Eartec EPak Manual

Eartec Ikke kategoriseret EPak

Læs gratis den danske manual til Eartec EPak (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Eartec EPak, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
Safety
1. To prevent possible hearing damage, do not listen at high volume levels for long periods.
2. Risk of explosion if battery is replaced by an incorrect type, dispose of battery according to
the instruction.
3. Recycle your products
The WEEE logo (shown at right) appears on the product to indicate that this product must not
be disposed of or dumped with your other household wastes. You are liable to dispose of all
your electronic or electrical waste equipment by transporting to an appropriate collection
point for recycling of such hazardous waste.
limits set forth for an uncontrolled environment.
IC Warning:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of
the device.
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This device and its antenna(s) must not be co-located or operating in conjunction
with any other antenna or transmitter.
FCC Notice
This device complies with Part 15 of FCC rules. Operation is subject to the following 2
conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation. Changes
or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Warranty
Eartec items are warrantied against defects in material and/or factory workmanship
for a set period from the date of purchase. Standard repairs due to misuse or wear
and tear, as well as replacement parts including but not limited to batteries, padding,
USB cable, etc. are excluded. Shipping to is at customer’s expense, Eartec Eartec will
pay for return ground shipping if the product warranty applies to the repair. Call for
details.
Shipping
Prior to returning your headset for warranty or service you must call Eartec for an RA
(return authorization) number: 1.800.399.5994.
General Service
All repair work will be performed for the cost of replacement parts and return
shipping from the Eartec factory.
Service / Eartec www.eartec.com
145 Dean Knauss Drive 1.800.399.5994
Narragansett, RI. 02882
The
Communicate in Total Comfort
Full Duplex Wireless
IMPORTANT
E-Pak intercoms include one MAIN transceiver.
When the MAIN unit is ON all radios in the system will link automatically.
Push battery door up,
then slide out to open.
Red = Charging
Green = Charged
Charge time appx. 3 hours
Programming
Button / Blue LED
Green LED
Power Button
Volume Up / Down
GREEN LED - Power & System Status Indicator
The green LED serves a dual purpose:
A flashing green LED means that the power is on, but the E-Pak is not connected to any
other transceiver.
A solid green LED indicates the E-Pak is powered on and is also sending & receiving
wireless signals with one or more E-Pak radios.
BLUE LED - -Pairing Wireless Headsets to the E Pak
Linking Previously Paired Headsets
Each wireless headset is factory programmed to an individual E-Pak. The headsets and
transceivers are numbered accordingly.
Upon start Pak radios enter search mode (indicated by flashing blue Programming - -up E
Button). When the radio “finds” the headset to which it has been previously paired the
LED turns solid blue indicating connection.
If the radio fails to link with its previously paired headset within 60 seconds the blue LED
turns off.
Linking a New Headset
When a wireless headset is not paired the blue LED is dark.
To connect a headset first set the E-Pak radio to programming mode by holding the
programming button until the blue LED illuminates and flashes rapidly.
Next, set the selected headset to pairing mode (alternating red & blue LEDs).
When the radio and headset successfully connect, the E-Pak blue LED turns solid.
RED LED - Microphone Mute Button
The microphone mute feature is controlled by the tactile button located on top of the
radio cabinet, labelled MIC.
Pressing the Mic button illuminates the red LED indicating the microphone signal is
muted.
Pressing the button again reactivates the mic gain and the red LED light turns off.
Red LED = Mute
Jack accommodates
Eartec wired headsets.
Battery Charger Headset Jack
Battery Compartment

Produkt Specifikationer

Mærke: Eartec
Kategori: Ikke kategoriseret
Model: EPak

Har du brug for hjælp?

Hvis du har brug for hjælp til Eartec EPak stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Eartec Manualer

Eartec

Eartec Evade Manual

10 December 2024
Eartec

Eartec EVADE XTreme Manual

10 December 2024
Eartec

Eartec EPak Manual

10 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Miele

Miele WTV 511 Manual

10 Oktober 2025
Miele

Miele WTV 601 Manual

10 Oktober 2025
Miele

Miele GaLa-S Manual

10 Oktober 2025
TOA

TOA HS-150B Manual

10 Oktober 2025
Oras

Oras Saga 3970 Manual

10 Oktober 2025
TOA

TOA AT-4030B-EB Manual

10 Oktober 2025
TOA

TOA VX-030DA Manual

10 Oktober 2025
TOA

TOA RS-481 Manual

10 Oktober 2025
TOA

TOA AT-4200B-EB Manual

10 Oktober 2025
Xerox

Xerox DocuShare Manual

10 Oktober 2025