Dormakaba RCI F1114 Manual

Dormakaba Ikke kategoriseret RCI F1114

Læs gratis den danske manual til Dormakaba RCI F1114 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Dormakaba RCI F1114, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

INSTRUCTIONS

1. To determine if the Strike Shim positions need adjustment, measure dimension “R” (see Figure 1) from the center to the edge

of the latch. When necessary rearrange Strike Shims according to the chart below. The “shipped as default” positions are

illustrated in Figure 2.

SHIM PLACEMENT CHART

Note: Shims consist of two thin and one thick. Install with the indicated hardware per the appropriate measurement R range.

Fig. 1

I N S T A L L A T I O N

www.rutherfordcontrols.com • Phone: 1.800.265.6630 • fax: 1.800.482.9795 • e-mail: sales@rutherfordcontrols.com

When installing an electric strike on an inactive door of a set of double doors, it can be treated the same as a frame installation in most situations. For

more information contact the Technical Service Department at 1-800-265-6630 or 519-621-7651.

Fire labeled heavy-duty electric strike

F1114

isf1114 Pcn14079

r06/15Gr

Fig. 2

Measurement “R” “S1” Shims “S1” Screws “S2” Shims “S2” Screws

5/16” (8.2mm) or Less None M4 x 10mm 1 thick, 2 thin M4 x 10mm

5/16” - 3/8”, (8.2 - 9.7mm) 1 thin M4 x 10mm 1 thick, 1 thin M4 x 10mm

3/8” - 7/16”, (9.7 - 10.7mm) 1 thick M4 x 10mm 2 thin M4 x 10mm

7/16” - 1/2”, (10.7 - 12.2mm) 1 thick, 1 thin M4 x 14mm 1 thin M4 x 10mm

1/2” - 9/16” (12.2 - 13.7mm) 1 thick, 2 thin M4 x 14mm none none

S1 S2

Shipped as Default

“R” distance

from center to

edge of latch

“R” distance from

center to edge of latch

Deadlock

Trigger

Deadlock

Trigger

Mortise Lock Cylindrical Lock

2. Determine the horizontal centerline.

FOR MORTISE LOCKS: Position the strike against the edge

of the door with the deadlock trigger fully on the strike’s

angled ramp and the latch within the strike cavity. Move

door close to the frame. The horizontal centerline is clearly

molded into the strike’s pry-guard. Transfer onto door frame.

FOR CYLINDRICAL LOCKS: Simply align the center of the

latch with the center of the strike cavity. Move door close

to the frame. The horizontal centerline is clearly molded

into the strike’s pry-guard. Transfer onto door frame.

3. Determine the vertical centerline of the door lock face,

carefully considering any stops or gasket and transfer onto

the door frame.

4. Use the vertical and horizontal centerlines marked on the

drawing below to prepare the door frame for cutting.

5. If required, install the optional “no weld” mounting

tabs.

6. Connect the incoming wiring from the power supply to

the terminal screws on the strike insert. RCI door strikes

are not polarity sensitive although be certain to observe

proper polarity if a suppression diode is required for access

control applications. To meet BHMA A156.31 install the

MOV provided across the red & black power wires.

Install the door strike in the door frame using the screws provided.

8. See Installation Tips on page 3.

I N S T A L L A T I O N

Fire labeled heavy-duty electric strike

F1114

www.rutherfordcontrols.com • Phone: 1.800.265.6630 • fax: 1.800.482.9795 • e-mail: sales@rutherfordcontrols.com

INSTRUCTIONS Cont’d.

In or Out... we make it Easy!®

NOTE: Specifications subject to change without notice.

* Dimension F is measured from face of mounting tab to face of frame.

MEASUREMENT

FRACTIONAL

INCHES

DECIMAL

INCHES

METRIC

A 1-1/4” 1.25 31.8

/B 4-7 8” 4.87 123.8

C 3-3/8” 3.38 85.7

D 1-1/2” 1.50 38.1

/E 3 8” 0.38 9.5

/F 1 8” 0.13 3.2

G 1-11/16” 1.69 42.9

4-1/K 8” 4.13 104.8

M 12-24 N/A N/A

F1114

Vertical Centre Line of Door

Lock and Mounting Face Plate

Fig. 3

Produkt Specifikationer

Mærke:	Dormakaba
Kategori:	Ikke kategoriseret
Model:	RCI F1114

Har du brug for hjælp?

Hvis du har brug for hjælp til Dormakaba RCI F1114 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Dormakaba Manualer

Dormakaba 3513-DM Manual

29 Juni 2025

Dormakaba Keyscan EC1500 Manual

21 August 2024

Dormakaba RCI S2500A Manual

21 August 2024

Dormakaba EAC Manual

21 August 2024

Dormakaba CLM9000 Manual

21 August 2024

Dormakaba DKX Type III Manual

21 August 2024

Dormakaba 9800 Manual

21 August 2024

Dormakaba HSW-GP Manual

21 August 2024

Dormakaba DKX-10 Manual

21 August 2024

Dormakaba Confidant RFID Kit 1 Manual

21 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Tripp Lite U339-001-FLAT Manual

31 Juli 2025

Tripp Lite IBLOK2-0 Manual

31 Juli 2025

Tripp Lite TR-6FM Manual

31 Juli 2025

L.R.Baggs Element Active System Manual

31 Juli 2025

Tripp Lite Protect It! TLP310USBCW Manual

31 Juli 2025

Tripp Lite PR25 Manual

31 Juli 2025

SolidDrive SD-1G Manual

31 Juli 2025

Tripp Lite PR7 Manual

30 Juli 2025

Wren & Cuff 70's Your Face Fuzz Manual

30 Juli 2025

Advantech WISE-2211 Manual

30 Juli 2025