Emerson CKS9031 Manual

Emerson Ikke kategoriseret CKS9031

Læs gratis den danske manual til Emerson CKS9031 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Emerson CKS9031, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

128

Selecting The Alarm Mode

Your SmartSet

clock radio allows you to select from among three different alarm

operation modes for either alarm. The alarm modes are:

•Everyday –The alarm will turn on all 7 days.

•Weekdays only –The alarm will only turn on Monday through Friday

;

•Weekends only –The alarm will only turn on Saturday and Sunday.

To check the Alarm Mode setting for Alarm 1, depress the ALARM 1 setting button.

The display will show the Alarm 1 wake up time and the “Day Of The

Week”indicators

will show you the alarm mode which is selected.

Release the andALARM MODE ALARM 1 setting buttons and the display will

return to the correct time.

Follow the same procedure to select the desired Alarm Mode for Alarm 2 if

necessary.

To change the Alarm Mode setting for Alarm 1, h

old the ALARM 1 setting button

and p

ress the button until the Day indicators show the desiredALARM MODE

mode setting, Weekdays only, Weekends only, or Everyday operation.

•If all 7

indicators are ‘On’, the Everyday mode

is selected.

•If only the M

onday through Friday indicators are

‘On’, the Weekdays only mode is selected.

•If only the S

aturday and Sunday indicators are

‘On’, the Weekends only mode is selected.

Checking The Wake Up Times And Alarm Mode

Whenever you want to check the wake up time or the alarm mode settings, simply

press either the orALARM 1 ALARM 2 setting buttons. The display will change

from correct time to wake up time and the day indicators will show you the alarm

mode which is currently selected.

Release the ALARM 1 ALARM 2or setting buttons to return to correct time.

1511

MON TUE WED THU FRI SAT SUN

ALARM

ALARM 1 ALARM 2

CR2032

Tuesday

2008

CKS9051/CKS9031

CKS9051/CKS9031-902-02

twice

“ ”

FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE

PLEASE CALL:

1-800-898-9020 OR

1-800-695-0098 OR

E-MAIL TO: internet@emersonradio.com

Send your unit to:

Emerson Returns Facility

11500 Philadelphia ST

Mira Loma, CA 91752

ATTN:Returns Department

MON TUE WED THU FRI SAT SUN

MON TUE WED THU FRI

SAT SUN

Listening To The Radio

Digital Radio Frequency Display

1.) Set the selector switch to the desired band, orBand AM/FM AM FM.

2.) Set the control to a low setting. VOLUME

3.) Press the button to turn the radio ‘On’. The display changesRADIO ON/OFF

from time to an or radio frequency display.AM FM

4.) Turn the control to the leftside to select higher numberedTUNING

frequencies or to the right-side to select lower numbered frequencies.

to the clock radio jack with a cable with 2 ends 3.5mm stereo plug.AUX IN

3.) “ ” indicator will light on while jack is plugged in, and the radioAUX IN AUX IN

will change to AUX function.

4.) Start to play iPod,MP3 or other audio player, and set the player volume to

maximum.

5.) Adjust the main unit volume to your desired level.

6.) Stop the main unit and your iPod, MP3 or other audio player when finished

listening, and disconnect the cable from the jack.AUX IN

Remark:

Once the jack is plugged in,the alarm sound will be buzzer sound only AUX IN

while the alarm function is activated.

5.) Adjust the control to the desired setting.VOLUME

6.) When you are finished listening, press the button to turnRADIO ON/OFF

the radio ‘Off’.

Important: It is not necessary to tune to the exact frequency of your desired

station. Just rotate the TUNING control until you find the strongest signal and

the best reception, even if the frequency number on the display is higher or

lower than the actual station frequency.

3.) Set the selector switch for one or both alarms to the “ ”ALARM RADIO

position The appropriate ALARM 1 ALARM 2 and/or indicators will light up

to confirm that the alarms are set.

CR2032

AU898N

Produkt Specifikationer

Mærke:	Emerson
Kategori:	Ikke kategoriseret
Model:	CKS9031

Har du brug for hjælp?

Hvis du har brug for hjælp til Emerson CKS9031 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Emerson Manualer

Emerson ITM8110 Manual

30 Oktober 2025

Emerson CKS1855 Manual

20 September 2025

Emerson MW1101W Manual

19 September 2025

Emerson SR5999 Manual

19 September 2025

Emerson MW8106W Manual

19 September 2025

Emerson BAR800 Manual

19 September 2025

Emerson PD3500RD Manual

18 September 2025

Emerson CR519B Manual

18 September 2025

Emerson SCR120 Manual

18 September 2025

Emerson CKS1702 Manual

18 September 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Calorex Delta DT 6 Manual

30 Oktober 2025

Eliminator Lighting LED Cloud Manual

30 Oktober 2025

Abus Smartvest Pro APP45000 Manual

30 Oktober 2025

Owon OWH80 Manual

30 Oktober 2025

SilentiumPC Navis EVO ARGB 120 Manual

30 Oktober 2025

Iogear GRSH02 Manual

30 Oktober 2025

Russell Hobbs Inspire 24363-70 Manual

30 Oktober 2025

EKO K550UDGC Manual

30 Oktober 2025

APC NetShelter AP7900B Manual

30 Oktober 2025

Philips Evnia 32M3C3540 Manual

30 Oktober 2025