Eclipse CD5030 Manual

Eclipse Bilradio CD5030

Læs gratis den danske manual til Eclipse CD5030 (113 sider) i kategorien Bilradio. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Eclipse CD5030, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/113
Owner's Manual / Manual del propietario / Manuel de I'utilisateur
Nous vous remercions d'avoir acheté ce récepteur.
Veuillez lire ce manuel afin d'utiliser votre appareil correctement.
Nous vous recommandons de conserver ce manuel
dans un endroit sûr afin de pouvoir le consulter ultérieurement.
Tras adquirir este receptor rogamos lea atentamente su
manual para una correcta utilizaci
ó
n del equipo.
Igualmente, guarde dicho manual en un lugar adecuado para poder
recurrir a él en caso de futuras consultas.
We appreciate your purchase of this receiver.
Please read through this manual for correct operation.
We suggest that after reading it you keep this manual
in a safe place for future reference.
CD/USB Multi-Source Receiver / Built-in A2DP Bluetooth
wireless technology
CD5030
2
For your safety in using the CD5030
For your safety in using the CD5030
For your safet y in using the CD5 030
Warnings and caution signs, illustrated below, are posted throughout this manual as well as on the
CD5030. They show safe and correct ways to handle the product so as to prevent personal injury to
you, others and to avoid property damage.
Before reading through the manual, take time to read through and learn the important information listed
in this section.
Please read all materials such as manuals and warranties that have come with the product.
ECLIPSE will not be held liable for unsatisfactory product performance due to failure to follow these
instructions.
Warning
This "Warning" sign indicates a situation in which incorrect
handling or disregard of this sign might result in death or
serious personal injury.
Caution
This "Caution" sign indicates a situation in which incorrect
handling or disregard of this sign might result in personal
injury or may result solely in damage to property.
WARNING
1
2
● Do not modify this system for use other than that specified herein. Also, do not deviate
from the installation procedures described herein; ECLIPSE will not be held liable for
damages including, but not limited to serious injury, death or property damage resulting
from installations that enable unintended operation.
● This main unit requires 12 V DC and should only be installed in a vehicle with a 12 V
negative ground electrical system. Any other installation may cause a fire or other severe
damage to the main unit and the vehicle.
● Never install this main unit where it will interfere with safe operation of the vehicle. Never
block the drivers' view. Do not install main unit where it may interfere with operation of the
brakes, the steering or any safety equipment, including seat belts and air bags.
● Before drilling holes in a vehicle for installation, you must confirm the locations of pipes,
tanks, electrical wiring, and other vehicle systems and components to ensure that there will
be no interference or contact. In addition, you must also apply rust prevention and leak
prevention measures at the drilling area. Otherwise, fire or electric shock could occur.
● When installing main unit do not remove or alter existing vehicle fasteners, including nuts,
bolts, screws, clips, and fittings. Never detach, move or alter existing vehicle wiring,
including electrical grounds and straps. Alteration of existing vehicle components may
make vehicle unsafe to operate.
● Before installation, remove the negative (-) battery terminal to prevent shocks, electrical
arcing, fires, and damage to vehicle wiring and the main unit you are installing.
● Secure wiring with tape or plastic ties so that wires do not interfere with vehicle operation,
including brake pedal, gear shifter and steering. Position wires so that they will not be
rubbed, abraded, or damaged by moving vehicle components, including power seats.
● To avoid main unit and vehicle damage, including fire, never supply power to the installed
main unit in a way which will overload the capacity of an existing vehicle circuit. Never
leave a power supply wire or connection uninsulated. Always install supplied fuses, circuit
breakers, and relays.

Produkt Specifikationer

Mærke: Eclipse
Kategori: Bilradio
Model: CD5030

Har du brug for hjælp?

Hvis du har brug for hjælp til Eclipse CD5030 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Bilradio Eclipse Manualer

Eclipse

Eclipse CD3200 Manual

9 September 2025
Eclipse

Eclipse CD7200 mkII Manual

9 September 2025
Eclipse

Eclipse CD8455 Manual

9 September 2025
Eclipse

Eclipse CD5435 Manual

30 August 2024
Eclipse

Eclipse CD5030 Manual

30 August 2024
Eclipse

Eclipse CD1200 Manual

30 August 2024

Bilradio Manualer

Nyeste Bilradio Manualer

Varta

Varta V-AVM650D Manual

14 September 2025
Elta

Elta 7173N2 Manual

14 September 2025
Sony

Sony MEX-N5100BT Manual

13 September 2025
Philips

Philips CarStudio CE133 Manual

12 September 2025
JVC

JVC KW-M695DBW Manual

5 September 2025
JVC

JVC KW-M595DBT Manual

4 September 2025
Panasonic

Panasonic CQ-RD95 Manual

28 August 2025
Sony

Sony CDX-G3200UV Manual

24 August 2025
AXESS

AXESS AXI-HON1-R Manual

22 August 2025
AXESS

AXESS AXPIO-JL1 Manual

22 August 2025