EK Water Blocks EK-Pro GPU WB RTX 6000 Ada Manual

EK Water Blocks Ikke kategoriseret EK-Pro GPU WB RTX 6000 Ada

Læs gratis den danske manual til EK Water Blocks EK-Pro GPU WB RTX 6000 Ada (14 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 2 anmeldelser. Har du et spørgsmål om EK Water Blocks EK-Pro GPU WB RTX 6000 Ada, eller vil du spørge andre brugere om produktet?

Side 1/14
USER GUIDE
GPU WATER BLOCK
EK-PRO
GPU WB RTX 6000 ADA Nickel Inox
Before you start using this product, please follow these basic guidelines:
Carefully read the manual before beginning with the
installation process.
Remove your graphics card from the computer for the safest
GPU or its circuit board (PCB).
EK Fittings require only a small amount of force to screw
them firmly in place since the liquid seal is ensured with the
rubber O-ring gaskets.
The use of quality market-proven corrosion-inhibiting
coolants is always strongly recommended for any liquid
cooling system.
Do not use pure distilled water as a cooling liquid! For best
results, EK recommends the use of EK-CryoFuel Coolants.
Make sure to bleed air out of your water block thoroughly in
order to reach optimal performance.


Produkt Specifikationer

Mærke: EK Water Blocks
Kategori: Ikke kategoriseret
Model: EK-Pro GPU WB RTX 6000 Ada

Har du brug for hjælp?

Hvis du har brug for hjælp til EK Water Blocks EK-Pro GPU WB RTX 6000 Ada stil et spørgsmål nedenfor, og andre brugere vil svare dig