Elvid FBP-PD28 Manual


Læs gratis den danske manual til Elvid FBP-PD28 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Elvid FBP-PD28, eller vil du spørge andre brugere om produktet?

Side 1/4
USER
MANUAL
MONITOR BATTERY PLATE
For Sony L-Series, Canon LP-E6,
and Panasonic D28 batteries
FOR: FBP-F970 / FBP-LPE6 / FBP-PD28
Before proceeding, remove the battery from your Elvid
monitor, and make sure that the monitor is unplugged and
turned off.
1. Use a Phillips-head screwdriver (not included) to
unscrew and remove your Elvid monitor’s existing
battery plate, including the wires connecting it to the
back of the monitor.
2. Place the Elvid FBP battery plate’s red wire on the
positive terminal, and the black wire on the negative
terminal. Insert the two included big screws into the
terminals, and use a Phillips-head screwdriver to
fasten them until fully tightened. Be careful not to
overtighten.
3. Position the FBP battery plate with the open side
facing the top of the monitor. Align the battery plate’s
screw holes with the monitor’s screw holes. Make
sure the battery plate covers the red and black wires
completely and that no part of the wires is exposed.
INSTRUCTIONS Installing the Battery Plate
2


Produkt Specifikationer

Mærke: Elvid
Kategori: Ikke kategoriseret
Model: FBP-PD28

Har du brug for hjælp?

Hvis du har brug for hjælp til Elvid FBP-PD28 stil et spørgsmål nedenfor, og andre brugere vil svare dig