Elite Screens Q100V Manual

Elite Screens Projektionslærred Q100V

Læs gratis den danske manual til Elite Screens Q100V (10 sider) i kategorien Projektionslærred. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Elite Screens Q100V, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/10

Rev043010-JA

www.elitescreenscom info@elitescreens.com

QuickStand Series

Portable Frame-Folding Projection Screen

User s Guide ’

Rev043010-JA

www.elitescreenscom info@elitescreens.com

Setup Procedure

The frame and supports are made of 1 3/8” aluminum tubing with an anodized finish. Please follow the

instructions in this package. With proper care, your QuickStand screen will provide many years of reliable

service.

fig 2

Top

fig 1

fig 3

Lock down the corners

Snap latch

Top

Two Section Frame

(For presentation screens that are less than 120” in diagonal

measurement)

1. Take the frame out of the case and remove its wrappings.

Unfold the main joints as shown in (fig 1).

2. Once the main joints are unfolded, make sure that the snap

latches “click” into the locked position. The frame should now

be fully elongated as in (fig2). *Note: The snap latches will

automatically lock when the joint is straightened. Press the

snap latch button in order to release the lock.

3. While holding the bottom of the frame in place, lift the top of

the frame to unfold the sides which will cause the snap latches

lock when fully extended. Secure the corner braces into the

locked position. The screen frame should now be fully opened

as in (fig 3).

Produkt Specifikationer

Mærke:	Elite Screens
Kategori:	Projektionslærred
Model:	Q100V
Vægt:	62300 g
Produktfarve:	Sølv
Naturligt aspektforhold:	4:3
Synlig skærmbredde (W):	2032 mm
Synlig skærmhøjde (H):	1524 mm
Diagonal:	100 "
Skærmforstærkning:	1.1