Elite ProAV Yard Master Pro 2 Manual

Elite ProAV Projektionslærred Yard Master Pro 2

Læs gratis den danske manual til Elite ProAV Yard Master Pro 2 (5 sider) i kategorien Projektionslærred. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Elite ProAV Yard Master Pro 2, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/5
JA12112018 1 www.eliteproav.com
Yard Master Pro 2 Series
Indoor/Outdoor Folding-Frame Portable Projection Screen
User’s Guide
Thank you for choosing the Yard Master Pro 2 portable projection screen! Please read this user guide
before utilizing the screen. Correct usage and maintenance will ensure a long product life
Care & Use Instructions
◆ Elite highly recommends two people to assemble the Yard Master Pro 2 screen.
◆Dust, dirt and scratches on the projection surface will affect the picture quality, please take note of the
points below to prevent that from occurring:
1. Do not touch the projection surface with your hands
2. Do not write or draw on the projection surface
3. Do not use fingers or sharp objects to point on the projection surface; this will damage the screen
material.
4. Use a soft-damp cloth to clean the projection surface; do not use chemical cleaning agents or alcohol.
5. Use clean water when dampening the cleaning cloth and do not rub against the material to clean it.
◆After using the screen, disassemble it and store it in the carrying bag provided.
◆To avoid damage and injury, the screen should only be operated by adults.
Product Description
Design: The aluminum frame is designed to be light weight and easily operated making it easy to carry,
assemble and disassemble.
Projection Screen Surfaces: The screen surface is attached to the rectangular frame and held in place by
snap buttons, which ensure an evenly stretched and flat surface. The screen materials are durable and can
be folded many times without causing damage or distortion to the surfaces.
Correct usage of the projection screen will ensure better viewing results.
For front projection (CineWhite®), assemble and view the screen as indicated in Fig.1.
For rear projection (WraithVeil), assemble and view the screen as indicated in Fig. 2.
Fig. 1
Fig. 2
JA12112018 2 www.eliteproav.com
Hardware and Parts List
A. Folding frame x1
B. Left and right folding legs p2-x2
C. Knob Screw (Refer to Chart)
D. Front Projection screen material x1
E. Screen material bag x1
F. Carrying Bag x1
G. Rope p2-x2
H. Eyebolt p2-x2
I. Stake p2-x4
Note: The parts list above is subject to change without notice.
Models
Knob Screw
Max Height
145” (16:9)
10 pcs
133.5 inches
180” (16:9)
10 pcs
159.8 inches
200” (16:9)
14 pcs
149.6 inches
Frame Assembly
1. Take the folding frame (A) out of the carrying bag (F) and place it on a flat surface. Fully unfold the
longer sections first, as shown below.
2. Next, unfold the frame until the latch on the hinge “clicks” into place. Repeat the procedure for the
shorter sections, as shown below.

Produkt Specifikationer

Mærke: Elite ProAV
Kategori: Projektionslærred
Model: Yard Master Pro 2

Har du brug for hjælp?

Hvis du har brug for hjælp til Elite ProAV Yard Master Pro 2 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Projektionslærred Elite ProAV Manualer

Elite ProAV

Elite ProAV Yard Master Pro 2 Manual

2 September 2024
Elite ProAV

Elite ProAV Saker Tab-Tension Manual

2 September 2024
Elite ProAV

Elite ProAV Planate Tab-Tension Manual

2 September 2024

Projektionslærred Manualer

Nyeste Projektionslærred Manualer

EPV

EPV PMT110HT3-ISF Manual

3 April 2025
EPV

EPV EF125C-A4K Manual

3 April 2025
ORAY

ORAY DRAGONFLY 101 x 180 Manual

2 April 2025
Da-Lite

Da-Lite Cinema Vision Manual

1 Oktober 2024
Da-Lite

Da-Lite Perm-Wall 78676 Manual

26 September 2024
Draper

Draper Clarion Manual

22 September 2024
Pyle

Pyle PRJSM1006 Manual

19 September 2024
Draper

Draper Luma 207008 Manual

6 September 2024
EPV

EPV PGF106WH1-A4K Manual

5 September 2024
EPV

EPV PGF84WH1 Manual

5 September 2024