Dremel 300series Manual

Dremel Slibemaskine 300series

Læs gratis den danske manual til Dremel 300series (72 sider) i kategorien Slibemaskine. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Dremel 300series, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/72

Instructional Safety

Manual

300 Series

High Speed Rotary Tool

1-800-437-3635

http://www.dremel.com

Dremel brand products are manufactured and sold by the

Dremel Division of Robert Bosch Tool Corporation

DM 2610925781 5-05.qxd 5/12/05 10:31 PM Page 1

Read all instructions. Failure to follow all instructions listed below

may result in electric shock, fire and/or serious injury. The term “power

tool” in all of the warnings listed below refers to your mains-operated (corded) power tool

or battery-operated (cordless) power tool.

SAVE THESE INSTRUCTIONS

Work area safety

Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power

tools create sparks which may ignite the

dust or fumes.

Keep children and bystanders away

while operating a power tool. Distractions

can cause you to lose control.

Electrical safety

Power tool plugs must match the outlet.

Never modify the plug in any way. Do not

use any adapter plugs with earthed

(grounded) power tools. Unmodified plugs

and matching outlets will reduce risk of elec-

tric shock.

Avoid body contact with earthed or

grounded surfaces such as pipes, radia-

tors, ranges and refrigerators. There is an

increased risk of electric shock if your body

is earthed or grounded.

Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

Do not abuse the cord. Never use the

cord for carrying, pulling or unplugging

the power tool. Keep cord away from

heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the

risk of electric shock.

When operating a power tool outdoors,

use an extension cord suitable for out-

door use. Use of a cord suitable for outdoor

use reduces the risk of electric shock.

Do not use AC only rated tools with a DC

power supply. While the tool may appear

to work, the electrical components of the AC

rated tool are likely to fail and create a haz-

ard to the operator.

If operating the power tool in damp loca-

tions is unavoidable a Ground Fault

Circuit Interrupter (GFCI) must be used

to supply the power to your tool. GFCI

and personal protection devices like electri-

cian’s rubber gloves and footwear will fur-

ther enhance your personal safety.

Personal safety

Stay alert, watch what you are doing and

use common sense when operating a

power tool. Do not use a power tool

while you are tired or under the influence

of drugs, alcohol or medication. A

moment of inattention while operating

power tools may result in serious personal

injury.

Use safety equipment. Always wear eye

protection. Safety equipment such as dust

mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate con-

ditions will reduce personal injuries.

Avoid accidental starting. Ensure the

switch is in the off-position before plug-

ging in. Carrying power tools with your fin-

ger on the switch or plugging in power tools

that have the switch on invites accidents.

Remove any adjusting key or wrench

before turning the power tool on. A

wrench or a key left attached to a rotating

part of the power tool may result in person-

al injury.

Do not overreach. Keep proper footing

and balance at all times. This enables bet-

ter control of the power tool in unexpected

situations.

Dress properly. Do not wear loose cloth-

ing or jewelry. Keep your hair, clothing

and gloves away from moving parts.

Loose clothes, jewelry or long hair can be

caught in moving parts.

If devices are provided for the connec-

tion of dust extraction and collection

facilities, ensure these are connected

and properly used. Use of these devices

can reduce dust-related hazards.

WARNING

GENERAL SAFETY RULES

DM 2610925781 5-05.qxd 5/12/05 10:31 PM Page 2

Produkt Specifikationer

Mærke:	Dremel
Kategori:	Slibemaskine
Model:	300series

Har du brug for hjælp?

Hvis du har brug for hjælp til Dremel 300series stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Slibemaskine Dremel Manualer

Dremel 400seriesXPR Manual

16 September 2024

Dremel 780 Manual

14 August 2024

Dremel 10.8V Lithium-ion Manual

7 August 2024

Dremel 300series Manual

4 August 2024

Dremel 1100 Manual

18 Juli 2024

Slibemaskine Manualer

Nyeste Slibemaskine Manualer

Bosch GWS 30-180 PB Professional Manual

5 Februar 2025

Parkside PEXS 270 A1 Manual

13 Januar 2025

Makita 9562CVR Manual

12 Januar 2025

Chicago Pneumatic CP7255 Manual

11 Januar 2025

Bosch GWS 18V-8 Professional Manual

5 Januar 2025

DeWalt DWE4115 Manual

30 December 2025

Black Decker 4292 Manual

30 December 2025

Powerplus POWX06250 Manual

30 December 2025

Hazet 9032M-36 Manual

30 December 2025

Alpha Tools WS 230-3 Manual

28 December 2024