E-Image EG06A2 Manual

E-Image Kamerastativ EG06A2

Læs nedenfor 📖 manual på dansk for E-Image EG06A2 (18 sider) i kategorien Kamerastativ. Denne guide var nyttig for 36 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/18

User s Manual

PREFACE FLUID HEAD

Thank you for purchasing E-IMAGE professional heads and

tripods. This manual is an important tool for personnel who

operate and maintain this equipment. Inside, you will

find detailed information about E-I tripods and MAGE

heads, and their proper use. We highly recommend you read

the manual carefully and familiarize yourself with each

section. There is also a section about safety and

maintenance to help you keep your equipment in perfect

condition and extend its life.

Please keep this manual for reference while operating and

maintaining your equipment.

The E- G Series is an upgraded generation IMAGE ENTING

of E-Image fluid heads with international

influences, innovative designs, and more advanced

functions. We refined the counterbalance and drag

systems, making balancing faster and simpler. This new

series can handle a wider payload range, from 8.8 to 55

pounds, and works with many different styles of camera. Pan

handles with rubber grips are included for precise camera

movements and are extendable in some models. Each

head also has an installed bubble level, and advanced

heads have an LED light installed for making

adjustments in the dark.

CONTENTS

Fluid H Sead pecifications.………………….......... 1

Parts(GH03)……………………………….................. 2

Set up & Use..............……………………….......... 3-5

Install ……………...................... 3ing the Pan Handle. .

Remov …....................... 3ing the Quick Release Plate

Adjusting ilt osition………………..........................T P 4

Adjusting an P Position………………......................... 4

…......................... 4Drag Adjustment for Pan and Tilt..

Mounting the amera………….................................C 5

Extra functions of late…... 6the GP1 Quick Release P

Parts(GH06-GH25) ………………………………......7

Set p & Use(GH06-GH25U）………………….. 8-12

Installing ………………................... 8the Pan Handle..

………………...............Mounting to a Tripod............. 8

………................ 8Removing the Quick Release Plate

Mounting Camcorder…… ………....................... .. 9a . ..

Mounting amera…… ………….....................a C ... 9-10

Adjusting ounterbalance ............ ...... 11the C Settings . .

Adjusting ……………………………….11the Tilt Drag..

Adjusting ………………………………12the Pan Drag.

Chang (GH08/08L/10/10L )… …...13 ing the Batteries ..

10.

Chang (GH15,GH25)……… ……14ing the Batteries ..

CONTENTS

Tripod S specification ………………………………………….. 15-16

Parts(AT7402A) ……………………………………………...........17

Use AT7402A ……………………………………………...........18-19

1. ……………….......................18Releasing and Locking the Legs.....

Adjusting ripod eight………… ………………..........................18T H ..

Anti- ubber eet……………………………............................18Slip R F

4. ………………............................Folding the Tripod for Storage... 19

Parts(GA/GC101) ……………………………………....................20

Parts(GA/GC102) ……………………………………................ . . . 21

Parts(GA/GC751 GA/GC752) ………………………............. . . 22

Use(GA/GC751 GA/GC752 GA/GC101 GA/GC102) ….23-24

1. ………………....................... 23Releasing and Locking the Legs....

………………....................... 23Adjusting the Mid-Level Spreader.. .

3. Adjust round preader… …………....................... 23ing the G S ..........

………………........................ 24Removing the Mid-Level Spreader.

Install ……………............. 24ing and Removing a Ground Spreader

F …………………............................ 24olding the Tripod for Storage

Maintenance…………………………………………................. . . . 25

Notice & Warnings s ………………............................................ 26

Head No .

Fluid Head

E IMAGE No.-

G H

1 2

GH03 75mm 1kg 4kg +90°～-60°

-40℃ 80℃～

GH05 75mm 1.7kg 3-8kg +90°～-45°

-30℃ 60℃～

0-2

GH06 75mm 1.6kg 6kg +90°～-60°

-40℃ 80℃～

0-50-3

GH08 75mm 1.7kg 8kg +90°～-60°

-40℃ 80℃～

0-6

GH10 75mm 1.9kg 10kg +90°～-60°

-40℃ 80℃～

1-7

0-3

GH10L

100mm

2kg 10kg +90°～-60°

-40℃ 80℃～

1-70-3

100mm

3.7kg 15kg + ～-80° 75°

-40℃ 80℃～

0-90-5GH15

100mm

+90°～-80°

-40℃ 80℃～

1-150-7GH25 4kg 25kg

100mm

+90°～-60°

-30℃ 60℃～

GH20 3.8kg 20kg 0-8

SPECIFICATIONS

Model

.No

Bowl

size

Net

weight

Load

capacity

Grades of

drag

Counterbalance

Tilt range Temperature

range

Variable (Tilt) Fixed

Fixed

Bowl

L Kocking nob

PARTS(GH03)

Quick 5elease late 3

4XLFN5HOHDVH3ODWH/RFNLQJ.QRE

Quick Release Plate Release Button

Pan Handle Locking Thumb Screw

Pan Handle

Pan Handle Mounting Rosette

Tilt L Kocking nob

Tilt rag djust nob D A ment K

GH01 65mm 1 kg kg.3 5 Fixed Fixed + ～-80° 6 °5

- 0℃3 ~60℃

loose

lock

loose

lock

loose

lock

loose

ReduceIncrease

1.Install Pan Handle

Place the pan handle E in the desired position on the pan handle mounting

rosette F, then secure it by tightening pan handle locking thumb screw D.

2. Removing the Quick Release Plate

Loosen the quick release plate locking knob B, then press the quick release

plate release button C while sliding the plate A towards the back of the head.

5.Tilt rag djustmentD A

Increase tilt drag by turning the tilt drag adjustment knob H clockwise

(as if tightening a screw). Reduce the tilt drag by turning the knob H

counter-clockwise (as if loosening a screw).

3.Adjusting ilt ositionT P

Loosen the tilt locking knob G to change tilt position. Tighten the knob to

lock the tilt position.

4.Adjusting an ositionP P

Loosen the pan locking knob J to change the pan position. Tighten the

knob to lock the pan position.

SET UP & USE (GH03)

3 4

8.Extra unctions of GH03, GH06 plateF

The GH03 and GH06 fluid heads have a special clip that allows the GP1

quick release plate to be pressed down into place. Press one side of the

plate against the normal side of the quick release plate track, then press

the other side down against the spring clip until the clip clicks, and the

plate is secured in place.

6. To mount a camera or camcorder, remove the quick release plate

from the tripod head. Attach the plate to the camera using the included

¼”-20 or 3/6”-16 screw. Take care not to over-tighten the screw.

7. With the pan and tilt locked on the head, slide the camera plate onto

the head, moving from the back to the front of the head, until the locking

button C clicks. Balance the camera by placing the camera’s center of

gravity as close to the center of the head as possible, then tighten quick

release plate lock B.

MOUNTING THE CAMERA EXTRA FUNCTIONS OF GH03,GH06 PLATE

5 6

MJRL

loose

lock

loose

lock

loose lock

lock

loose

1. Installing Pan Handle

Place the pan handle A in the desired position on the rosette M and tighten the locking

thumb screw C, making sure the locking washer T is in place between the handle and

rosette. Loosen the length adjustment knob B on the pan handle to adjust the length of

the handle. Length adjustment is only available on GB2 and GB3 pan handles.

2. Installing the Fluid Head on a Tripod

Adjust the tripod to the desired height, and place the ball of the head into the bowl of

the tripod. Level the head using the bubble level R, and secure the bowl locking

knob F onto the bottom of the head on the underside of the tripod bowl.

3. Removing uick elease late the Q R P

Loosen locking knob E and hold the release button G while sliding the plate toward

the rear of the head.

SET UP & USE(GH06-GH25)PARTS(GH06~GH25)

7 8

A Pan Handle

Pan Handle Length Adjustment Knob

Pan Handle Locking Thumb Screw

Quick Release Plate Camera Locking Screw

Quick Release Plate Locking Knob

Bowl Locking Knob

Quick Release Plate Release Button

Tilt Locking Knob

Counterbalance Adjustment Dial

Tilt Drag Adjustment Dial

Pan Locking Knob

Pan Drag Adjustment Dial

Pan Handle Mounting Rosette

Bubble Level LED Power Button

Quick Release Plate

Bubble Level

Rubber Washer

Pan Handle Locking Washer

MOUTING THE CAMCORDER VIA ADAPTER

4.Mounting a Large Camera with the PS-C VCT-14 Adapter

4.1 Attach the quick release plate to the bottom of the VCT-14 mounting

adapter (part no. PS-C) using the ¼”-20 or 3/8”-16 screws included with

the head. Take care not to over-tighten the screws when mounting the

plate.

4.2 Slide the quick release plate onto the tripod head. The plate release

button will click when it is in place.

4.3 Make sure the head’s pan and tilt axis are locked, and attach the

camera’s VCT-14 wedge to the PS-C adapter. It will click when it is

locked in place. Loosen the quick release plate lock and adjust the

position of the camera to find the desired center of balance.

5.2 Make sure the head’s pan and tilt axis are locked, then slide the

quick release plate onto the head, moving from the rear to the front. The

plate release button C will click when the plate is in place. Slide the plate

along the track until you find the center of balance, then lock the plate in

place with the locking knob E.

MOUNTING THE CAMERA

910

5.Mou ting the ameranC to the Quick Release Plate

5.1 Attach the quick release plate to the bottom of the camera using the

included ¼”-20 or 3/8”-16 screws. Take care not to over-tighten the

screw when mounting the camera.

lock loose

6.Adjusting ounterbalanceC Settings

Loosen the tilt locking knob H and hold the head steady with the pan

handle. Turn the counterbalance dial I to a setting that allows the camera

to remain in position without operator assistance. Lower numbers mean

less tension; higher numbers use more tension to balance loads.

lock loose

7. Adjusting T Dilt rag

Loosen the tilt locking knob H. Turn the tilt drag adjustment dial J to the

desired setting. Lower numbers give less resistance; higher numbers

offer more resistance.

lock loose

8. Adjusting an ragP D

Loosen the pan locking knob K. Use the pan drag adjustment dial L to set

the desired amount of pan drag. Lower numbers give less drag; higher

numbers offer more resistance.

ADJUSTING COUNTERBALANCE & DRAG ADJUSTING PAN DRAG

11 12

9.Changing the Battery on the Bubble Level LED Light

(GH08, GH08L ,GH10,GH10L)

9.1 Test the light by pressing button N to turn it on. If the light turns on,

the batteries are still good. The light will turn itself off automatically after

25 seconds.

9.2 To change the batteries, begin by reducing tilt drag and counterbalance to

their lowest settings and make sure the tilt axis is unlocked. Tilt the head all the

way back to expose the battery compartment, and lock the head in place with

the compartment exposed.

9.3 Remove the battery compartment cover with a flat head screwdriver to

access the battery chamber. The GH08, GH08L, GH10, and GH10L heads

use 2x LR41 button batteries. Once the batteries are replaced screw on the

battery cover and carefully release the tilt lock to return the head to its

normal position.

10. Chang atteries (GH15,GH25)ing B

10.1 Check the battery using the LED activation button N

10.2 If the battery must be changed, reduce tilt drag and counterbalance to

their lowest settings and unlock the tilt axis. Tilt the head all the way back to

expose the battery chamber, and lock the tilt axis.

10.3 Use a Phillips head screwdriver to remove the battery cover. The GH15

and GH25 heads use AAA style batteries. Replace the old batteries with two

new ones, and re-install the battery cover. Carefully unlock the tilt axis to

restore the head to its normal position.

CHANGE BATTERY OF ILLUMINATED LEVELING BUBBLE (GH15 GH25)CHANGE BATTERY OF ILLUMINATED LEVELING BUBBLE (GH08 GH08L GH10 GH10L)

13 14

65mm

75mm

AT7402B650-1510mm 40kg3 3kg.

695mm

GA751 780-1380mm 820mm 40kg2.9kg

GC751 780-1380mm 820mm 40kg2.6kg

GA752 630-1570mm 720mm 40kg3.5kg

GC752 75mm 630-1570mm 720mm 40kg3.2kg

GA101 100mm 790-1400mm 845mm 60kg4.4kg

GC101 100mm

100mm

790-1400mm 845mm 60kg3.7kg

GA102 470-1600mm 730mm 60kg4.9kg

GC102 470-1600mm 730mm 60kg4.4kg

E IMAGE No.-

TRIPODSSPECIFICATIONS

Model No. Bowl

Size Descrition Height Range Transport

length Weight

Payload

Material

Bowl Size

Section

Two stage

Aluminum

Single stage

Aluminum

Single stage

carbon fiber

Two stage

carbon fiber

Two stage

Aluminum

Single stage

Aluminum

Single stage

carbon fiber

Two stage

Aluminum

Two stage

carbon fiber

The E-IMAGE GENTING series is a new generation

of E-IMAGE tripods. These tripod legs are all made of

high-grade aluminum or carbon fiber materials. The

newly designed lock system and patented locking

mechanisms provide smooth, quick, and secure

locking and unlocking. Equipped with standard 65mm,

75mm, and 100mm bowl systems, E-IMAGE legs will

work with any standard video heads. Each tripod can

be fitted with mid-level and/or ground spreaders for

added stability, or paired with an assortment of dollies

for mobility. These tripods are compact when closed,

and easy to transport with an assortment of available

carrying cases.

15 16

Bowl aseB

Leg ubeT

Locking nobK

Retractable asy ookE H

Mid spreader-Level

Anti-Slip Rubber Pad (Part no. F3)

Rubber Foot Securing Tab

Spiked Tripod Foot

1.Lock and Unlock Leg Stages

To Loosen: Turn lock C counter-clockwise

To Lock: Turn lock clockwise

෭ࣅ

lock

loose

PARTS(AT7402 )B

Special Note The spiked foot is used for shooting outdoors.:

Special Note: It is a best practice to unlock, adjust, and re-lock the

tripod legs before the legs are unfolded.

2.Adjusting ripod eightT H

Loosen the locking knobs on the leg or legs needing adjustment, set

them to the desired height, then re-lock the leg stages.

3.Anti li ubber eet-S p R F

To remove the rubber feet, pull the foot-securing tab J up and over the

lip of the foot, then lift the foot off of the tab.

USE AT7402B

17 18

I H

4. Folding ripodT

a:a: Loosen the locking knobs for all extended leg stages and reduce them

to their minimum length, then re-lock all of the knobs

USE AT7402BPARTS(GA101/GC101)

19 20

b: Holding the tripod by the bowl, lift up on the center of the mid-level

spreader G and fold the legs together. Pull out the retractable easy hook D,

wrap it around the legs, and secure the hook to a leg tube to secure the legs.

A Bowl aseB

B Leg ubeT

Patented Leg Lock (Mono-Lock) for Leg Stages

Retractable asy ook E H

Ground Spreader Locking Knob

Ground Spreader Pull Ring

Ground Spreader

Spiked Tripod Foot

Anti-Slip Rubber Foot

Rubber Foot Securing Tab

PARTS(GA/GC751 GA/GC752)PARTS(GA102/GC102)

21 22

Bowl Base

Leg Tube

Patented Leg Lock (Mono-Lock) for Leg Stages

Retractable Easy Hook

Ground Spreader Locking Knob

Ground Spreader Pull Ring

Ground Spreader

Spiked Tripod Foot

Anti-Slip Rubber Foot

Rubber Foot Securing Tab

Bowl Base

Leg Tube

Patented Leg Lock (Mono-Lock) for Leg Stages

Retractable Easy Hook

Mid-Level Spreader Locking Knob

Mid-Level Spreader Pull Ring

Mid-Level Spreader

Spiked Tripod Foot

Anti-Slip Rubber Foots

Rubber Foot Securing Tab

Mid-Level Spreader Removal Pin

J J

lock

loose

1.Loosening and Locking Tripod Legs

To Loosen: Turn locking knob C counter-clockwise

To Tighten: Turn locking knob C clockwise

Special Note: It is a best practice to unlock, adjust, and re-lock the

tripod legs before the legs are unfolded.

2.Adjust id preadering the M -Level S

To make adjustments to the mid-level spreader, loosen the locking knob E

and reposition the leg attached to that section of the spreader. When the

adjustment is made, tighten the knob to re-secure the spreader.

3.Adjusting the Ground Spreader

To make adjustments to the ground spreader, loosen the locking knob E

and reposition the leg attached to that section of the spreader. When the

adjustment is made, tighten the knob to re-secure the spreader.

4. 4. To remove the mid-level spreader, remove the retaining pin K

located where the spreader attaches to the leg.

5. Installing a Ground Spreader

To install the ground spreader, remove the rubber tripod feet

using the pull-tab J, placed the spiked tripod feet on the ground

spreader, and secure them with the rubber tab J on the spreader.

6. Folding ripod the T

a. Loosen the leg locks and collapse each leg to its minimum length, then

lock the knobs.

b. Unlock and reduce the all attached spreaders to their minimum size.

c. Securing the tripod by the bowl, pull up on the spreader pull ring F and fold

the legs, then pull out the easy hook D and wrap it around the legs,

securing the hook to a leg tube.

USE(GA/GC751 GA/GC752 GA/GC101 GA/GC102) USE(GA/GC751 GA/GC752 GA/GC101 GA/GC102)

23 24

Daily maintenance:

Storage and

Storage and Storage and ransport:

ransport:

ransport:ransport:T

When head is not in use, loosen all locks and reduce drag

and counterbalance to minimum settings.

When tripod is not in use, do not store it vertically to avoid it

falling and being broken.

When tripod is not in use or is being transported, keep it safe

in the carrying bag.

Inspection of Functions:

Check the recommended payload and verify locks are

functional before mounting anything on a tripod or head to

avoid accidental damage.

To prolong the life of a tripod and head, check and adjust

locks, dials, and hardware on a regular basis.

Cleaning

Cleaning Cleaning &

Storage:

Use a lint-free cloth to clean tripods, heads, and their

individual components.

Keep the tripod and head in a carrying case when they are

not in use.

Use a semi-stiff brush to remove debris and grime that cannot

be easily wiped away.

Always engage safety devices like locks and easy hooks when

applicable.

Do not use E-IMAGE tripods and fluid heads at temperatures less

than -30°C or more than 60°C.

Clean with a mild detergent and soft , a semi-stiff brush, or a cloth

vacuum. Check for dust, sand, and other debris in all moving parts.

Dry after use in wet conditions.

Important: Product in this manual are not recommended for use s

in seawater.

If you have any questions during use, consult this manual or

contact your local distributor for the fastest service.

In the event that an E-IMAGE product proves defective, contact the

nearest authorized E-IMAGE service agent or distributor

Maintenance Notice & Warning

25 26

Produkt Specifikationer

Mærke:	E-Image
Kategori:	Kamerastativ
Model:	EG06A2

Har du brug for hjælp?

Hvis du har brug for hjælp til E-Image EG06A2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Kamerastativ E-Image Manualer

E-Image EG03A2 Manual

5 September 2024

E-Image GA752 Manual

5 September 2024

E-Image GH03 Manual

5 September 2024

E-Image GH06 Manual

5 September 2024

E-Image EG06A2 Manual

5 September 2024

E-Image EG10A2 Manual

5 September 2024

E-Image GC102 Manual

5 September 2024

E-Image GH15 Manual

5 September 2024

E-Image EG03TT Manual

4 September 2024

Kamerastativ Manualer

Nyeste Kamerastativ Manualer

Rollei C5i Manual

9 April 2025

Peak Design Travel Tripod Carbon Manual

9 April 2025

Godox Battery Grip BG02 Manual

8 April 2025

Leofoto Ranger RF-224C Manual

3 April 2025

Leofoto Ranger RF-324C Manual

3 April 2025

Leofoto Urban RF-284CT Manual

3 April 2025

3 April 2025

3 April 2025

3 April 2025

1 April 2025