Edge Boost Express SSD Manual

Edge Solid State-drev (ssd) Boost Express SSD

Læs gratis den danske manual til Edge Boost Express SSD (1 sider) i kategorien Solid State-drev (ssd). Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Edge Boost Express SSD, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

INSTALLING AS SECONDARY STORAGE (WINDOWS)

SYSTEM REQUIREMENTS

Version 0113-1.1

INTRODUCTION

● A system with an available PCIe (PCI Express) slot (x2 or greater)

6. The wizard will appear. Select New Simple Volume/Partition Next.

7. On the screen, ensure the Simple Volume size Specify Volume Size

number matches the maximum disk space (default). Select Next.

8. Assign a drive letter not already in use to the SSD. Select Next.

9. Choose a file system format (NTFS recommended for Windows) with a

default allocation unit size and give the SSD a Volume Label name. Check

perform a quick format enable file and folder and uncheck

compression. Click Next.

10. Review the wizard summary and select . The SSD will be Finish

formatted. Once complete, you can close Computer Management.

1. After installing the Boost Express SSD, boot into the operating system.

2. Right click on (or My Computer) and select Computer Manage.

3. Select in the left pane.Disk Management

4. You will receive an prompt—this will only apply to any Initialize Disk

unformatted devices you have installed (i.e. – the SSD). Choose

MBR, note the Disk number (such as Disk 1) and select OK.

5. In the bottom of Disk Management, find the disk number from step 5.

Right-click on the unallocated box and select New Simple Volume.

OPERATING SYSTEM INSTALLATION

INSTALLING AS SECONDARY STORAGE (WINDOWS) - contd

www.EDGEMemory.com/support

CUSTOMER SUPPORT

Need Help?

WARRANTY

The Boost Express SSD is backed by a 5-year warranty. This product is warranted to

be free of defects in materials and workmanship and to function in accordance with

manufacturer's specifications for the aforementioned warranty period. For more

information, please visit www.EDGEMemory.com.

PCIe 2.0 SOLID STATE DRIVE

Help getting started with your EDGE Boost Express Solid State Drive

Quick Start Guide

™

Thank you for purchasing the EDGE Boost Express Solid State Drive (SSD)!

This guide is designed to provide you information necessary to install and use

the SSD and software, as well as some precautions to adhere to.

Disassembling and reassembling covers, lids, bezels, and other items may be

required for installation. Please consult your system’s user manual or contact

an IT professional for assistance if you are unsure about the install process.

PRECAUTIONS

● Ensure all power sources are disconnected from the system before install.

● Do not expose the SSD to extreme temperatures or sunlight.

● Do not touch the gold PCIe connectors of the SSD.

● Wear a wrist strap while installing the SSD to minimize static electricity.

CONFIGURING RAID MODES

1. During boot, look for the and press CTRL + M to enter RAID OPTROM

the RAID configuration utility.

2. In the section, select and press Topology HBA 0: Marvell 0 ENTER.*

A dialog displaying Configuration Wizard will appear. Press again.ENTER

3. Select the member drives (SSD 2, SSD 3) by highlighting and RAID

pressing the . Afterwards, press SPACEBAR ENTER.

4. Highlight on the right side of the screen and press HyperDuo ENTER.

5. Select the mode (RAID 0, RAID 1) and press RAID ENTER.

a) If choosing RAID 0, configure the stripe size and virtual drive

name. Highlight and press Next ENTER.

b) If choosing RAID 1, configure the virtual drive name. Highlight

Next ENTER and press .

6. When the red Create Virtual Disk dialog box appears, press to continue.Y

7. Press to exit the RAID OPTROM utility.F10

* RAID 1 will result in a 50% decrease in overall SSD capacity

BOOST EXPRESS

HARDWARE INSTALLATION

1. The Boost Express SSD ships with a full height bracket attached. If

this product is to be installed in a low profile chassis, follow steps a)

and b) below. If not, please proceed to step 2.

a) Carefully remove the two screws fastening the bracket to the

PCIe carrier card.

b) Hold the low profile bracket in position and fasten the bracket

with the screws from step 1a. Do not over tighten.

2. Remove the side-panel from the computer case to expose the

computer’s internal components.

3. Using your motherboard manual for assistance, locate an available x2,

x4, x8, or x16 PCI-Express slot on the motherboard and remove the

metal cover from the case for that slot position. Set the screw aside

for later use.

4. Firmly insert the Boost Express SSD into the PCI-Express slot.

5. Use the screw from step 3 and fasten the bracket to the case.

6. Replace the side panel of the computer and power on the system.

1. In your computer’s BIOS, select the Operating System (OS) installation

media as the first boot device. Consult your system’s user manual for

detailed instructions on how to change the boot order.

2. A driver is not required for installation of Windows 7, Linux, or Mac

OS X. When asked where to install the OS, select the Boost Express

SSD and follow the operating system installation prompts.

3. Once installation is complete, select the Boost Express SSD as the

primary boot device.

1. After installing the Boost Express SSD, boot into the operating system.

2. Select when prompted. Navigate to the folder and Initialize Utilities

launch Disk Utility.

3. Select the Boost Express SSD in the left sidebar (the line that lists the SSD

capacity).

4. Select the tab (if there is no Partition tab, you have selected the Partition

wrong line).

5. Use Disk Utility's controls (volume scheme) to format the drive into a

single, large partition. Use " " as the Mac OS Extended (Journaled)

format type and name the volume appropriately.

6. Select and choose the proper partition scheme (“GUID” for Intel Options

Macs, ”Apple Partition Map” for Power PC Macs) and click . To OK

determine which Mac you have, click the Apple logo in the upper-left

portion of the screen, then About This Mac, and reference the processor.

7. Select and then select . After the partition is complete, Apply Partition

close Disk Utility.

INSTALLING AS SECONDARY STORAGE (MAC OS X)

The Boost Express SSD comes with a powerful AES hardware encryption chip.

When enabled, the SSD becomes impossible to access without knowing the

password. Visit www.EDGEMemory.com/support to learn more.

ENCRYPTION

Produkt Specifikationer

Mærke:	Edge
Kategori:	Solid State-drev (ssd)
Model:	Boost Express SSD

Har du brug for hjælp?

Hvis du har brug for hjælp til Edge Boost Express SSD stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Solid State-drev (ssd) Edge Manualer

Edge Boost Cache SSD Manual

1 September 2024

Edge Boost Pro Slim Manual

1 September 2024

Edge Boost Pro Manual

1 September 2024

Edge Boost Express SSD Manual

30 Juli 2024

Edge Boost SSD Manual

29 Juli 2024

Edge Boost Cache Manual

29 Juli 2024

Edge Boost Manual

20 Juli 2024

Solid State-drev (ssd) Manualer

Nyeste Solid State-drev (ssd) Manualer

Nedis HDDE25410BK Manual

14 Januar 2025

12 Januar 2025

29 December 2024

29 December 2024

29 December 2024

28 December 2024

Sabrent SB-1342-1TB Manual

21 December 2024

ADATA HV320 Manual

16 December 2024

ADATA HD770G Manual

16 December 2024

ADATA SE770G Manual

16 December 2024