Elation TVL4000 II Manual

Elation Lys TVL4000 II

Læs gratis den danske manual til Elation TVL4000 II (10 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Elation TVL4000 II, eller vil du spørge andre brugere om produktet?

Side 1/10
User Manual
TVL4000 II
12/14
©Elation Professionals® - www.elationlighting.com - TVL4000 II User Manual Page 2
TVL4000 II General Information
Unpacking: Thank you for purchasing either the TVL4000 II by Ela-
tion Professionals®. Every TVL4000 II has been thoroughly tested and
has been shipped in perfect operating condition. Carefully check the
shipping carton for damage that may have occurred during shipping.
any damage and be sure all equipment necessary to operate the unit
has arrived intact. In the event damage has been found or parts are
missing, please contact our toll free customer support number for fur-
ther instructions. Please do not return this unit to your dealer without
contacting customer support rst.
Introduction: The TVL4000 II is a DMX intelligent LED fixture. The
TVL4000 II has 3 DMX channel modes; Mode 1 is 2 DMX Channels,
Mode 2 is 2 DMX Channels, and Mode 3 is 3 DMX Channels. This
The TVL4000 II can be run as stand alone unit or in a master-slave
configuration.
Customer Support: Elation Professionals -® provides a toll free cus
tomer support line, to provide help and to answer any question should
you encounter problems during your set up or initial operation. You
may also visit us on the web at www.elationlighting.com for any com-
ments or suggestions. Service Hours are Monday through Friday 8:00
a.m. to 4:30 p.m. Pacic Standard Time.
Voice: (323) 582-3322
Fax: (323) 832-9142
E-mail: support@elationlighting.com
To purchase parts online visit http://parts.elationlighting.com
Warning! To prevent or reduce the risk of electrical shock or re, do
not expose this unit to rain or moisture.
Warning! This may cause severe eye damage. Avoid looking directly
into the light source at all times!
©Elation Professionals® - www.elationlighting.com - TVL4000 II User Manual Page 3
3 DMX Channel Modes: Mode 1 is 2 DMX Channels, Mode 2 is 2
DMX Channels, & Mode 3 is 3 DMX Channels
2 Operating Modes - Manual Mode & DMX Control
Digital Display for Address and Function Setting
TVL4000 II Features
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures
warranty. In the unlikely event your unit may require service please
contact Elation Professionals .®
During operation the housing may become hot. Avoid touching the
unit with bare hands while in use.
Elation Professionals® will not accept any liability for any resulting
damages caused by the non-observance of this manual or any unau-
thorized modication to this unit.
TVL4000 II Handling Precautions
TVL4000 II Warranty Registration
out the enclosed warranty card to validate your purchase and war-
ranty. You may also register your product online at www.elationlight-
ing.com. All returned service items whether under warranty or not,
must be freight pre-paid and accompany a return authorization (R.A.)
n umber. If the unit is under warranty you must provide a copy of your
proof of purchase invoice. Please contact customer support Elation®
for a R.A. number.
To optimize the performance of this product, please read these
operating instructions carefully to familiarize yourself with the basic
operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please
keep this manual with the unit, for future reference.
TVL4000 II General Instructions
For Your Own Personal Safety, Please Read and Understand This
Manual Completely Before You Attempt To Install Or Operate
This Unit!
To reduce the risk of electrical shock or re, do not expose this unit
rain or moisture
Do not spill water or other liquids into or on to your unit.
Do not attempt to operate this unit if the power cord has been
frayed or broken.
Do not attempt to remove or break o the ground prong from
the electrical cord. This prong is used to reduce the risk of electrical
shock and re in case of an internal short.
Disconnect from main power before making any type of connection.
Do not remove the cover under any conditions. There are no user
serviceable parts inside.
Never operate this unit when it’s cover is removed.
Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
Do not attempt to operate this unit, if it becomes damaged.
This unit is intended for indoor use only, use of this product out-
doors voids all warranties.
Always mount this unit in safe and stable matter.
Power-supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience recep-
tacles, and the point where they exit from the appliance.
• Cleaning -The fixture should be cleaned only as recommended by
the manufacturer. See page 16 for cleaning details.
Heat -This fixture should be situated away from heat sources such
as radiators, heat registers, stoves, or other appliances (including
amplifiers) that produce heat.
The fixture should be serviced by qualified service personnel when:
A. Objects have fallen, or liquid has been spilled into the appliance.
B. The appliance has been exposed to rain or water.
C. The appliance does not appear to operate normally or exhibits a
marked change in performance.
TVL4000 II Safety Precautions
©Elation Professionals® - www.elationlighting.com - TVL4000 II User Manual Page 4


Produkt Specifikationer

Mærke: Elation
Kategori: Lys
Model: TVL4000 II

Har du brug for hjælp?

Hvis du har brug for hjælp til Elation TVL4000 II stil et spørgsmål nedenfor, og andre brugere vil svare dig