Elite Screens Tripod T99UWS1 Manual

Elite Screens Projektionslærred Tripod T99UWS1

Læs gratis den danske manual til Elite Screens Tripod T99UWS1 (3 sider) i kategorien Projektionslærred. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Elite Screens Tripod T99UWS1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Rev. 0 17 DR511 0 www.elitescreens.com

Tripod Portable Projection Screen

Tripod Series / Tripod Pro Series

USER’S GUIDE

Tripod Screen Parts Identification

Using the Screen

A. : Setting up the screen

Follow the steps below and Fig. 1 & 2.

1. Place the screen in an upright position (fig.1) with the legs toward the ground.

2. Deploy the Tripod Support legs by pushing down on the Tripod Junction.

Top Hook, Keystone

Eliminator & Screen Handle

Vertical locking sleeve ring

Support beam

Vertical

Extension Bar

Screen Material

Screen case

Carrying handle & Screen height

adjustment lock/release tab

Tripod junction

Tripod Support Legs

End cap

Rev. 0 17 DR511 1 www.elitescreens.com

3. Turn the tripod’s screen -degree horizontal position casing in a 90 so that the screen casing is now

parallel to the ground with the screen handle facing the bottom of the top hook.

4. Completely extend the they are stable legs as much as possible so and position them away from

objects that may interfere with their balance. DO NOT stand the tripod on an unstable platform to avoid

an injury should the tripod screen collapse.

B. n:Preparing the tripod screen for projectio

Follow the steps below and Fig. 3.

1. Pull the screen handle up vertically and hook the screen handle on . the Top Hook

*Note: Use the Keystone Eliminator to prevent “Keystone Effect” from occurring. Keystone Effect is

caused when a projector presents its image at a downward angle causing a trapezoid-shaped image to

appear on the screen. The Keystone Eliminator is designed to eliminate that effect by sloping the screen

forward.

2. Twist the Vertical Locking Sleeve Ring -counter

clockwise Vertical to unlock the current position of the

Extension Bar and raise it as necessary to the desired

height .

3. Pull the Screen ock/Height Adjustment L Release tab

out (to the left) located just above the Carrying Handle

to raise or lower the bottom of the. Once the desired

height has been set, push the tab in to lock the position in

place.

Fig. 2

Fig.1

Fig. 3

Produkt Specifikationer

Mærke:	Elite Screens
Kategori:	Projektionslærred
Model:	Tripod T99UWS1
Bredde:	1945 mm
Dybde:	70 mm
Højde:	2885 mm
Vægt:	7400 g
Naturligt aspektforhold:	1:1
Harmoniseret systemkode (HS):	90106000
Rammetype:	Sammenfoldningsramme
Drevtype:	Vejledning
Synlig skærmbredde (W):	1778 mm
Synlig skærmhøjde (H):	1778 mm
Diagonal:	99 "
Skærmforstærkning:	1.1
Kanter:	38 mm
Farve på etui:	Sort