EK Water Blocks EK-Quantum Vector Strix RTX 3070 Manual

EK Water Blocks Ikke kategoriseret EK-Quantum Vector Strix RTX 3070

Læs gratis den danske manual til EK Water Blocks EK-Quantum Vector Strix RTX 3070 (15 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om EK Water Blocks EK-Quantum Vector Strix RTX 3070, eller vil du spørge andre brugere om produktet?

Side 1/15
USER GUIDE
GPU WATER BLOCK
EK-Quantum
Vector Strix RTX 3070
Before you start using this product, please follow these basic guidelines:
Carefully read the manual before beginning with the
installation process.
Remove your graphics card from the computer for the safest
GPU or its circuit board (PCB).
EK Fittings require only a small amount of force to screw
them rmly in place since the liquid seal is ensured with the
rubber O-ring gaskets.
The use of quality market-proven corrosion-inhibiting
coolants is always strongly recommended for any liquid
cooling system.
Do not use pure distilled water as a cooling liquid! For best
results, EK recommends the use of EK-CryoFuel Coolants.
Make sure to bleed air out of your water block thoroughly to
reach optimal performance.


Produkt Specifikationer

Mærke: EK Water Blocks
Kategori: Ikke kategoriseret
Model: EK-Quantum Vector Strix RTX 3070

Har du brug for hjælp?

Hvis du har brug for hjælp til EK Water Blocks EK-Quantum Vector Strix RTX 3070 stil et spørgsmål nedenfor, og andre brugere vil svare dig