Electro-Voice Sx300PIX Manual

Electro-Voice Højttaler Sx300PIX

Læs gratis den danske manual til Electro-Voice Sx300PIX (10 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Electro-Voice Sx300PIX, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/10

Description

The Electro-Voice Sx300 is a 300-watt,

12-inch two-way, high-efficiency, con-

stant-directivity compact speaker system

with Ring-Mode Decoupling (RMDTM).

Through the extensive use of computer-aided

design and modeling, Electro-Voice engi-

neers have developed a state-of-the-art pro-

fessional loudspeaker system.

The high-frequency section of the Sx300

utilizes a molded-in, 65° x 65° constant-di-

rectivity horn. This unique pattern contrib-

utes to high intelligibility. Vocals sound natu-

ral yet “cut through” in reverberant, noisy

rooms. In addition, the coverage pattern is

unusually uniform over its range of opera-

tion. Sound quality off axis is very well

maintained, even at 45° off axis (a 90° total

coverage angle), well beyond the rated cov-

erage angle. The horn’s unique, VaripathTM

throat geometry helps direct driver output to

the corners of the room, points of coverage

not described in the usual specifications of

horizontal and vertical coverage angles, and

parts of the audience that typically do not

receive the strongest coverage.

One of the many other unique features of

the Sx300 is the cabinet. Constructed of high-

impact polypropylene structural foam, it pro-

vides a stiff and extremely durable enclo-

sure. Molded into the cabinet are an integral

carrying handle and a stand socket for

mounting on 1 3/8-inch stands such as the

Electro-Voice 100BK. Rubber feet that are

attached to the bottom of the cabinet and mat-

ing sockets that are molded into the top pro-

vide a means of stacking systems. The trap-

ezoidal-shaped cabinet, in combination with

the uniform, 65° x 65° directivity character-

istics, make the Sx300 ideal for use alone or

in arrays.

In situations requiring additional bass out-

put, the Sx300 can be used in combination

with the Electro-Voice Xp200A system con-

troller. The Xp200A includes a low-fre-

quency enhancement circuit that is tailored

to match the low-frequency characteristics

of the Sx300. Up to 12 dB of additional bass

output can be obtained from the system when

used with the Xp200A system controller. The

amount of low-frequency enhancement can

be adjusted to suit the user’s personal pref-

erence.

For the most demanding situations, two bass-

module models are available to complement the

Sx300: the Electro-Voice Sb121 nonpowered

bass module and the Electro-Voice Sb121a pow-

ered bass module. Both bass modules were de-

signed to be used with the Sx300 and are

constructed in similar structural foam enclo-

sures. The Sb121a includes a 300-watt power

amplifier that is built into the speaker cabi-

net. The Xp200A system controller provides

a subwoofer output that is a crossed-over

sum of the left and right channels.

The Sx300’s high-frequency horn is driven

by the DH2010A one-inch-throat, wide-

bandwidth, titanium-diaphragm driver. The

DH2010A uses a unique, convex-drive

Time PathTM phasing plug structure (U.S.

Patent #4,525,604) for smooth and ex-

tended high-frequency performance. The

voice coil is coupled to the diaphragm with

EV’s exclusive Resonant DriveTM technol-

ogy. This increases and smooths the high-

frequency response and reduces the amount

of internal equalization required for flat fre-

quency response. Driver output extends to

25,000 Hz. A self-resetting high-frequency

protection circuit, EV’s PROTM circuit, is

included with the Sx300 to prevent against

accidental overdrive and improve system

reliability. If the input power to the high-fre-

quency driver exceeds the nominal rating,

the protection circuit is activated and reduces

Sx300

300-Watt Two-Way

Compact Speaker

System

• Ring-Mode Decoupling (RMDTM) for

increased intelligibility

• Durable structural-foam enclosure with

integral handles and stand mount

• DL12Sx 12-inch woofer and DH2010A

compression driver for great sound and

reliable performance

• Molded-in constant-directivity 65° x 65°

high-frequency horn

• Stand mountable and arrayable

• Molded-in attachment points for secure

suspension with optional brackets

• Dual Neutrik Speakon® high-current

connectors (Sx300E) or 1/4-in. phone

jacks (Sx300P)

• Also available in white (Sx300W)

1. Speakon® is a registered trademark of Neutrik Inc.

Produkt Specifikationer

Mærke:	Electro-Voice
Kategori:	Højttaler
Model:	Sx300PIX

Har du brug for hjælp?

Hvis du har brug for hjælp til Electro-Voice Sx300PIX stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Electro-Voice Manualer

Electro-Voice EVH-1152S Manual

20 November 2025

Electro-Voice ZLX-G2 Manual

19 November 2025

Electro-Voice ZLX‑15P‑G2 Manual

4 August 2025

Electro-Voice Evid 4.2T Manual

30 Juli 2025

Electro-Voice EVID 6.2 Manual

29 Juli 2025

Electro-Voice EVH-1152S/99 Manual

22 Januar 2025

Electro-Voice XLE191-FG Manual

8 Januar 2025

Electro-Voice Sx600 Manual

8 Januar 2025

Electro-Voice Sb122 Manual

8 Januar 2025

Electro-Voice Tour X TX1122FM Manual

2 Oktober 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Energy Sistem TempoRave Manual

11 December 2025

RCF C 5215-W MKIII Manual

10 December 2025

RCF X 28 L Manual

10 December 2025

Fostex PM0.4d Manual

8 December 2025

Amphion Argon 3LX Manual

8 December 2025

Amphion Argon 7LX Manual

8 December 2025

8 December 2025

8 December 2025

7 December 2025

7 December 2025