Elro AS80CA11A Manual

Elro Sikkerhed AS80CA11A

Læs gratis den danske manual til Elro AS80CA11A (4 sider) i kategorien Sikkerhed. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Elro AS80CA11A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

AS80CA11A

1080P IP Camera

Installation Instructions

General Introduction

The IP Camera is designed to monitor the premise where it is installed at in real

time, and send the images to the Gateway. The recording function will be

activated if an event is triggered under warning conditions. Its great compatibility

with our U-Net family security products makes it suitable for smart home cloud

based platform.

Product Layout

Front view Rear view Side view

Connecting camera to home Wi-Fi

The camera first needs to connect to your home Wi-Fi network. There are two

methods to do this

Method 1: By QR code setup. A smartphone installed with ELRO Smart Home

Alarm App is required.

1. On the ELRO Smart Home Alarm App, go to System page and tap the QR

code icon on the top bar.

2. Enter your home Wi-Fi network and your Wi-Fi password, if any.

3. The App will then generate a large size QR code image. Leave the App on

that page.

4. Power up the camera using the supplied power adaptor and wait for a

musical tone. This usually takes about 30 seconds.

The musical tone indicates the camera is ready to scan the QR code created

earlier by the App.

Microphone

Lens

IR LED (hidden)

LED indicator

Reset/WPS button

Power jack

Micro-SD card slot

5. Place the QR code at about 10cm in front of the camera lens.

6. If the QR code scan is successful, a musical tone will be heard. The camera

will then attempt to connect to the home network.

Note : If there is no musical tone after 30 seconds, try moving the

smartphone further away from the camera in gradual steps.

Method 2: By WPS setup. This requires your home router to support WPS.

1. Power up the camera using the supplied power adaptor and wait for the

musical tone. This usually takes about 30 seconds.

2. Using a sharp pin, briefly press the reset button for 1 second and release.

3. Within one minute, press the WPS button on your home router.

4. When camera has established connection with the router, a musical tone will

be heard.

Binding with Smart Home

1. Log into the Smart Home account from a web browser.

2. Select “System”, then “Add a device”.

3. Select “Camera”.

4. Enter the Access Code on the label behind the camera and click “Next step”

5. The screen below will appear if the process is successful.

Access Code

label

Produkt Specifikationer

Mærke:	Elro
Kategori:	Sikkerhed
Model:	AS80CA11A

Har du brug for hjælp?

Hvis du har brug for hjælp til Elro AS80CA11A stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Sikkerhed Elro Manualer

Elro AB600P - MOTION DETECTOR Manual

17 September 2024

Elro AG40KE Manual

17 September 2024

Elro AG40PR Manual

24 August 2024

Elro ARD51 - V3 Manual

23 August 2024

Elro C903IP.2 Home Monitor Manual

23 August 2024

Elro C904IP.2 Home Monitor Manual

19 August 2024

Elro AS80RE11 Manual

16 August 2024

Elro C803IP.2 Home Monitor Manual

13 August 2024

Elro AP5500 - Pro Alarm System Manual

10 August 2024

Elro C703IP Manual

10 August 2024

Sikkerhed Manualer

Nyeste Sikkerhed Manualer

Aritech SHATTERPRO 3 Manual

15 Januar 2025

Axis Camera Station S9001 Mk II Desktop Terminal Manual

15 Januar 2025

Eminent EM6511 Manual

15 Januar 2025

Ranex RX2567-Z Manual

11 Januar 2025

NetworX NX-595E IP Communication Module Manual

5 Oktober 2024

Provision-ISR NVR2-4100P Manual

23 September 2024

Gira 0342 Manual

23 September 2024

Unitron Smart Alert Systeem Manual

23 September 2024

Netatmo Welcome Manual

21 September 2024

NetworX NX-408 Manual

20 September 2024