EK Water Blocks EK-Quantum Vector RX 6800/6900 Manual

EK Water Blocks Ikke kategoriseret EK-Quantum Vector RX 6800/6900

Læs gratis den danske manual til EK Water Blocks EK-Quantum Vector RX 6800/6900 (15 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 2 anmeldelser. Har du et spørgsmål om EK Water Blocks EK-Quantum Vector RX 6800/6900, eller vil du spørge andre brugere om produktet?

Side 1/15
USER GUIDE
GPU WATER BLOCK
EK-Quantum
Vector RX 6800/6900
Before you start using this product, please follow these basic guidelines:
Carefully read the manual before beginning with the
installation process.
Remove your graphics card from the computer for the safest
mounting process to prevent any possible damage to your
EK Fittings require only a small amount of force to screw
them rmly in place since the liquid seal is ensured with the
rubber O-ring gaskets.
The use of quality market-proven corrosion-inhibiting
coolants is always strongly recommended for any liquid
cooling system.
Do not use pure distilled water as a cooling liquid! For best
results, EK recommends the use of EK-CryoFuel Coolants.
Make sure to bleed air out of your water block thoroughly in
order to reach optimal performance.


Produkt Specifikationer

Mærke: EK Water Blocks
Kategori: Ikke kategoriseret
Model: EK-Quantum Vector RX 6800/6900

Har du brug for hjælp?

Hvis du har brug for hjælp til EK Water Blocks EK-Quantum Vector RX 6800/6900 stil et spørgsmål nedenfor, og andre brugere vil svare dig