Eaton Powerware 9140 10kVA HW Manual

Eaton Uafbrydelig strømforsyning (UPS) Powerware 9140 10kVA HW

Læs gratis den danske manual til Eaton Powerware 9140 10kVA HW (110 sider) i kategorien Uafbrydelig strømforsyning (UPS). Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Eaton Powerware 9140 10kVA HW, eller vil du spørge andre brugere om produktet?

Side 1/110
Powerware Series
Eaton 9140 UPS
7.5–10 kVA
User's Guide
®
Class A EMC Statements
FCC Part 15
NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
ICES-003
This Class A Interference Causing Equipment meets all requirements of the Canadian Interference Causing
Equipment Regulations ICES‐003.
Cet appareil numérique de la classe A respecte toutes les exigences du Reglement sur le matériel brouilleur du
Canada.
EN 50091-2
Some configurations are classified under EN 50091-2 as “Class‐A UPS for Unrestricted Sales Distribution.” For
these configurations, the following applies:
WARNING This is a Class A‐UPS Product. In a domestic environment, this product may cause radio interference, in
which case, the user may be required to take additional measures.
Eaton, Powerware, ABM, LanSafe, and X-Slot are registered trademarks and ConnectUPS is a trademark of
Eaton Corporation or its subsidiaries and affiliates. Greenlee is a registered trademark of Greenlee Textron.
Microsoft and Windows are registered trademarks of Microsoft Corporation. Modbus is a registered trademark of
Schneider Automation. National Electrical Code and NEC are registered trademarks of National Fire Protection
Association, Inc. All other trademarks are property of their respective companies.
ECopyright 2006–2010 Eaton Corporation, Raleigh, NC, USA. All rights reserved. No part of this document may be
reproduced in any way without the express written approval of Eaton Corporation.


Produkt Specifikationer

Mærke: Eaton
Kategori: Uafbrydelig strømforsyning (UPS)
Model: Powerware 9140 10kVA HW
Bredde: 430 mm
Dybde: 760 mm
Højde: 263 mm
Vægt: 115000 g
Produktfarve: Sort
Skærmtype: LCD
Formfaktor: Reolbeslag
Opbevaringstemperatur (T-T): -20 - 50 °C
Antal USB 2.0-porte: 1
Driftstemperatur (T-T): 0 - 40 °C
Støjniveau: 55 dB
Udgangseffekt: 8000 W
Certificering: IEC/EN 62040-2, CE, FCC, VCCI, C-tick
LED-indikatorer: Ja
Driftshøjde: 0 - 3000 m
Ikke-drift højde: 0 - 15000 m
Indgangsfrekvens: 50/60 Hz
RS-232-porte: 1
Effektivitet: 90 %
Strømstik: Terminal
Sikkerhed: IEC/EN 62040-1-1, CE, UL, cULus, NOM, TUV
AC udgange, antal: 5 AC stikkontakt(er)
AC stikkontakt typer: C13 coupler, C19 coupler, Terminal
Indgående driftsspænding (maks.): 288 V
Output strømkapacitet (VA): 10 kVA
Indgående driftsspænding (min.): 174 V
Udgangs driftsspænding (min.): 200 V
Udgangs driftsspænding (maks.): 240 V
Typisk backup tid ved halv styrke: - min.
Typisk backup tid ved fuld styrke: - min.
THD, indgående strøm: 5 %
Indgående strømfaktor: 0.99

Har du brug for hjælp?

Hvis du har brug for hjælp til Eaton Powerware 9140 10kVA HW stil et spørgsmål nedenfor, og andre brugere vil svare dig