

tapped for this purpose.

d) Install strike per installation instructions, 08281280.

Produkt Specifikationer

Mærke:	Dormakaba
Kategori:	Ikke kategoriseret
Model:	ES96F

Har du brug for hjælp?

Hvis du har brug for hjælp til Dormakaba ES96F stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Dormakaba Manualer

Dormakaba 3513-DM Manual

29 Juni 2025

Dormakaba Keyscan EC1500 Manual

21 August 2024

Dormakaba RCI S2500A Manual

21 August 2024

Dormakaba EAC Manual

21 August 2024

Dormakaba CLM9000 Manual

21 August 2024

Dormakaba DKX Type III Manual

21 August 2024

Dormakaba 9800 Manual

21 August 2024

Dormakaba HSW-GP Manual

21 August 2024

Dormakaba DKX-10 Manual

21 August 2024

Dormakaba Confidant RFID Kit 1 Manual

21 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Tripp Lite U339-001-FLAT Manual

31 Juli 2025

Tripp Lite IBLOK2-0 Manual

31 Juli 2025

Tripp Lite TR-6FM Manual

31 Juli 2025

L.R.Baggs Element Active System Manual

31 Juli 2025

Tripp Lite Protect It! TLP310USBCW Manual

31 Juli 2025

Tripp Lite PR25 Manual

31 Juli 2025

SolidDrive SD-1G Manual

31 Juli 2025

Tripp Lite PR7 Manual

30 Juli 2025

Wren & Cuff 70's Your Face Fuzz Manual

30 Juli 2025

Advantech WISE-2211 Manual

30 Juli 2025