Dormakaba RCI 3525 Manual


Læs gratis den danske manual til Dormakaba RCI 3525 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Dormakaba RCI 3525, eller vil du spørge andre brugere om produktet?

Side 1/3
INSTALLATION
RCI 3525
ELECTROMECHANICAL SERVER RACK HANDLE
© 2020 dormakaba Canada Inc
www.dormakaba.us • Phone: 1.800.265.6630 • Fax: 1.800.482.9795 • E-mail: sales_RCI@dormakaba.comIS3525
PCN2013
R09-20GR-1
Package Contents
• 3525 Electromechanical Server Rack Handle
• 78.7” (2000 mm) Wire Harness
• M3x25mm Long Mounting Screws (qty 4)
• M3x14mm Long Mounting Screw
• Rotation Limiter - Standard
• Rotation Limiter - Extended (for thicker panels)
• CAM Bolt
• Top Mounting Bracket
• Bottom Mounting Bracket
• IS3525 Installation Instructions
• Keys (qty 3)
Specications
Voltage: 12VDC to 24VDC ( Status LED will blink red if the supply voltage is out of range.)NOTE:
Standby Current: 50mA maximum at 12VDC
Operating Current: 200mA maximum at 12VDC (with no external mechanical load applied to handle)
Operating Transit Time: 1 second maximum ( Power must be present during transit times. If power is removed NOTE:
while the lock slide is moving to the unlock position, then the control input signal must be
asserted again. If power is removed while the lock slide is moving to the lock position, it will
complete it’s cycle when power is restored.)
Electronic Unlock Time: 3 seconds minimum
Alarm Outputs: 100mA/output maximum
Overall Dimensions: 6-3/4" H x 1-1/2" W x 1” D* (170 x 37 x 25mm*)
(* depth from cabinet face)
Tri-Color LED Indicator
Key Cylinder
Handle
2
1. Assemble handle according to the proper handing required.
2. Rotation Limiter and Bottom Mounting bracket determine handing.
3. If existing cam or rod mechanism are installed on original handle
remove and install on new handle. (minimum torque 4Nm)
4. Ensure the proper cutout in the door. (See Fig. 1)
5. Install handle though cutout and install top & bottom mounting
brackets. (Pozidrive with maximum 0.5Nm)
6. Install wiring harness and route to hinge side of door securing in
place to ensure that nothing will bind or catch.
7. Proceed to wiring. (See Fig. 2)
Handle Mounting
Rotation Limiter
Viewed from back.
Handle rotation is counter
clockwise from front.
Bottom Mounting Bracket
Viewed from back.
Key rotation is counter clockwise
from front.
Rotation Limiter
Viewed from back.
Handle rotation is
clockwise from front.
Bottom Mounting Bracket
Viewed from back.
Key rotation is clockwise
from front.
NOTE:
* 1) Cut-out dimensions.
2) Handing is determined by rotation
limiter and bottom mounting bracket.
Fig. 1
select appropriate
Rotation Limiter
CAM
Top Mounting
Bracket
CAM Bolt
M3x14mm Screw
(1 place)
M3x25mm Screw
(4 places)
5.9" *
150mm
1" *
25mm
Bottom
Mounting Bracket


Produkt Specifikationer

Mærke: Dormakaba
Kategori: Ikke kategoriseret
Model: RCI 3525

Har du brug for hjælp?

Hvis du har brug for hjælp til Dormakaba RCI 3525 stil et spørgsmål nedenfor, og andre brugere vil svare dig